jim duncan
Comentado en los Estados Unidos el 1 de noviembre de 2020
Iv'e been using the Supco SL300th dta logger for 3 years in a drying operation where the keeping track of the temp an humidity are fairly important. I'm using a 65ft USB booster cable hooked up to win 7 and to date it's been rock solid. And I have no concern about losing the data like I did when I was using a Davis weather monitor.Does a really good job.amended 5/29/21This review about the about the 2nd sl300th logger that I've recently had a problem with. The first one that i recommended refused to be recognized by win 7 in Dec. 2020. Even though tech support tried to help, win 7 just refused to recognize it. So I purchased another at the end of Dec. 2020. Plugging it in to the computer win 7 found it and it had been working correctly until 29th of May 2021 when the same thing happened that happened to the original logger. win7 couldn't find it. So I've ordered a 3rd one and if when it's plugged in, it works then I have to assume that it's the logger not my computer. If it does work then my current one is going to be sent back to Supco to see if they can figure out what's going on. It's possible that the "signature" is being wiped out. B ut they will have to say.I will amend this review when I have further info. But right now be I don't recommend this logger. Especially if you need the data.
AR
Comentado en Canadá el 16 de febrero de 2019
Simple et efficace si écran non requis
Hughbie
Comentado en los Estados Unidos el 27 de junio de 2018
Super data logger. I use it in air conditioning, refrigeration, and green house applications.It’s not water proof tho! Protect it with a plastic bag where it could come in contact with water through hose spraying or diggers.
0
Comentado en los Estados Unidos el 14 de enero de 2015
awesome, just this to set the levels on my two humidifiers in the basement that are always wrong and now i know that each is off by at least 5% and the other is off by 10% ish. my home thermostat also controls the humidity in the winter time and that was also off by a large amount. so this let me measure and make sure the humidity was properly set in the house. also adjusted the thermostate calibration to match to this unit.used it in my kegerator to get the temp in there and to log that my brand new fridge was not working to get a new one sent out. used it in the fridge to set the temp in the fridge/freezer and also in the spare fridge with the (1-6) dial, so i have a good temp on a specific number. use it in my camper / summer winter to log the temp inside/outside to keep it in good shape.overall love it so far, two years no issues. nice graphs/charts with the software downloads to pc/windows no problems. love it.
Curtis H Hisel
Comentado en los Estados Unidos el 2 de febrero de 2014
I bought my first Supco SL200 about 8 years ago, it served me well. I used the 200 to check out suspect refrigerators then give the graph to our professional appliance repair guy, they also used the SL200. The SL 200 was great, but it had a "serial" connection, so it was becoming hard for me to be able to use it on other computers. Our appliance repairman had already purchased the SL300T in 2010. The 300T has a USB interface and a lot more memory. The battery is easier to replace, etc. etc. . The graph is about the same as the 200T, but you have a lot more days you can record! A plus point was that it came with a very long cable, (my USB ports are on the back!). I purchased the SL300TH, (the H stands for Humidity) so I could do more than just refrigerators. So far, I have used it to check the temp and humidity in my house, (I live on the Oregon coast), and several other coastal houses. The graph is great when I need to demonstrate to tenants how the temperature in there house correlates to the moisture on their windows. In short, I love this SL300TH, just in case you did not already get that. Curtis