No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Proxicast antena con 10 dBi de recepción 4G y 5G, diseño omnidireccional de alta ganancia adecuado para su uso en exteriores sobre un poste de fibra de vidrio.
Compatibilidad universal
La antena omnidireccional de exterior de 24" de Proxicast es fácil de montar y aumenta la intensidad de la señal para todas las redes 4G/LTE y 5G utilizadas por Verizon, AT&T, T-Mobile, Bell Mobility, Rogers, Telus, Telcel, Movistar, Digicel y otros proveedores.
Es adecuado para puntos de acceso Mi-Fi, módems móviles 4G/5G externos, routers y amplificadores de señal de empresas como Cisco, Cradlepoint, Digi, Inseego, MoFi, Netgear, Pepwave y Sierra.
El diseño omnidireccional de la antena elimina la necesidad alinearla con dejar de proporcionar alto nivel de ganancia.
El tamaño de la antena y su acabado blanco que se integre en cualquier entorno lo que la hace ideal para usos en exteriores, como postes de servicios públicos, remolques de vigilancia, emplazamientos de pozos, unidades remotas de telemetría, contadores, viviendas y oficinas.
Este dispositivo debe conectarse directamente a un módem, router o amplificador/reforzador existente mediante un cable coaxial. NO aumentará la intensidad de la señal de los teléfonos móviles.
Para un rendimiento MIMO óptimo, utiliza nuestro soporte cruzado XBOOM (ASIN B079WTQ4CM) para montar dos antenas idénticas con una distancia mínima de 22 pulgadas (56 cm) entre ellas.
Características principales
- 10 dBi Ganancia máxima
- Cobertura 600-6000 MHz
- Conector N hembra
- 24" (61 cm) de alto
- Exteriores
- Montaje en poste o pared
- Grado profesional
- 10 dBi Ganancia máxima
También puedes necesitar
El cableado adecuado es esencial
Un cableado de baja calidad que no sea adecuado para aplicaciones de alta frecuencia puede reducir la ganancia de la antena. Te recomendamos que utilices nuestro cable coaxial de 50 ohmios y bajas pérdidas de la serie ANT-140-020, disponible en varias longitudes ya preparadas.
El agua es el enemigo
Si la humedad se infiltra en el cableado de la antena, puede provocar cortocircuitos temporales y daños irreparables. Para evitarlo, utiliza nuestra cinta selladora de silicona coaxial ANT-900-002 Pro-Grade para sellar cualquier conexión exterior.
Protección
Es importante protegerse contra los daños que pueden causar los rayos. Nuestros pararrayos de descarga de la serie ANT-2xx-002 proporcionan protección contra rayos de hasta 10 kA cuando se instalan como parte de un sistema de antena exterior.
Para obtener los mejores resultados
- Asegúrate de que la antena está en posición vertical
- Coloca la antena lo más alto que puedas
- Procura que los cables coaxiales sean cortos
- No utilices cables coaxiales RG6 o RG59
- No conectes dos puertos de módem a una antena utilizando un divisor
- Fija bien todas las conexiones coaxiales a los conectores de la antena
- Colócala lejos de otras antenas, aparatos de iluminación, motores, ventanas de baja emisividad o tintadas/revestidas y grandes objetos metálicos o de hormigón.
- Colócate al menos a un metro de distancia de la antena cuando la pruebes
- Céntrate en la calidad de la señal (SINR y RSRQ) más que en su intensidad (RSSI, RSRP y barras).
Ardel Chisholm
Comentado en los Estados Unidos el 21 de marzo de 2025
Good quality components and well built. Worked better than some smaller directional antennas. After finding that I could pick up a signal I installed a large directional antenna and use this omnidirectional as a backup.
CS
Comentado en los Estados Unidos el 19 de agosto de 2022
I used this antenna with a booster, mounted it vertical inside a camper, located near (front to rear center), with some marine plastic - pole holder clips on the side of a cabinet near the outside door. The radiation pattern this way is in the shape of a doughnut laying horizontal which gave our camper good signal from front to rear. It even gives signal about 15 feet outside the door, thru the wall, allowing calls around the campfire. I tried a flat panel antenna at various locations inside with very limited benefit, as you had to be parked in front of it for it to improve the reception signal. I plan to use this in my house as well, mounted near the center of the desired area. At one campground with the Bolton Long Ranger Antenna outside, we went from 0 bars/no signal to 5 bars, excellent signal.
Jelybones
Comentado en los Estados Unidos el 25 de marzo de 2021
Came safely packaged, measurements and hookups exactly as sold, really light in weight.Easy to install, and is already helping me earn more HNT daily!The provided u-brackets fit my existing 1-1/2" diameter satellite pole mount, no problems.- I will be getting a heavier duty threaded nut as the one provided is fairly thin, but I had a heavy storm last night, and everything held together just fine.- I would recommend weather sealing the connection points BEFORE mounting the u-brackets. Trying to get the weatherproof tape in the tight space was not easy.All in all, I am pleased with the purchase and will purchase again in the future if needed. Thanks!
Matthew D.
Comentado en los Estados Unidos el 28 de octubre de 2019
I have installed 3 of these to replace a 3db stubby antennas that were losing connection constantly due to the fact that the cell signal was not the best. Connection is tons more stable now and doesn't drop out like with previously installed antenna. The key is to install this antenna as high as possible. These have been in service for about 2 weeks now the performance is much better than the antenna I was using. If this antenna does not work in your area, you either have no cell service at all or you would need a Yagi and have to properly point it. I would buy more of these.The only thing that I would ding the product for is the threaded area where mount and antenna meet and is also the RF cable connection. The threaded area needs to be slightly longer so you can assure that antenna to mount and coax cable are both tight. As it is now the cable connection will bottom out against the lock nut.
Freddy The Frog
Comentado en los Estados Unidos el 16 de octubre de 2018
These were marketed along with the MOFI receiver/router for AT&T tower reception.I purchased two of them as well as the recommended weather proof/sealed cables that are nicely made.The construction and weather sealing look good, the mounting hardware is also very nice and I covered the connection area with a weather proof silicone boot.I went with a 25' "recommended cable and then after speaking with a RF expert, was told that there would be attenuation on a line that long, so I came back and bought the same weather proof cables that are 3' in length.I was replacing the omni-directional paddle antennas which were working OK, but I wanted more.The Proxicast 10 dBi "high gain" antennas showed no performance improvement over the MOFI-UWB-RANGE1 antennas.Then, after I had already spent the money on these antennas, obtained the weather-proof cables, I was told that I need to also add signal amplifiers which are over $299.00 each.Lots to consider before thinking, as I did, that all you need to do is buy this antenna, cable, and add it to your MOFI router... it's a bigger investment than I was originally led to believe and the performance boost is marginal.I'm back to just the paddles.
Productos recomendados
Mex $469.00
Mex $ 257 .00 Mex $257.00
Mex $269.00
Mex $ 158 .00 Mex $158.00
Mex $1,910.00
Mex $ 802 .00 Mex $802.00