No hay artículos en el carro
No hay artículos en el carroMás información del producto
Confianza y soporte técnico
Poniie se fundó en la idea de proporcionar productos de calidad a los clientes. Ofrecemos excelentes productos de algunas categorías de productos que tienen usos específicos en y alrededor de la vida diaria.
Herramientas de calidad, mejorar las cosas buenas. es nuestro lema.
- Servicio en línea 24/7
- Soporte técnico
- Más valor incluido
Ahorre en sus facturas de electricidad
Poniie PN2000 - Monitor de uso de electricidad
Las facturas de electricidad están aumentando. Ahora puede contar el consumo de energía por kilovatios-hora y evaluar qué aparatos realmente vale la pena mantener enchufados. Simplemente conecte a una toma de corriente estándar y luego conecte un dispositivo a esta unidad. Usted es capaz de comprobar la calidad de su potencia monitoreando voltaje, amplificador, frecuencia y factor de potencia.
Recordatorio:
La luz de fondo se puede ajustar para permanecer encendida. En la pantalla 'CUR', mantén pulsado 'Set' para entrar en la configuración. Pulse el botón 'Arriba' o 'Abajo' para seleccionar 'Activado'.
- Precisión refinada clase 1.0 con resolución de 0.01W, 0.01V y 0.001A
- Medidor profesional de kilovatio con detección de arranque 0,20 W
- Medidor de vatios de alta potencia con tolerancia de alta potencia nominal de máx. 16 A
Especificaciones técnicas:
Con cable de extensión resistente. Precisión del medidor: Clase 1.0; 0.5%-1.5%. Potencia de entrada: 110-125V 60Hz/220-240V 50Hz. Corriente máxima: 16 A. Potencia máxima: 1800 W (@120 V). Rango medible: superior a 0,20 W. Resolución: 0,01 W, 0,001 A, 0,01 V. Medidas: Vatios, corriente, voltaje, frecuencia, factor de potencia, tiempo de trabajo acumulativo (CT), consumo de electricidad (EC-w/memoria). Función de luz de fondo: Apagado automático de 10 segundos (se puede ajustar el mantenimiento). Dimensiones: 12 x 6 x 5,5 cm
Herramienta útil para el hogar y el taller
Características únicas
Gran pantalla LCD retroiluminada, gran ángulo de visión de lectura, carcasa ignífuga, función de indicación de sobrecarga, medidor de vatios de alta potencia de 16 A
Diseñado para la mayoría
Este dispositivo adopta un chip de medición de electricidad dedicado en combinación con un sensor de corriente de alta precisión, lo que lo convierte en una excelente herramienta tanto para hogares como para electricistas. Incluso puedes usarlo como un monitor para encontrar el consumo de energía cada vez que haces una carga en casa para tu coche eléctrico.
Notas de usuario
Solo memoria de circuito de retención para CT y EC-kwh. CT solo significa el tiempo de funcionamiento de su dispositivo, no el tiempo transcurrido. Es una métrica para evaluar tu aparato como congelador, etc.
Customer
Comentado en los Estados Unidos el 22 de julio de 2024
Plug an electrical device into the Poniie watt meter to measure the wattage, current, or voltage flowing through. You can also set the Poniie to measure the amount of kWh used over a period of time, good for determining how much an electrical device costs you during usage. The display on the Poniie is of high quality and brightness, making it easy to read.Product also comes with an extension cable of about a foot long, so that you don't block multiple outlets in a wall or power strip. It additionally comes with an operation manual.Ultimately, the Poniie watt meter does precisely what you'd expect, and perhaps a little beyond that, at a high level.
STEVEN CHAPO
Comentado en Canadá el 4 de agosto de 2023
I like that this meter doesn't need batteries. I used it to check the running power of a freezer and fridge not just the starting draw, because I wanted to know what I could all run off my generator when the power is out. I also discovered that a spare tv in the basement was drawing 40 watts when off. So it's now unplugged. The meter is very easy to use and read. The price is reasonable as well.
