Cliente de
Comentado en México el 6 de agosto de 2024
Conecte 5 pedales y se apagó, su material es algo chafa y si te sirve muy bien si metes solo 4 pedales de 9V
cesar martin rodriguez torres
Comentado en México el 3 de diciembre de 2024
Pense que incluia el cargador pero no tube que comprarlo por separado pero funciona muy bien.
Amadeus
Comentado en México el 11 de octubre de 2024
Me llegó dos dias antes pero el pedal ni siquiera encendió, probé con 3 fuentes de alimentación diferentes y ninguna funcionó, ya entregué el producto a dhl.
Richard G. Amirault
Comentado en los Estados Unidos el 7 de septiembre de 2024
I needed a power supply for an old Radio Shack shortwave radio. The RS power supply is no longer available. I did a search with the RS pwr supply stock number here on Amazon and found something proported to be an exact replacement. Yes the voltage, size and polarity of the connector matched .. so I bought it. It "worked" but added noise to the radio. I returned it.An additional search here found this. It's designed to power certain audio equipment. I hoped it would be "clean" power .. and it is. A well designed AC power supply. Very happy with this purchase.
Daniel
Comentado en México el 16 de abril de 2024
Pedal, muy útil si lo que buscas es ahorrar. Espacio, sonidos muy limpios, aunque el detalle de el Looper no me convence del todo. Muy práctico para ensayar, nada recomendable para usar en vivo, eso solamente aplica al efecto del Looper, por lo demás, una excelente compra.
Jose Maria Hernandez
Comentado en México el 25 de julio de 2023
Lo compramos por el precio ,pero funciona muy bien , ecualiza mi guitarra muy bien , muy bueno y buen precio …
César
Comentado en México el 31 de diciembre de 2023
Cumple con su objetivo, es muy compacto y fácil de transportar, trae memoria, pero no trae eliminador para conectarlo a la luz eléctrica, eso no me gustó, pero en general buen producto, para poder improvisar solos de guitarra o armonía de voces, o armar maquetas para canciones
Mauricio Daza
Comentado en México el 4 de noviembre de 2023
Excelente pedal para ecualizacion en bajo. Económico pero con buen sonido.
Evelyn
Comentado en México el 27 de enero de 2022
Para El tamaño funciona bastante bien e incluye todo lo necesario para empezar a usar tus pedales, eliminador o cargador y 8 "Daisy chain" para alimentar los pedales, lo cale con un vox wah 845, una distorsión y un noise gate , y funciona bastante bien , no tengo suficientes pedales para probar con 8 pero estoy satisfecho con la compra
Jarn K
Comentado en el Reino Unido el 26 de agosto de 2018
This is a good little pedal. Bought it as I wanted to see what all the fuss is about with the boss slow gear but didn't want to pay £300 on eBay. This is a nice effect for getting swells and smoothing out the attack. Used with a harmoniser pedal in the right way you can get some really nice ambient sounds out of it. I wouldn't pay for a boss one when this works so well at such a good price. Only gripe is the switch could be a bit quieter but I've encountered worse.
J. Turner
Comentado en los Estados Unidos el 12 de marzo de 2018
UPDATE: now 2 stars (was 5 stars). big problem -- the pedal bleeds through some signal in A/B mode!Update: While playing at fairly high volumes today I discovered a problem. A small amount of signal bleeds through from the "A" channel to the "B" (and vice-versa)! I don't understand how this can happen with a "true bypass" switch. I will open up the pedal tomorrow and see if I can figure out what's going on. If I need to I'll gut it, remove the "Y" slide switch (which I suspect is the source of the problem) and wire it back up myself as a pure A/B switch.I discovered this problem today while trying to figure out why my Fuzzface has been sounding so poor recently. (coinciding with the addition of this pedal, I now understand) When I put the Fender on standby and hit a chord my Marshall played a small amount of the signal, like a faint echo, even though that channel was "off'! This should never happen, there should be ZERO sound going to that amp! However, this explains why my fuzz pedal is acting up -- it's extremely sensitive to electrical resistance in the circuit "upstream", including the guitar cable and pickups, so if the other amp was in circuit, the fuzz would "see" this additional load and act differently. Basically there was much more load on the fuzz circuit so it responded.Diagnosis: I removed all the effects and had only guitar -> ABY -> amp1 / amp2 -- the problem was still there. When I removed the AB/Y switch and plugged directly into the effects chain, everything worked again! So it's definitely the pedal failing to fully switch channels or backfeeding through the slider switch. I'll put an ohmmeter on it tomorrow just to see.You probably won't notice this at "bedroom" practice volumes. But if you ever play loud (rehearsal/performance) or if you use a fuzz pedal, you may experience the problem.For reference, here's my effects chain:Guitar -> Wah -> pitchblack tuner -> ABY switchchannel A (lead) : fuzzface -> EP103 -> fulltone fulldrive -> Marshall ampchannel B (clean) : belle epoch -> tc stereo chorus -> Fender ampVery disappointing. I bought this pedal because it was better looking and much smaller than the one I built from the plans Mike Fuller (Fulltone) posted online about 15 years ago. I guess I'll put my old silver pedal back on the board until I can get this one sorted out.OLD REVIEW IS BELOW:----------------TITLE:Recommended. Sturdy feel, looks good & works fine.Sturdy little pedal, switches between my amps just fine: the switch feels solid, and the metal case should hold up to a lot of use.As the other reviewed said, to change between A/B mode and Y mode, you have to flip the slider switch on the face of the pedal.Seems to be the same as mooer, tomsline, etc. but this one costs 10% to 45% less. So read those reviews, too.
Guy C.
Comentado en Canadá el 7 de noviembre de 2018
Too many options in one pedal. Sounds not bad but has a slite buzz when plugged into a multiple power unit
gi
Comentado en Alemania el 3 de septiembre de 2018
Das Pedal arbeitet digital mit leider deutlich spürbarer Latenz. Es kommt regelmäßig zu "falschem" Triggern, das Pedal reagiert somit weitestgehend unberechenbar. Dazu wird jeder Anschwellvorgang von einem Klicken begleitet. Sehr ungewöhnlich für Rowin: Das Pedal ist m. E. völlig unbrauchbar.