Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Pyle inflable cubierta de barco - 9,5 'a 10,5' ft. Armor Shield Protección de almacenamiento - lona impermeable 600 Denier, moho y resistente a la intemperie, con protección UV daños del sol (pcvflt14)

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,464.52

Mex $ 1,133 .00 Mex $1,133.00

En stock

Acerca de este artículo

  • Universal Cubierta de barco: un inflable barco cubierta que se utiliza universalmente para varios tipos a causa de su ajuste personalizado cordón elástico 9,5 'a 10,5' ft. Funciona con los botes inflables, botes inflables (costillas rígido), y botes y barcos.
  • Almacenamiento seguro: hecho de PU recubierto de poliéster con doble costura para mayor durabilidad y resistente almacenamiento seguro. La tapa también viene con una bolsa de transporte para la portabilidad y mantenerlos a salvo.
  • Impermeable y resistente a la intemperie: Construido con grado marino nominal 600 denier lona para sus características resistente al agua y resistente a la intemperie. Va a ofrecer mayor protección de los elementos dañinos.
  • Resistente al moho y los daños del sol: agua no es el único para barcos enemigos, a mucho sol también puede causar graves daños que esta cubierta protectora puede prevenir. Es resistente al moho y UV para proteger contra daños del sol.
  • Fácil instalación y mantenimiento: un bote inflable parece grande para cubrir pero esta armadura Shield ofrece fácil instalación con su cierre de hebilla de liberación rápida. También es muy fácil de mantener con un cepillo para polvo para polvo suave y agua tibia.


Pyle introduces another one of its finest products for safe and secure storage - the inflatable boat cover. This is an outdoor protective vehicle cover used for protection against the elements . Has a water-resistant and weatherproof design to give extra protection to your vehicle.
Features:

  • Universal Boat Cover Design
  • Works with Inflatable Boats, Rigid Inflatable Boats (RIBs), Dinghy (Dingey) Boats
  • Rugged & Heavy-Duty Design for Safe Storage
  • Elastic Cord All Round for Tight Custom Fit
  • Waterproof & Weather-Resistant
  • Quick Release Buckle Fastening
  • Marine Grade Polyester Fabric, 600D
  • Mildew Resistant & UV Resistant Protects Against Sun Damage
  • Double Stitched Seams for Durability


What’s in the Box:

  • Inflatable Boat Cover
  • Storage / Travel Bag


Technical Specifications:

  • Boat Size Compatibility: 9.5’ to 10.5’ Feet (Total Length)
  • Marine Grade Rated: 600 Denier Canvas
  • Construction Material: PU Coated Polyester
  • Sold as: 1
  • Weight: 5.45 lbs.


ChrisWNY
Comentado en los Estados Unidos el 28 de marzo de 2024
Purchased this cover to protect my Saturn FCB290 fishing Dinghy when stored outdoors. The raft is about 9'6" when fully inflated, and this Pyle cover fits it perfectly. The cover fabric is sufficiently waterproof - it needs to be pulled tightly over the dinghy. When covered, I recommend storing the dinghy so that at least half of it is up off the ground and tilted, that way rainwater will run right off of it. If rainwater is allowed to pool up on the cover, it'll make its way inside the raft eventually.When I pull the raft out for use, primarily during the Spring and Fall when I like to fish smaller waterways (and my normal boat is away for the cold Winter months), it's nice to leave it inflated outdoors so I can quickly toss it into the back of my truck and head out on fishing trips with it, with minimal hassle. The biggest enemy of any PVC inflatable is sunlight...over time it not only fades the color of the PVC, UV can also cause premature cracking and slowly breakdown the PVC fabric. Then there's the rain, bird crap, and other junk that floats around outdoors that can get inside and make a mess. Covers are well worth it to keep the dinghy in pristine condition...when you're ready to use it just pull the cover off and head out on the water. Good product...if your dinghy is within the 9-10 ft size this cover has an elastic band around it, should fit over the dinghy fairly tightly without the straps. I'd recommend the straps when trailering so the cover doesn't blow off during travel.
Lisa
Comentado en Italia el 28 de enero de 2024
Misure universali … purtroppo non si può scegliere la taglia e il telo era molto piccolo e non stava sul gommone anche se di dimensioni standard .. peccato perché il materiale è soddisfacente
Mat
Comentado en Canadá el 26 de septiembre de 2024
We've had this covering the dingy on the deck of a sailboat for about 4 months now and it seems to hold up well to UV and weather exposure. The straps are long enough to be convenient, but the fasteners don't hang on to the straps very tightly when there isn't tension on the straps. We've lost them a couple of times and thankfully they didn't go overboard! It would have been better if they were sewn into the strapping, but that's minor I suppose.
Bill B
Comentado en Canadá el 22 de mayo de 2023
Cover fits very well and appears to be very well made. My dinghy is 9.2’ long and the cover is supposed to fit a 9-10’ dinghy. It fits very well and isn’t baggy or loose even though my dinghy is in the smaller end of the size range. It also packs up very small and the storage bag is a bonus.
Ken Kabb
Comentado en los Estados Unidos el 28 de septiembre de 2022
Used on AB inflatable with and without outboard motor. Rain puddles so needs support. Rear a bit sloppy. Otherwise an okay cover.
Productos recomendados

Mex $376.31

Mex $ 203 .00 Mex $203.00

4.4
Elegir