Customer
Comentado en los Estados Unidos el 1 de marzo de 2023
For me, a valuable feature is the ability to turn on/off the display backlight; I like to leave it on when testing, otherwise it will turn on when you select it and stays on long enough to get a reading then turns off. The light blue backlighting (when on) provides excellent contrast with the readings. The only negative comment about the display is the very small data identifiers (watt, cur, volt etc.) which makes reading them challenging more than a few inches away from the display. However in all fairness, this can also be said about many similar monitors.This monitor seems very accurate. I tested it using a resistive load (incandescent light bulb) of 100, 200 and 300 watts and the readings were constant so comparing the observed voltage, current and power correlated closely with the calculated power (voltage x current).If you are testing an inductive load such as anything with an electric motor, the displayed values were not as constant when viewed individually; they were constantly drifting within an expected range. If you attempt to measure reported verses calculated power under this circumstance, the observed voltage and current will not be correlated in time because you have to cycle though the selector buttons to read the values. The more the individual values vary the more the calculated power could vary and you might assume that it is not reporting accurately. Test it with a resistive load if you want to determine power measurement accuracy.It has other features that provide valuable information if you want to determine how much power a device is using over a protracted period of time, such as a refrigerator. From that you can determine the cost of the energy the device is using.Overall it seems to be put together well and I especially like the inclusion of a short extension cord that allows you to move it a bit closer to you when reading and as an aside, that also allows you access to both sockets on the receptacle when the monitor is plugged in. I found the instructions clear and easy to follow. If you are looking for a good electric monitor, I can easily recommend this model.
Anon
Comentado en Canadá el 16 de noviembre de 2020
This replaces my previous Kill-a-Watt meter ( terrible calibration, save your money for this one). The calibration seems very good, I will compare to a DVM later. Resolution is as good as practical, considering V, I and f fluctuations. The backlighting is useful. If I had to criticize, minor, it would be Elapsed Time (how long the load is on, cumulative) because the threshold for "on" is low and not adjustable.The instructions are bit short. Be creative in how to Set things.Zon is asking me to rate Thickness. By existing in space, I must rate this meter's thickness as five stars, I can confirm that it has thickness and does it well.
Instructor Too
Comentado en los Estados Unidos el 25 de julio de 2018
The Poniie PN2000 is an easy to use and simple device after you read the instructions and various customer reviews in order to figure out the menu settings. The device is well made, the digital read out is easy to read, and it works just as described.From the owners manual: The device can measure Watts (active power), Current (true RMS), Voltage (true RMS), Frequency, Cumulative Time (with hold over circuit memory), Electricity Consumption (with hold over circuit memory) and Power Factor (as Watts/Vrms*Arms).The important numbers to figure power being used by an electrical device are the "cumulative time" and the "energy consumption".You plug the meter in line with the device you want to monitor and then simply divide the cumulative time (this being the "stopwatch" time that the device is pulling power - if the electrical device is turned off for a while the timer does not keep adding minutes to the clock and picks up again when the device is turned back on, by the electrical consumption. The time is given in minutes so we find it easiest to figure out how many kilowatts were used by "the minute" and then multiply times 60 to get the power used in a kWh (kilowatt hour). For an item like a refrigerator that cycles on and off constantly you might want to leave the device connected for a lengthy period (perhaps 24 hours or longer) in order to get a more accurate power use profile as it cycles on, then off, then through a defrost cycle, and so on. Simple "on or off" devices might only need to be monitored for a half-hour or even less to find out the energy consumption.Unfortunately, like many of Amazon's sellers these days, the Poniie PN2000 seller sends the buyer e-mail asking them to write a review of their product if they like using it. E-mail from sellers requesting the purchaser write a review is what has ruined Amazon's best feature, and those reviews are always suspicious as not only no. Too bad that the seller doesn't have enough faith in their product and has to prompt buyers to write a review.To make it simple we divide the monthly electric bill total by the number of kilowatt hours used found on the monthly bill to get a per hour kW price, and then multiply that number times the kWh for the device we were monitoring (we're currently paying 0.12 cents per kWh).
Productos recomendados
Medidor de energía WiFi inteligente de 3 fases con sensor de nivel de circuito de 3 120 A, 100-240 V
Mex $1,826.85
Mex $ 895 .00 Mex $895.00
Mex $314.00
Mex $ 144 .00 Mex $144.00
Mex $1,576.16
Mex $ 788 .00 Mex $788.00