No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Jacob Kennedy
Comentado en los Estados Unidos el 8 de marzo de 2025
This case is great, I’d give five but the included fans were a bit loud so I replaced them with better fans. Case temps are steady at 79 degrees Fahrenheit. 4090 looks amazing vertically.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
Crush Bowman
Comentado en los Estados Unidos el 27 de marzo de 2025
First and foremost, Fantastik case! build quality, design and easy to build in. ONE exception, It is in fact, Rear Connector motherboard capable, it is not that easy. A couple of required cables extend out past the plane of the back to be able to get rear conver on. It CAN be done, its just a lot of stress on the cable connectors to the motherboard. Wish I could give it 3.5 stars...All the pieces fit nicely, the airflow is very good and the case in general stays cool.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
E's
Comentado en los Estados Unidos el 9 de febrero de 2025
One of the easiest cases I've ever built in. Super compatible and customizable. Good thermals. Build quality felt great. Looks really good, and very good price, especially with included fans. So far the best top Motherboard IO header placement. Really easy to plug things into motherboard with a sleek cover. Cable management was an absolute breeze with many straps included. I would highly recommend. I am missing a part however if it was supposed to come with a power cord extension for horizontal display, but I am unsure. I am reaching out to support now to find out how good their support system is. But I don't think I'd ever want it horizontal anyways.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Joleen B
Comentado en los Estados Unidos el 15 de abril de 2025
Love this case. It was a breeze to build in. My last case we actually had to loosen the front face fan to fit my GPU (it was a mid tower ATX case), but with this case and hanging the GPU (RTX 3070 TI) downward there is so much space left over. Everything just fits. I do sit my case on the floor under my desk, which make the ports on the feet difficult to reach. Maybe one day I'll have space on the desk and they will be perfect to use. The lights are not too bright, at least not on the floor but that could also be color choice. Very sturdy, but a little too large to carry around. I used to transport my last case back and forth between my house and my boyfriends. Had to give that up with this case. It is a little too heavy (for me) and larger, it did not fit my carrying strap. It hides all my wires well, (power, USB, Internet etc.) but that also makes it a bit of pain to unplug, another reason to not transport it back and forth. If you leave it set and not need to constantly unplug it, it will be great.
J. Lamba
Comentado en los Estados Unidos el 19 de abril de 2025
One of the best pc cases I have ever owned and built a system in. I have been looking for a case that I could put sideways flush against the right corner of my office. I was using my old PC011 that way, but the mess of rear IO wires was always visible. This case allowed me to have my build in the orientation that I desired without having any rear IO cables being visible (see pics). There is plenty of room for cable management, plus having the cover in front of the mobo 24 pin connector allowed me not use an 24 pin extensions for my build. The fans that came with the case seem to be of high quality. I ended up moving them to the top as exhaust and used my existing lian li fans in the bottom and side. Overall, this is hands down my fav pc case at the moment.Overall it’s a really great case with the following pros/consPros:- Really great build quality (similar to lian li PC011)- Impressive fan capacity. I have 9 fans in my build.- Fan brackets make installing the bottom and side fans or radiator really easy.- lots of cutouts for sneaking wires and hiding them- impressive amount of room for cable management.- Decent front IO options- great for those who want multiple orientation options or have unique build needs.- built in RGB controller can be used either with your mobo or without.- easy to access dust filters on the bottom and sideCons:- Not really a con, but the PSU area might be tight for those using cable extensions or a larger PSU. I’m using a 150mm long EVGA 850w PSU and there is plenty of room, but some people might have issues. Making this area larger would make the case bigger so not really a con.- if you run 3 fans on the top, you might not be able to access some ports on your GPU. I’m using a single monitor so not an issue for me.- Opening for accessing the screws for the expansion slots is small and you cannot use a multi bit screw driver. Again, not a dealbreaker just required me grabbing a different screwdriver.If you go with this case, just make sure you plan it a little as you might need some USB extension cables or longer video cables based on your selected orientation and placement.
Kristen_Coffelt
Comentado en los Estados Unidos el 30 de junio de 2024
Pros: 30 seconds to set up and take down. Mattress is comfortable. We have a belly sleeper 8 month old so the mesh sides have me peace of mind when she rolled her face into the side. Carrying case is easy to travel with and big enough to get it re-packed easily. Sturdy- our baby stood up and pulled on the edges it still held up really well.Cons: mattress isn't breathable. Our girl is 8 months so I know she can turn her head but for a younger baby I might worry if they sleep face down.We used this with the portable hatch machine. I love how small it is because it's easy to travel with and fits in a small hotel bathroom. We put her in the bathroom to sleep because there's no windows so it's blacked out, with our monitor on the bathroom counter. Worked great, we usually use the newton mattress at home. She slept from 8pm-6am with one minor wake up at 3am. Just like at home!
