No hay artículos en el carro
No hay artículos en el carroyamkipor
Comentado en los Estados Unidos el 8 de enero de 2024
Kinda fast and not accurate scale for the price. It was only slightly faster than my Frankford arsenal intelidropper that cost quarter of the price. In match mode its slow unless you want tons of overthrows. Who ever designed the powder drain part of this scale needs to be fired. The only good part of the powder drain is the scale will let you know if the drain is not closed. Other then that its a real pain. The powder drain is on the bottom so you will have to hold the scale over the powder jug, insert a plastic tube into the drain and open it. Pray that the straw does not pop off and spill powder all over the place. Mine somehow drained powder to the inside of the scale and you can hear it rattling around. Im sure its not supposed to happen. I had to hold a vacuum to the bottom if the unit and shake it till most of it got sucked out. Overall not impressed with this scale. Maybe I was expecting to much, but for the price I expect more when you can buy 3 scales for the price of this 1.
Ces
Comentado en los Estados Unidos el 2 de septiembre de 2023
This is by far the dispenser on the market. I’ve had the other 2 RCBS dispensers currently on the market. I’ve also had the current Hornady. I bought them all at the same time and this thing blew them all out of the water. They’re ok but slow. This sucker is fast. And someone said in the other reviews that this thing doesn’t auto dispense on a custom load. This has NOT been true for me. This thing rocks. Accurate. And fast. It’s expensive but we’ll worth the price if you test drive the other dispensers on the market.
M&L
Comentado en los Estados Unidos el 16 de diciembre de 2022
So far no overthrows and it is working very accurately.I'll update if I have any issues, just make sure to warm the dispenser 30min prior to use and calibrate everytime.
Colin
Comentado en Canadá el 9 de octubre de 2021
This was initially suppose to be an upgrade from my old Chargemaster 1500 ( which gave up the ghost after 15 years).Faster dispensing. Combined trickler and potentially programmability.A total in excess of 1K dispensed rounds were tested over the period.Unfortunately, no consistent - repeatable results with this particular piece of equipment.The biggest issue(s) are:Consistency = repeatabilityThese affect two significant components: the time and number of "dispenses" to achieve a particular number of reloads. The average of 20% overthrows meant that those loads could not be used. Debatable whether the 4% variance (.04 grains +/-) in "Match Mode" threshold would be met.I understand the vagaries of Varget (extruded) powder along with the environment.Ultimately I could not consistently reproduce any of the batch testing results. Nor could I improve on the "better" batches. Batches were based on reprogramming/fine tuning of various parameters within the powder configurations.I ended up returning the unit.However, I must stress my disappointment. I have been a long standing customer of RCBS (reloading components) - over twenty years. The Matchmaster was the largest single purchase and supposed to be the most technologically advanced. It turned out that it did not meet the minimum manufacturer specifications and utter frustration trying to program and obtain those aforementioned specifications.Specific to the BT app:If a custom powder configuration is programmed on the Matchmaster ( and not the app) it can not be modified in the app subsequently - only on the Matchmaster.
Mitchell Kitagawa
Comentado en Canadá el 12 de enero de 2021
When I first got this, it functioned extremely well - was accurate on throws +/- 0.02 grains. Now it usually won’t calibrate properly and is out by up to 0.6 grains on static weight. It’s made for some real reloading frustrations. I’m waiting to hear back from RCBS but nothing so far.Update - RCBS has not been helpful at all. They have about 2 or 3 week turnaround per email response and when they respond it’s pretty pathetic. They don’t seem to take the time to read through my detailed explanation of what is going wrong. I managed to get it working better by fiddling with the transport screw. I though I had it figured out but then suddenly it’s back to failed calibrations and weights that don’t match a properly calibrated acculab scale.RCBS has asked for videos now so I’m sending that and will update again after another month or so. This is brutal. I’ve ordered an Auto Trickler fx120i and will junk this RCBS as soon as the new system arrives. A very expensive lesson.
Productos recomendados