Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Rockwell Soporte de trabajo RK9034 JawStand XP

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,842.50

Mex $ 1,222 .00 Mex $1,222.00

En stock

1.Nombredelestilo:5mm|diá:10mm-1 Pieza


  • [Pomo de ajuste de altura micro] te permite colocar el proyecto con precisión donde necesita estar para que puedas fijarlo a la pared
  • Superficies de agarre de goma: mantiene el proyecto en su lugar de forma segura sin marcar o dañar el material
  • Base de trípode: con pies antideslizantes y sin manchas que se mantendrán en su lugar en suelos irregulares, incluso bajo una carga pesada
  • Superficie de baja fricción: cuando estés listo para liberar el proyecto, simplemente desabrocha y se deslizará suavemente
  • Abrazaderas de cabeza giratorias e inclinables: va de 0 a 90 ° para que puedas colocar el proyecto en la orientación exacta que te guste mientras trabajas en él;Nivel de burbujas: integrado para una fácil nivelación, por lo que cuando estés instalando una estantería colgante sabrás cuándo está bien



Más información del producto

Rockwell JawStand XP; capacidad de carga de 220 lb

Cabezal de sujeción pivotante de 0 a 90 grados.

Manivela suave hace micro ajustes en altura.

Contacto base de 3 puntos para una mayor estabilidad.

Proporciona soporte esencial en un entorno de taller.

Mantiene los materiales constantes mientras se sujeta en su lugar.

