No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Cafetería
computadora de oficina
Exhibición de tarjetas
Jonathan
Comentado en Canadá el 30 de marzo de 2025
This product doesn't come with instructions, you have to look at the images in the product description to figure it out. I wish they had printed them out or at least mentioned that's where the instructions were. And the instructions do not mention that you need to be careful to not tighten the screws too tightly to the acrylic or it will crack all around the screws. (as you can see in the photo)
Transparency is Key
Comentado en Canadá el 12 de febrero de 2025
This is a nice card display.It is easy to assemble, and the bamboo is good quality.It's the perfect size to display on a tabletop.
Zephyr
Comentado en Canadá el 4 de enero de 2025
Review for: "Greeting Card Display Stand 4 Tier Bamboo and Acrylic Greeting Card Organizer Holder, Postcard Display Stand for Cards Postcards Brochure Photos Picture (1Pack)"Brand: RWWPJLLWHRFirst look: The Greeting Card Display Stand came in pieces bubble-wrapped in a plain brown box (35.5 cm x 30 cm x 6 cm). There were 6 bamboo wood pieces and 5 acrylic pieces, plus a screwdriver & screws to put it together, but no instructions.Assembly: I was overwhelmed with all the pieces and no instructions. I looked at the online listing and found a picture that shows how to put it together, but the steps are incorrect and don't tell you which screws to use where. Here's what I figured out (after getting help):There are 10 small screws that go from each acrylic piece into each small wood shelf. The 8 long screws go from the wood sides to the wood shelves. There are 3 extra screws of each in case you lose any.The first step is to take the plastic film off each acrylic piece (as you go) then attach each of the 3 larger pieces of acrylic to each of the shelves, then the medium size piece to the 4th shelf. Make sure one of the larger pieces goes on the wood shelf that has drill holes in each side. Then the smallest acrylic piece goes onto the opposite side of that wood piece.The next step is to slide each wood piece and acrylic shelf into one of the large wood side pieces and attach them using the larger screws. The wood shelf with acrylic on both sides is the bottom piece, and the one with the medium sized acrylic is the top piece. Once they are all screwed into the one side, you can line up the other side and attach it with more long screws. This step was too difficult & frustrating for me so I had someone else do it.It took about 30 minutes to put it together plus a lot of frustration time, so an hour total, plus help from someone else.Once built, the stand is about 34 cm wide x 23 cm deep x 31 cm high. Each display shelf is about 32 cm wide x 4.5 cm deep.Opinion: I ordered this greeting card display stand to show off my calendars, and 3 of the 4 shelves work well for them. The last shelf could be used if the acrylic was the same size as the other ones and the wood came up just a bit higher, but all 4 shelves should work for greeting cards.I was not impressed with the lack of proper instructions and had to rely on a friend to figure out what went where. Once built though, it seems fairly sturdy and looks nice with my calendars.
Productos recomendados
Mex $272.60
Mex $ 160 .00 Mex $160.00
Mex $509.91
Mex $ 229 .00 Mex $229.00
Mex $296.49
Mex $ 145 .00 Mex $145.00