Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Sleep On - Funda para colchón de látex (7,6 cm, tamaño Queen solamente)

Envío gratis en pedidos superiores a Mex $600.00

Mex $3,090.38

Mex $ 1,421 .00 Mex $1,421.00

En stock

Acerca de este artículo

  • Nota: este anuncio es solo para la funda de colchón (no incluye espuma)
  • Diseñado para dormir sobre colchones de látex
  • Tejido superior (80% algodón orgánico, 20% poliéster)
  • Parte inferior de sarga (100% algodón orgánico)
  • Pieza superior: lavar a máquina en frío, parte inferior: solo limpiar en seco


Estas fundas están cosidas con orgullo en nuestra fábrica de Chicago. La cubierta cubre completamente el topper, añadiendo una capa adicional de protección. La parte superior de tejido de algodón proporciona una sensación suave y lujosa.
La funda está hecha con dos piezas de tela separadas. La parte superior cubre la parte superior y los laterales y está fabricada con tejido de punto (80% algodón orgánico, 20% poliéster). La parte inferior está hecha con un resistente tejido de sarga de algodón 100% orgánico. Estas dos piezas se cierran alrededor del borde inferior de la funda. La pieza superior se puede lavar a máquina en agua fría, pero la parte inferior se limpia en seco.
Ten en cuenta que este anuncio es solo para la funda de colchón. Es solo una funda de tela y no contiene espuma o colchón. Estas fundas pueden funcionar con otros colchones pero están hechas específicamente para colchones Sleep On Latex


Customer
Comentado en los Estados Unidos el 21 de enero de 2024
This is a high quality mattress topper with a nice soft and bouncy feel. Unfortunately, it didn't work for me as it was too soft and caused lower back pain. The return process is also a pain because it doesn't fit back in the box they sent it in, but if you call SOL directly, they will likely send you a return box. SOL customer service is excellent. If you have any lower back concerns, I would recommend the medium topper and perhaps in 2 inches, depending on your body type. Still giving 4 stars for quality.
Customer
Comentado en los Estados Unidos el 16 de enero de 2024
It's a thick, yet breathable cover that definitely softens the topper. I had been using a thin, extra deep fitted sheet and enjoyed the topper, but felt it was a bit too thin and a bit to firm. This keeps the topper in place fairly well, but could be better. Unzipping it entirely to remove the top half for easier washing and rezipping is great since getting the bottom half on solo can be a bit of a task.
Juj
Comentado en los Estados Unidos el 6 de septiembre de 2024
This cover is 100% cotton. Not only is it breathable & cool-sleeping, but ultra-soft, stretchy, plush, and surprisingly easy to put on.It is genuinely the best (even compared to those from other latex mattress companies) if you’re looking to contain your topper, make it easier to move, protect it from ripping, and prevent it from collecting dust/fur/bits — without sacrificing the elasticity, plushness, or breathability of your latex bedding.We recently got a Saatva Classic Soft mattress that’s too firm. To remedy this, we first got a 2” Soft topper from Sleep on Latex, followed by a 3” Soft Talalay topper from latex mattress factory, soon to be topped off by a 1.4” Soft Turmerry egg crate topper. (We may not need the mattress at all…)I have interacted with customer service from each company. Sleep on Latex has been by far the most responsive, patient, kind, and helpful with my barrage of questions.I would have gotten the other toppers from Sleep on Latex, or may not have needed them at all if SoL offered an extra-soft (~10-14 ILD) option for small side sleepers who require a particularly cushy surface like we do, but the 2” soft makes for a fantastic base layer in our “latex cake” as it is (no small thing!).I got this 3” cover after realizing how much we love our latex bedding and therefore hope to preserve it for as long as possible. I thought 3” was the deepest offered (which is true on Amazon) and put it on our top Talalay layer only, but really wanted to have both toppers contained, so I reached out on their site to ask about larger sizes.Lo and behold, Sleep on Latex offers topper covers in every inch from 1”-12”. I was absolutely thrilled and ordered a 5” — before knowing we’d be getting the egg crate topper, so I will be ordering the 7” and returning the 3” & 5” covers.I may get a second cover to add an extra layer of (washable, absorbent) protection in the unlikely-yet-potentially-catastrophic event of a spill, as these are not meant to protect the latex from liquid as-is. I cannot stand sleeping on TPU mattress protectors, as the plastic messes with the feel of the latex and takes away from its breathability — but if you need the security of waterproof material, put it on under this cover and you’ll barely feel it.In case we ever have issues with it sliding on our mattress, I confirmed with the company that the cover should be strong enough to handle fitted sheet straps(!!), but so far, there’s been no movement, even with our adjustable bed base.I really cannot recommend this company or their toppers & covers enough :)
Nichole
Comentado en Canadá el 19 de diciembre de 2023
Good quality, easy to put on, would buy again.
Michael R Caditz
Comentado en los Estados Unidos el 1 de marzo de 2020
I just today received this topper cover and placed my 3 inch Sleep On queen topper inside it.It is a perfect fit and so far seems to be a top-quality product. It provides protection for the topper, which being latex, appears to be subject to damage if not protected.The trick I used to get the topper properly aligned inside the cover was to first completely separate the cover top from the cover bottom bottom by unzipping. I then laid out the cover top flat on the bed, then carefully placed the latex topper into the cover top. I patiently aligned the topper on the cover top. So at this point the cover and topper cover were upside down, with the topper aligned inside the cover top and the topper tucked into the corners of the cover top.I then laid the cover bottom on top of the assembly, and carefully zipped the zipper all the way around, protecting the latex with my fingers so it would not get caught up in the zipper and damaged.Finally, I carefully flipped the assembly over by gently folding it in half (the long ways) and working the lower fold out from under.Without this cover you would have a slab of raw latex which might be difficult to manipulate and would likely get torn or lose chunks around the edges when changing sheets, etc.
Productos recomendados

Mex $496.56

Mex $ 228 .00 Mex $228.00

4.3
Elegir