rocelco dadr Deluxe Sit/Stand computadora computadora Riser, 2 – 3 Monitor capaz de altura regulable con bandeja de teclado retráctil, Estándar 81,2 cm, Negro

I purchased this desk converter in November of 2020. I had to come back to write a review because it has really stood the test of time for me.Since buying it, I have added a second monitor along with my 27" iMac, plus a camera and a light mounted to the top deck of this thing. And it still goes up and down smoothly, stops exactly where I need it to and stays put as long as necessary. Worth every penny.Plus being able to alternate between sitting and standing throughout the course of the day has improved my productivity. The slide out keyboard tray is solid and there is a lot of real estate on the top deck for all my gear.The only drawback is that when it is fully bottomed out in sitting position, it's still relatively tall-- probably 6" or more, so it may not be ideal for everyone.

De mis mejores compras. Llega totalmente armado, con excelentes materiales y una gean calidad en los terminados.En el uso diario; super cómodo para trabajar sentado o parado, además de que el mecanismo para cambiarlo de posición es suave y fácil de usar.

El convertidor funciona de maravilla. Está un poco pesado, pero ya viene armado. Solo hay que jalar una palanca para levantarlo o bajarlo. Se puede regular la altura y hasta el momento no he tenido ningún problema. El tapete también es muy cómodo.

llegó puntual bien empacado y tal como viene en la imagen

Ya no tengo dolor de espalda y trabajo de pie todo el día.. excelente ..

I dont even have what this is for. It was just $0.06 so I couldn't resist and it's repurposable

Uno de los stand que compramos se uso para una Imac de 27"; las primeras semanas funciono bien, pero despues al momento de bajarla lo hizo bruscamente (no funcionaron los pistones), por lo que la caida hizo que se dañara el equipo.

Un gran soporte para esas largas jornadas de trabajo. Llego en menos de 4 días y todo en orden, fácil de utilizar y de gran calidad

Hasta el momento este producto muestra ser de muy buena calidad y me ha sido util para trabajar. Lo recomendaría a personas que se pasan todo el día sentadas, para mejorar su postura y circulación. A mí me ha servido mucho.

Excelente opción. No pesa mucho pero muy fuerte. Tarda un poco en llegar pero vale la pena. Buen tamaño y diseño.

My son, who owns a software design company, has Varidesks for all his employees and because I have chronic lower-back pain, he suggested I get one for myself. As a home-based writer, I sometimes spend 8-9 hours a day sitting in front of my PC, and being able to alternate between standing and sitting is a big improvement in my quality of life. My back feels MUCH better. But the Varidesk was expensive, so I looked for lower-cost alternatives. I'm glad I did, because the Rocelco ADR Adjustable Sit/Stand desk is absolutely perfect and cost half of what I would have paid for a Varidesk model.One of the problems with Varidesk is that the lower-cost models can only support 35 pounds. I have a Dell XPS 27, which is a screen and computer all in one, and that weighs 35 pounds all by itself. Add keyboard, mouse and a few other desk essentials, and I'm over the limit. To get a Varidesk model that can support as much as 45 pounds, you'll pay $500.This Rocelco ADR Adjustable desk can support 50 pounds, cost only about $250, and is extremely well-made. Yes, the platforms for the PC and keyboard are pressed board, but it's solid, and the rest of the unit-- the base and weight-bearing supports -- are steel. One big plus: no assembly required. Take it out of the box, put it on your existing desk, and you're done. And it comes in very sturdy packing.I thought the only drawback to the Rocelco desk was that the keyboard tray was recessed too far underneath the top platform, making it hard for me to see the top row of function keys -- then I realized that the keyboard tray is retractable. I just slid it out, and now this setup is has no drawbacks at all. It's perfect.I was worried that the Rocelco would be hard to lift and drop down because of my 35-pound PC, but the steel gas springs make it easier than I thought. The only thing that takes a little learning-curve is how it locks in place. This can be set at four different heights, and when I'm standing (I'm 5-foot-10), I use it in the second-highest position. To get there, I lift the Rocelco desk all the way to the top position (where it will stay even without being locked). Then I reach my hands around each side, resting my arms on the top platform, while putting a thumb on each of the sliding lock rings on either side. Applying downward weight with my arms, I ease the desk downward while gently pushing down on the lock-ring knobs. When it reaches one of the pre-set height stops, I feel the lock slide into place. Then I double-check to make sure each side is properly locked (the word "locked" will be in the middle of the lock ring).That sounds more complicated than it is. Once you know how it's done, you can do it in seconds. And you can drop it all the way down in 2 seconds, with the gas springs easing it downwards.A sit/stand desk may sound like a luxury, but if you spend a lot of time in front of a computer, or you have back issues, you'll find this a godsend. In fact, I'd recommend it for any healthy person who doesn't want to ever develop back issues.

Cost-Effective Great Design and Works!This is likely the most economical unit on the market but it's definitely not the cheapest. We have been using it for over a months now and can't find anything major with it. It sits on desktop and we can lower it to use the computer while sitting--although we do have to raise the office chair on a higher position--and raise it to suit the height of someone standing.The height is adjusted using a rotating level in the back. It's a bit inconvenient and clumsy to use but the user just needs to get used to it. It's a minor beef and is insufficient to take off a point.I have previous purchased a floor standing model that is twice as expensive and requires tools to adjust the height, and there's no way to use it sitting down. The Recelco unit is much more useful.The best part, other than it works well, is NO SET UP!. Taking it out of the box was the hardest part.

I was very impressed with the quality of construction for the Rocelco sit stand desk, it is made of heavy duty metal. I don't know what gauge metal it is made of but it is beefy. The mounting clamp has 3 pressure points so you can get a very sturdy mount. I looked at many sit stand options and decided on the Rocelco Floating Desk. I don't have a-lot of room and i have a small desk, 36 x 24. I didn't want something that took up all my desktop area. This unit can be moved out of the way when you need to use your desk space. There are a ton of adjustments on this so that you can get a position that is comfortable. I don't have anymore neck and arm pain so i know it works! When you first put it together you will need to loosen the adjustable arm quite a bit to free it up so that it can be raised and lowered. I had to adjust the arm about 12 -15 half turns. Once you get it adjusted for your monitor and keyboard weight you don't have to make any further changes, it will move up or down when you push or pull on it. I have one of those ergonomic keyboards and there is enough room on the keyboard tray for the keyboard and mouse. Very nice unit and i am glad i bought it.