No hay artículos en el carro
No hay artículos en el carroBlacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Blacktip Designs LLC
Comentado en los Estados Unidos el 3 de marzo de 2025
Bought for my Bauer dust collector. Works perfectly.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Zev Weis
Comentado en los Estados Unidos el 26 de mayo de 2024
I got this band as an upgrade for my Grizzly 2HP dust collector. It had the old style stainless steel screw band. I was hard to replace the bag because of limited access and the crew was a pain to tighten while holding the bag in the proper position.With the spring loaded band it's quick and painless. I just place the ring in the 3rd notch and close the lever. Works like a charm.
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
Tim D.
Comentado en los Estados Unidos el 13 de noviembre de 2024
I was getting frustrated with my bags coming loose and spewing sawdust all over my shop, so I decided it was time to look for a replacement. I'm so glad I found and bought this one. First of all, it's a perfect fit and locks in place much stronger than the original strap. Also, this one is made of a super strong spring steel and will not stretch like the original. Heck, even if my machine was brand new, I would still replace it with this strap. It is a a terrific upgrade. Hope that helps! Take care my friends!
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
HS
Comentado en Canadá el 18 de febrero de 2023
Good fit. Well built
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
AJS
Comentado en los Estados Unidos el 14 de octubre de 2023
I purchased this for a Shopsmith DC3300 after another reviewer/responder stated it fit the DC3300. This is false, the 2nd picture shows it is too long for the top/filter and the 3rd picture shows it is way too long for the bottom/collection bag. I cut 9” off with snips, drilled out the rivets holding the teeth, used the old end as a template to drill new holes, and reinstalled the teeth with rivets. Now it fits the DC3300 bottom collection bag as shown in the 1st picture. Would have rated 5 stars if screws had been used instead of rivets.
Productos recomendados