No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Conectores de pala de 45 grados
Los conectores de pala son una alternativa versátil a los enchufes de plátano o engarces de alambre al configurar un sistema modular de entretenimiento en el hogar. Fácil de terminar y con una conexión fuerte y clara, estos conectores de pala hacen que cualquier instalación de audio sea muy fácil.
Fácil configuración
Terminar el cable un poco más de 1/2 pulgadas. Desenroscar la carcasa exterior del conector de pala de cerrojo
Alimenta el cable del altavoz a través del orificio central de la carcasa del conector
Doble las hebras del cable del altavoz alrededor de los dientes del conector.
Reemplaza la tapa de nuevo para asegurar el conector de pala al cable del altavoz.
Materiales de primera calidad
Las puntas conductoras de los conectores Spade están hechas de latón chapado en oro de 24 k para proporcionar una conexión confiable.
B.B.
Comentado en los Estados Unidos el 29 de junio de 2021
I am using these for a pair of speaker binding posts that are enclosed behind a panel that is screwed into the back of my particular speaker. Because of the nature of my particular speakers, I wanted to be use a spade plug so that there would be no way they could come loose if I moved my speaker - I didn't want to remove my rear panel and look every time the speaker was moved. I am confident these will not come loose ever.They are gold plated, two-piece units. The top unscrews and I was able to make a VERY strong connection using my high quality 12 gauge speaker wire. I feel I could not have made a better connection.The only warning would be that they are LARGE and if you are using an older amplifier or a cheaper consumer grade unit, the posts for speaker connection might be too tight / or small to facilitate such a large spade. There are other sizes; these ones are some big boys. I love them so far, my connections are fanastic and the sound (to me) is MUCH cleaner than my banana plugs I was using previous. 10 of 10 would recommend.
Steven Yadernuk
Comentado en Canadá el 4 de febrero de 2021
Was very impressed with these spades. Very heavy, solid and of good construction. Made speaker cables with 12awg 4 conductor so they're able to take 9awg or even 8 awg. Quick and easy to install with a very sturdy connection. Would purchase again foresure!
Marie
Comentado en los Estados Unidos el 9 de octubre de 2019
My audio speakers allow 2 options for connecting speaker wire - either wire-wrap or use spade connectors. I decided to go with spade connectors since that provides a cleaner and stronger connection. I looked at several different product options including AudioQuest which many consider the best when it comes to connectors.I decided to give the Swell spade connectors a try since they appeared well made based on my research and significantly easier on my budget. I wasn’t disappointed by my decision. These connectors are very well made and heavy duty, but they are large (see photo) and will not work for all applications due to the space requirements. For example they were too large for my receiver (not enough clearance to accommodate their size), but with a little finesse ended up working well with the binding posts on my speakers (see photo).These connectors will work well with 10, 12, 14, 16 and 18 gauge speaker wire using the self crimping teeth which securely fastens the speaker wire to the connector.Connecting your speaker wire to these plugs is pretty straight forward and takes 5 steps:1- Unscrew and remove the bottom cap of the spade connector.2- Strip approximately 13-14 mm (~1/2 inch) of the insulation jacket from the end of the speaker wire exposing the bare copper conductor.3- Feed the bare wire through the bottom hole of the bottom cap until they protrude beyond the teeth of the bottom cap.4- Bend the copper strands of the speaker wire down around the teeth of the bottom cap.5- Screw the top of the connector (the gold plated spade portion) back onto the bottom cap securely.
phylasnier
Comentado en el Reino Unido el 17 de septiembre de 2017
Amazingly simple to install, and make a very secure connection. The connectors are quite chunky and give a clear impression of solidity. They fit perfectly on the post connectors of speakers (the ones in which you can usually insert a 4 mm banana jack or bare wire). Beware to use reasonably chunky multi-strand wire (I used 2.50 mm2 one, approx 13 AWG) as otherwise the wire might be quite loose inside and could break off if twisted around.
Cliente
Comentado en España el 4 de septiembre de 2016
Como he podido tener toda mi vida la conexión con los altavoces sin este adaptador?Sujeción fantástica. Rosca de alta calidad. Precio muy competitivo.Sin problemas con el envío. El packaging se reduce a una bolsa protectora (suficiente).
Productos recomendados
Mex $244.57
Mex $ 122 .00 Mex $122.00
Mex $633.30
Mex $ 348 .00 Mex $348.00
Mex $406.15
Mex $ 207 .00 Mex $207.00
Mex $270.57
Mex $ 156 .00 Mex $156.00