No hay artículos en el carro
No hay artículos en el carroAlan
Comentado en los Estados Unidos el 12 de marzo de 2025
This is indeed the Tecsun. It works well at improving AM reception with most radios.
Ken
Comentado en los Estados Unidos el 11 de agosto de 2024
The antenna is branded as a Tecsun AN-200. This is a bonus because Tecsun is a good company and they apparently sell it through various suppliers going under different brand names. This made the antenna cheaper in price.This AM antenna really pulls in the stations and reduces noise clutter. I found that it actually works better if you put the radio inside the loop without hooking it up with the cord. Simply aim it toward the transmitter, tune the station on the radio, and then turn the knob on the antenna to tune the antenna to your frequency. I see about a 40 dBu increase in gain. This antenna works well indoors too.To work this antenna without plugging it into your radio’s antenna port, it must have an internal AM ferrite AM antenna to magnetically couple with the loop. Down in the picture is a Qodosen DX-286 that has an internal ferrite. If your radio has no ferrite, you can just plug it into the standard 3.5mm standard antenna input.
Peter M
Comentado en Australia el 19 de noviembre de 2024
This product is perfect for my radio signal enhancement needs. I have a Yamaha amplifier which requires an external aerial. The usual wired loop for AM signals does not work well indoors. Putting the wired loop section in this product’s loop and tuning on the product gives a perfect reception result. Very happy.
Customer
Comentado en los Estados Unidos el 14 de octubre de 2024
No improvement perceived using this device
lc-usa
Comentado en los Estados Unidos el 30 de junio de 2023
On a Degen radio I am able to listen to AM radio stations from Reno , ˜150 miles away during daytime. Not possible with the internal ferrite antenna alone. If I place a VX-3 radio from Yaesu inside the loop I can actually hear signals on the AM band ; ) Their antenna is pretty poor and the receiver on AM medium wave is pretty deaf so you need all the help you can and this antenna does the trick. It can't perform miracles, but it certainly improves reception. One thing I noticed though is that the antenna jack is pretty much useless. Inductively coupled reception works great, attaching the antenna to the antenna input with the short cable which came with the antenna did not get me any good results. I tried on different receivers to see if its a problem with the Degen. Loose connection inside? I don't know but as long as it works nicely with the inductively coupled method (= those receivers need to have a ferrite core / bar antenna or else it does not work!), I am all fine and if I find the issue (be it with the radios /receivers or the antenna) I'll update the review accordingly.
Productos recomendados