No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Ventilador de refrigeración frontal
Con entrada de ventilador preinstalada de 1 x 120 mm
5.25 espacio
Soporta bahía de unidad de 3 x 5.25 pulgadas
qué hay dentro de la caja de tornillos
Incluye llave para puerta delantera.
Incluye tornillos y espaciador.
Incluye piezas de soporte de plástico para añadir tarjetas.
Caleb Jeter
Comentado en los Estados Unidos el 23 de febrero de 2025
great case to mod. its very large and has enough room to do what you want. very sturdy even cut up. however i do suggest rails cause fully built it weighs a TON lol
colin hutt
Comentado en Canadá el 15 de junio de 2024
Bought this case to replace a tower case that was sitting in my wall mount rack awkwardly taking up space.Initial impressions are the build quality better than expected, the sheet metal is fairly thick and sturdy. The case was easy to work in with ATX MOBO and PSU as well as 8 HDDs on the rail.A few downsides, USB is only 2.0, the pre-installed fan is fairly noisey but just tossed in a noctua 120mm I had.Also, disappointed that Rackchoice doesn't sell a rail kit for this case (At least can't find one).All and all, this 4u rack mount case is something I've wanted for awhile, and I'm happy I finally got it!
George Hoffman
Comentado en los Estados Unidos el 7 de diciembre de 2024
I wanted to move my desktop computer to my homelab server rack to save space. Rails are coming tonight so it's not installed yet but I did confirm it fits fine in standard 3u slot.There weren't many options for server case that would fit a full atx mobo and a full sized atx psu. As per the pictures they all fit with no issues. Hard drive cage can be removed easily if you have a longer graphics card (it's about 16 inches of space and my card is 11 inches. I always go with noctua fans and toss out any case fans.All the screws come with it except cage nuts (which i have a million of anyway).I had to get a lower profile cpu fan/heatsink. The one pictured is be quiet pore rock slim 2. My old one was 6.5 inches and there is roughly 6.25 inches clearance from cpu to the case cover. Find a cpu heatsink under 6 inches.The pcie power cord does fit but just barely with the lid on. I'm worried it will put slight downward pressure on the graphics card over time so I have a 90 degree adapter coming tomorrow (just search 90 degree pcie adapter and there are some 10-15 dollar options).It's very solid and a bit heavier than I expected. Not a pro or a con necesarily. When I tried to install without rails it was heavy enough to make it hard to manage. Def need some server rails with the weight of this tank.Not much else to say. Its a solid case and doesn't break the bank.
Garrett
Comentado en los Estados Unidos el 13 de noviembre de 2024
Everything fits in it pretty well, tons of space! I think the measurements for motherboard placement are a smidge off because it was a little too snug for my liking around the rear IO and slotting expansion cards was a challenge. I was afraid I was going to break them trying to put them in but they eventually went in. Could also just be my motherboard (Gigabyte C246M). But after installation it’s a very study enclosure.
Agustin
Comentado en Canadá el 16 de octubre de 2024
I got this to replace my PC case, Everything fit like a glove. Some points to consider:Cons:- It only holds up to 2x 2.5'' SATA drives- There's not obvious points for fan mounting- You need to buy 2x60mm fans for the back of the case to move air out of the case.- Front fan isn't loud but it also isn't very powerful- Front handles are too large (Can't close doors on rack)Pros:- Large format GPUs will fit- Front USB ports seem to have been upgraded to 3.1- Full ATX PSU fits with ample space
Productos recomendados
Mex $3,097.17
Mex $ 1,548 .00 Mex $1,548.00
Mex $5,547.62
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,848.59
Mex $ 1,253 .00 Mex $1,253.00
Mex $2,799.00
Mex $ 1,315 .00 Mex $1,315.00