Ana Silberstein
Comentado en México el 14 de julio de 2023
Muy practica y excelente calidad
Anna
Comentado en México el 22 de junio de 2023
Esta increíble y súper práctico lo recomiendo ampliamente
Rita bonita
Comentado en México el 23 de noviembre de 2022
Tiene un colchón muy cómodo, de buen tamaño, se dobla fácil y muy comodo
EC
Comentado en los Estados Unidos el 31 de julio de 2021
It takes longer than one second to pop up and fold, but it’s straightforward and pretty quick. It’s easier to move it room to room. It’s much lighter than a pack and play and therefore easier to carry around. The mattress is also much softer than most pack and play mattresses, but I’m not worried about my baby suffocating. I would definitely buy again.
Lorena Fernanda
Comentado en México el 7 de julio de 2020
Tengo varios años que la sigo utilizando muy seguido con mis hijos y es muy practica y cómoda para ellos.
MS
Comentado en México el 10 de julio de 2020
Es la mejor cuna viajera. Práctica, fácil de armar y desarmar, ligera, cómoda (tiene colchón) y compacta.
Maite
Comentado en México el 24 de febrero de 2019
Práctico y bonito diseño aunque me hubiera gustado q fuera un poco más grande
mckv
Comentado en México el 9 de septiembre de 2018
Me encanto este producto. Es muy liviana pero a la vez muy firme. Puedes meterla al fondo de una maleta de las de rueditas grande, lo cual me parecio excelente.
Lulu Lu
Comentado en los Estados Unidos el 21 de julio de 2017
I bought this when my baby was around 6 months old. Intended to use for domestic trips.This summer we took it with us for a vacation abroad, and I finally realized how great this travel crib is!It is very easy to install and uninstall. Very sturdy, we checked it in as regular luggage, and there was no problem at all.
Gabby Mntcn
Comentado en México el 27 de marzo de 2017
Super ligero, practico de abrir, de cerrar y de instalar. Sin duda creo que es la mejor cama portatil del mercado.
Maasie
Comentado en los Estados Unidos el 25 de noviembre de 2017
Its’ light weight, easy to set up and convenient. We bought this for our 17 month old granddaughter to sleep in when they visit. I ordered pink and it is not pink. More of a dusty rose to light purple. It came with no instructions to set up or take down. Stetting up was easy but getting it to fold in half was an issue. I finally found a YouTube video that showed how it was done. You would think for over $200 there would at least be instructions on use. I’m still trying to figure out what the clips on the bottom are for.
LeRub
Comentado en los Estados Unidos el 12 de agosto de 2016
I have wanted this product for a couple of years, but never thought I could justify the cost. We have a pretty long road trip coming up, and I am quite sick of lugging the heavy pack and play around. I am in love with this travel crib. I would even use it as a regular crib if I didn't already have one.It is very light, about 12 pounds. Sets up in about 30 seconds, without having to read the instructions. I got the pink color, mostly because it was on sale, but it is a very nice dark pink/light purple color.I put my two-year-old inside, and she loved it immediately. She's in the 90th percentile for height, and she still had a lot of room. She got very comfy and took a nap. I originally bought a snooze shade to put overtop during naps to make it darker, but I received the wrong one. I then decided to try and put a sheet over top, and it seems to work very well. Are used a crib sheet, but a pack and play sheet works a little bit better. And is much cheaper! As you will see from the pictures, my toddler was pulling on it and it was very sturdy. She cannot climb in and out, because there is nothing hard on the sides.I then put my six-month-old inside. She played for a good 20 minutes, which never happens. Already a good sign! What I like most for infants, is that it's Jim enough so that she won't be distracted during naps, but I can still see her through the mesh for safety. Also because of the mesh size they have a little bit of give so when she falls over from sitting position, her head just goes on to the mash and no harsh corners like in the pack and play or crib.The only minimal complaint I have, is shown in one of the photos. As soon as I opened it up, before my daughter even touched it, I noticed a couple threads were loose, and the side was fraying. Doesn't look like I got a used product, so maybe just a glitch in manufacturing. But for the amount of money that this costs, I feel like every product should be in perfect condition.I highly recommend this to anyone looking for a portable or nursery crib. The functionality is unsurpassed, it looks great, it is so light weight!
Productos recomendados
Mex $2,439.00
Mex $ 1,097 .00 Mex $1,097.00
Mex $199.96
Mex $ 109 .00 Mex $109.00
Mex $4,432.95
Mex $ 1,861 .00 Mex $1,861.00
Mex $705.00
Mex $ 366 .00 Mex $366.00
Mex $3,736.80
Mex $ 1,718 .00 Mex $1,718.00
Mex $374.00
Mex $ 205 .00 Mex $205.00