Indicador de burbuja para nivelación

Rockwell; Cero dejar

S. Aschoff
Comentado en los Estados Unidos el 23 de febrero de 2025
I feel like the demonstration pictures are a little misleading. Without mounting this thing to something, it is very wobbly. And clamping is very misrepresented, in my opinion. I mean it struggled holding a little piece of mdf. Maybe mdf is just too slippery. It definitely held a piece of 2x4 better. I guess I just thought this thing would be more flexible and useful. It actually has limited use cases. It's clamping area will definitely hold a door like they show, but it won't hold anything less than 3/4" without improvisation. It was probably mentioned in the description so shame on me if it was. Seems like, to make this thing really useful, you need two of them. I am not thinking it is priced incorrectly, I mean it is sturdy and clearly built with quality, but the clamping mechanism is just limited and only has 3 litlle pads. And the pads are hard plastic and not that grippy nor soft - could definitely see how it might mar your wood. Anyway, this thing has limited uses, but I am still going to keep it as with little tweaks, I can see still finding a way to making it more helpful. I am going to save up for the jawhorse. That looks to be way more useful and folds up to be just about as small as the jaw stand. I will do that instead of getting a second jaw stand. I'm sure others will find a better way to use this, or maybe have something to bolt it to. I just thought it would be more versatile for the tiny projects I'm working on and it just didn't meet muster for me.Update:The problem with my perceived value was my point of view. While I bought this with a pre-conceived notion of how I might use it in woodworking and not thinking of real use cases this was intended for, I now see this little stand has many uses. May require a little creativity, I've already thought of things where this stand will be incredibly useful to me in my small shop!
Guillem Reig Rico
Comentado en España el 15 de mayo de 2024
Complemento de soporte, permite efectuar trabajos en los que sin él, se necesitaban dos personas. Por su diseño, acabado y utilidad, tiene un precio adecuado. Muy recomendable.
Guadalupe M. A.
Comentado en México el 24 de mayo de 2023
Este artículo es muy útil, más si trabajas solo
Almonte
Comentado en México el 3 de enero de 2022
El soporte es muy útil, para tareas profesionales funciona bien, en un uso medio, no muy pesado.
Sergio Tlanezi
Comentado en México el 27 de diciembre de 2021
buena calidad de materiales, buen producto para tu carpintería, muy util para colocar puertas, pero tambien se puede utilizar como soporte para sostenel madera y postes en su sitio.
lucas spalla
Comentado en Canadá el 3 de marzo de 2020
Edit 1: one thing that i would do it to improve the Product is to use more metal parts instead of hard plastic parts, nothing broke yet but i personally dont like to have plastic adjusters, it feels like it will break if you apply a bit more pressure hahaJUST BUY ITAt first I thought it was a lot of money (specially bc I bought 2), I wish it was a bit cheaper but oh well, it’s still an awesome product thoIf you are a handyman just get itIt’s extremely handyI use for painting specially bc you can adjust the height and work EXTREMELY CONFORTABLE, but I already hang doors with it, used for cutting extremely long boards in the end of my mitre saw etcand I also use for hanging stuff so I don’t have tools thrown around my work area and I don’t need to bend down to pick it up as well
ARMYN-DJ
Comentado en México el 23 de diciembre de 2019
Excelente para cualquier trabajo en el hogar o taller, muy útil por donde le busques, sin duda no puede faltar en un taller de carpinteria o si hacer arreglo en en el hogar. La estructura es muy sólida, fuerte y resistente, está bien construido para tener solides y agarre.
Pablo Gómez
Comentado en México el 15 de noviembre de 2019
Me sirvió a la perfección, lo utilicé para deslizar una placa de mdf en la sierra de banco. Buena calidad, ligero y práctico. La manivela de ajuste permite ajustar milimetricamente la altura para cortes precisos.
killjoy65
Comentado en México el 29 de agosto de 2018
un ayudante que te ayuda a sostener y mantener firme algo cuando lo necesitespuedes levantar u bajar con exactitud milimétrica y aparte inclinar de ser necesario.muy versatilla razón por la que no le doy 5 estrellas es que de plano no se pulieron con la prensa. no solo es de un plástico que se siente como si se fuera a romper sino que ademas el diseño es terrible ya que solo ejerce presión en la parte media y ocasiona que se pandee la pieza.pero bueno es algo que se puede arreglar.por lo demás esta excelente.
Al A.
Comentado en los Estados Unidos el 2 de junio de 2018
Wow, why didn't I own this years ago!I do a lot of remodeling here at home and just finished an upstairs bathroom from the ceiling down to a new floor and everywhere in-between.I had some large shelving to handle in my garage storage area and finally decided to get this Rockwell XP.Amazing non-slip grp for even very heavy large sheets of plywood. I put in thin sheets of luan on either side of the jaw to avoid and damage to the new shelving surface. (but, I have found that once you learn how to adjust the tension just right, this unit will grip strong without damaging your work piece.The Rockwell XP is very sturdy and solid and maintains a very stable and secure stance once set up. I used it pn our uneven paved driveway and found the legs will accommodate a little out-of-level footing and you can rotate the unit and typically find a position it will sit flat and not wobble at all.I am kicking myself for not having this when I put in a new kitchen and wall cabinets....It would have made the job so much easier.With its many adjustable positions for height and angle of the top clamp assembly, it is going to be so well suited for future jobs here!I plan to order another one as well. It has the ability to be used for a raised platform and would work well for painting above reachable heights.Given the wide stance of its legs and its rating for weight, there's probably many other uses I will come up with in time as I use ot more.5 Stars, extremely satisfied with this Rockwell!
Zeus
Comentado en México el 25 de marzo de 2018
Excelente herramienta, muy útil para diversos tipos de trabajo. Se puede improvisar como banco de trabajo, soporte para todo tipo de muebles, soporte para cuando está cortando madera en lienzos grandes. Es de muy buena calidad, resistente y fácil de transportar.
Xavier A.
Comentado en México el 24 de septiembre de 2018
Nunca me habria imaginado que este soporte iba a ser TAN util... es una maravilla, al grado que estoy pensando adquirir uno mas. El cabezal inclinable, el ajuste fino y grueso de altura, la altura que alcanza, etc. lo hacen ser MUY versatil. Solo dos detalles de que no me agradaron mucho, pero no son un "deal-breaker" son que la prensa no cierra a menos de 2.5 cm aproximadamente, asi que para sujetar firmemente una pieza de 12 o 15mm hay que colocar otra pieza de desperdicio junto a ella para que la prensa logre sujetarlas. El segundo punto es que incluye un nivel (solo en un eje) pero incluso en una superficie sin inclinacion, la burbuja nunca marca que esta nivelado asi que resulta pracitcamente inutil... puede ser que las patas tengan una imprecision minima que ocasione esa inclinacion, pero a menos que estes haciendo algo increiblemente preciso tampoco es importante.
paul turenne
Comentado en Canadá el 1 de abril de 2013
After reading reviews from various sources ,I decided to purchase the JawStand when I saw it for sale on Amazon.ca.The stand is very well built and the adjustments are very secure and useful.Due to the tripod design and footprint of the stand ,once the legs are folded out, it is very stable.The head also adjusts to a full 90° and has a gauge on the side that reads the degrees ,as well as a level bubble built into the plastic siderail covers.The clamp is also very secure ,which is achieved using a cam clamp...very nice feature !This tool has many uses around the shop and house ,limited to your imagination.PT
Productos recomendados

Mex $3,153.00

Mex $ 1,292 .00 Mex $1,292.00

4.5
Elegir

Mex $482.53

Mex $ 231 .00 Mex $231.00

4.4
Elegir

Mex $931.83

Mex $ 465 .00 Mex $465.00

4.7
Elegir

Mex $12,349.51

Mex $ 1,881 .00 Mex $1,881.00

4.8
Elegir

Mex $1,122.75

Mex $ 516 .00 Mex $516.00

4.6
Elegir

Mex $899.00

Mex $ 440 .00 Mex $440.00

4.5
Elegir

Mex $787.27

Mex $ 354 .00 Mex $354.00

4.8
Elegir