No hay artículos en el carro
No hay artículos en el carro
Especificaciones:
- Modelo: 609-2RS
- Tipo de sello: Doble sellado.
- Material de carrera interior/carrera exterior: acero chapado en cromo (GCr15)
- Material de la jaula: acero estampado.
- Diámetro interior (d): 9 mm.
- Diámetro exterior (D): 24 mm.
- Grosor (B): 7 mm.
- Clase de precisión: P0 (ABEC-1)
- Nivel de ruido: Z2.
- Número de paquete: 20
Características:
- Una sola fila, prelubricada, precisión normal.
- Los rodamientos de bolas de ranura profunda son uno de los rodamientos más utilizados. Se utilizan para acomodar cargas radiales y axiales en ambas direcciones.
- Con una pequeña fricción y velocidad de alto límite, los rodamientos de bolas son rentables y requieren poco mantenimiento.
- Estos rodamientos rentables se utilizan ampliamente en áreas con bajos requisitos de dureza Mohs.
- Adecuado para todo tipo de equipos industriales, micromotores, pequeños motores rotativos, equipos de oficina, etc.
Guía de selección:
- Escudos (sufijo de designación Z/ZZ) - Alta velocidad. Protege de la suciedad y los residuos.
- Sellado (sufijo de designación RS/2RS) – Hecho de hule de nitrilo butadieno reforzado en chapa de acero (resistente al aceite y a los líquidos). Velocidad límite inferior que los rodamientos de escudo.
Greg Mac Pherson
Comentado en Canadá el 27 de agosto de 2024
Yes
AndyAMS
Comentado en el Reino Unido el 26 de junio de 2024
These new bearings are sealed to keep out water and liquids and have given a repaired toy a new lease of life.I had to repair an expensive broken adult toy which had seized and rusty bearings rendering it useless.These new bearings replaced the old bearings with zero hassle.These were such good value for money I bought way more than I needed. I now have plenty of spares...
charity services
Comentado en los Estados Unidos el 19 de noviembre de 2024
There are several 4 LPM (about 1 gallon) pumps on amazon that cost about $20, and can lift water over 100ft. There is usually an added heavy bearing on the output shaft, to compensate for the offset that drives the pumping action (so the bearing in the output of the motor does not prematurely wear). However, there is never a bearing installed on the rear. Fortunately, there is a little bit of shaft extending out, so when your bearing wears-out, simply press one of these on the end, then secure with a hose-clamp. It re-centers the axle so the pump works again.
Mark Weinberg
Comentado en los Estados Unidos el 23 de diciembre de 2023
I got these for an RC car application and so far They seem to be working fine. I'm sure they won't last as long as a name brand bearing but they're also 10% of the price. As long as it's not a mission critical application I don't see any reason why these won't work.
Jeff
Comentado en Canadá el 27 de octubre de 2023
I tested out another set of these bearings with a slightly different dimension, which was for situations where I needed a slightly heavier duty/larger diameter unit. These bearings are just as high quality as the others I tested out. Bearings are very smooth, the manufacturing dimensions are extremely accurate, and the seals are high quality. I expect them to last for quite a long time in use. These will likely be first used in a custom wood cutting cnc build. I will also use them in FDM printing builds.They are actually nicer than I was expecting, considering the number that you get and the overall cost. Worth the investment.
Productos recomendados
Mex $501.74
Mex $ 235 .00 Mex $235.00
Mex $471.05
Mex $ 221 .00 Mex $221.00
Mex $188.00
Mex $ 112 .00 Mex $112.00
Mex $375.99
Mex $ 169 .00 Mex $169.00