No hay artículos en el carro
No hay artículos en el carroMás información del producto
Arturo Romero
Comentado en México el 10 de enero de 2025
La descripción del producto dice que son troqueles 12-R y no lo son. Compré este producto por que tengo una roscadora eléctrica milwaukee y los cabezales 12-R Ridgid son compatibles, pero estos NO son 12-R y ahora los tengo que devolver.
heedwint roosevelt leon reyes
Comentado en México el 30 de junio de 2022
EXCELENTE PRODUCTO , Y LLEGO A TIEMPO GENIAL
José Paredes
Comentado en México el 2 de mayo de 2021
Lo use para darRosca a tubo galvanizado de 3/4 . Funcionó perfectamente , es una herramienta sólida y precisa
Tom & Emily
Comentado en los Estados Unidos el 10 de enero de 2020
I have used the 1/2 and three/4 threaders multiple times with zero problems. I purchased this set to complete a natural gas heater install in my garage. I don’t know exactly how many pipes I threaded, I would guess I probably did 20 three/4 and 10 1/2 with no problems at all. I used plenty of cutting oil and slow even pressure. My only suggestion to anyone planning to purchase this set is to make sure you have a good pipe vice.
Manuel
Comentado en México el 14 de julio de 2019
Buen producto, buena calidad
Dallas Klippenstein
Comentado en Canadá el 16 de diciembre de 2019
Quality as expected from Ridgid. Just used for hobby so should last forever
David
Comentado en México el 14 de diciembre de 2019
Solo tuve unos pocos cortes que yo necesitaba hacer por eso yo compre un juego de tarrajas de la marca Truper. Fue un gran error porque no pude cortar ni siquiera una cuerda en tubo de acero galvanizado de 1 pulgada . Por eso yo compre el juego igual de Ridgid y que diferencia! Utiizando el aceite especial para cortar es como cortando a traves de mantequilla con un cuchillo caliente. Obviamente la diferencia metalurgicamente hablando entre Truper y Ridgid es como la diferencia entre dia y noche.
William I.
Comentado en los Estados Unidos el 21 de febrero de 2017
I was setting up a new shop with air lines so I needed a pipe threader. I tried a HF unit and it broke after 6 threads. So having another 90+ threads to go I got this set. I should have got this set right off the bat. Works flawlessly and the die (1/2") still feels and cuts like new. Never used the 2 larger dies in the set but I would imagine they work as well as the 1/2". This is high quality pro-grade stuff and highly recommend.
Raul
Comentado en México el 17 de abril de 2017
Excelente calidad de corte y robusta. No viene con estuche y debes comprar lubricante por separado q puedes conseguir en ferretera calzada
SootyC
Comentado en Canadá el 27 de marzo de 2016
If you know what this product is and what it is for you don't need to read a review. This is a classic threader the same model I learned on in trade school and the same model I found on the trucks when I went to work. Now that I am getting ready to start my own business I need to buy my own and naturally I went back to what I know. Once you get the hang of using them manual threaders are great all you have to remember is to keep the pipe being threaded clamped tightly in place, make sure the threader is applied flush, and don't skimp on the oil.
Brenda B.
Comentado en los Estados Unidos el 13 de abril de 2014
Needed a tool to thread gas pipe while on a job that was remote. This worked perfect didn't use the 1/2" die but the 3/4 and 1" dies worked excellent, cut around 20 of each size. the more oil you use the better the 1" takes some muscle but cuts perfect threads. Made in U.S as well and is totally different quality then the foreign dies and handle I saw at a local home improvement store.
Productos recomendados
Mex $5,999.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $103.00
Mex $ 58 .00 Mex $58.00
Mex $109.00
Mex $ 59 .00 Mex $59.00
Mex $88.00
Mex $ 44 .00 Mex $44.00
Mex $1,049.00
Mex $ 576 .00 Mex $576.00