Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

SGTKJSJS - Tornillos de montaje para ventilador de refrigeración para computadora, tornillos largos y cortos, tornillos de montaje para ventilador de PC, kit de tornillos largos y cortos (#6-32 x 30

Envío gratis en pedidos superiores a Mex $600.00

Mex $216.61

Mex $ 129 .00 Mex $129.00

En stock

1.Color:2 Pzas


Acerca de este artículo

  • Perfecto para instalación fija de ventilador de carcasa de computadora.
  • Tamaño de los tornillos de ventilador de la caja de computadora: M5 x 10 mm, se adapta a la mayoría de ventiladores de carcasa de computadora, el tornillo largo de refrigeración de agua: 6 a 32 x 30 cm de largo.
  • Diseño de rosca autorroscante para una instalación rápida y fácil de la mayoría de los ventiladores estándar con marco de plástico.
  • El paquete incluye: 20 tornillos de ventilador de radiador de carcasa de computadora #6-32 x 30 mm, 20 tornillos de montaje de ventilador de refrigeración M5 x 10 mm.
  • Los tornillos del ventilador del computadora del radiador están hechos de metal de alta calidad.


Kit de tornillos de ventilador para carcasa de computadora, tornillos de radiador, componentes de ventilador de chasis de computadora, 1. Perfecto para instalación fija de ventilador de carcasa de computadora de PC. 2. Tamaño de los tornillos de ventilador de la caja de computadora: M5 x 10 mm, se adapta a la mayoría de ventiladores de carcasa de computadora, el tornillo largo de refrigeración de agua: 6 – 32 x 30 cm de largo. Diseño de rosca autorroscante para una instalación rápida y fácil de la mayoría de ventiladores estándar con marco de plástico. 4. El paquete incluye: 20 tornillos de ventilador de radiador de carcasa de computadora #6-32 x 30 mm, 20 tornillos de montaje de ventilador de refrigeración M5 x 10 mm. 5. Los tornillos del ventilador del computadora del radiador están hechos de metal de alta calidad.


CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
CJ
Comentado en los Estados Unidos el 4 de marzo de 2025
Works as described. I had to modify my GPU radiator fan locations on my PC case by making a "GPU sandwich" having fans on both sides and I needed a long screw to make it happen. This made it possible.
Ryan Ogawa
Comentado en los Estados Unidos el 28 de marzo de 2025
All 4 tags had a slight kink on one side and all 4 were not transparent and clear. They were smeared and dirty. Like they were used before.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
Eric Harris
Comentado en los Estados Unidos el 27 de febrero de 2025
Everything I needed to add a 10th fan to my cooling needs. These are quality screws that work as designed.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
P. Clarke
Comentado en los Estados Unidos el 3 de enero de 2025
There's not much to say about a screw, the most important part is that it threads in where it should and the long #6-32 screws do that for me. I haven't used the short 5mm fan screws yet but I don't expect any issues with them as they cut their own threads into the plastic case fans.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
robk64
Comentado en los Estados Unidos el 29 de enero de 2025
The longer screws which would secure a fan to a radiator are not that good. They're too narrow, to the point that there's wobble when screwing into the rad without a fan (to see how snug the threading is). They will hold a fan to the radiator, but if you over tighten even slightly, you'll either strip the threads on the screw, or on the radiator. Very cheap screws.
Fox Machado
Comentado en los Estados Unidos el 1 de abril de 2025
At first I thought it didn’t work with my phone case because it was blocking my charger from fitting. It ended up just needing to be shimmied a little and if I pull down on the tab there’s easily enough room to fit my charging wire. I lose my phone in my blankets constantly so I used this to attach a fuzzy keychain to my phone and it’s helped a ton. Definitely recommend, seems strong and it’s a good design.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Guadalupe mendoza
Comentado en los Estados Unidos el 6 de julio de 2024
The 10mm is much thicker in person than in the pictures. It doesnt fit in my cooler.
Debra L. Copeland
Comentado en los Estados Unidos el 7 de diciembre de 2024
This works great to attach a wrist strap to my phone.
Ride to the Music
Comentado en los Estados Unidos el 8 de noviembre de 2024
As opposed to all the other gadgets like these, this one does not fray and thus has to be replaced regularly.
Kimberley W
Comentado en los Estados Unidos el 28 de septiembre de 2024
These are simple and easy to use.I'm trying to keep my charging port clean and dust-free with a port plug, but they are so tiny that they are hard to keep track of. My dust plug has a tiny hole to which I attached a little split ring and a little string lanyard that I attach to the D-ring on this lanyard patch. It works absolutely perfectly. I can remove the port dust cover for charging, but it's still attached to my phone with this lanyard patch.I can't really say how durable it will be because my tiny plastic plug weighs nothing. However, it doesn't feel as though it's made cheaply. I have a clear thin case on my phone and have no problem with the patch fitting; it's nice and thin, and I really like that it's clear so the only part you see is the gold-colored ring, which matches my phone nicely.I ordered the pack of four, which was a better price per count.Overall, I think it's a well-made product.
Productos recomendados

Mex $203.97

Mex $ 114 .00 Mex $114.00

4.3
Elegir

Mex $73.00

Mex $ 37 .00 Mex $37.00

4.4
Elegir