Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Placa adaptadora para Glock 43X/48 MOS y Hellcat OSP, óptica de precisión placa de montaje de punto rojo para Holosun 407K/507K, titanio duradero de grado aeronáutico con

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,165.95

Mex $ 547 .00 Mex $547.00

En stock

1.Nombredeestilo:Titanio Con Soporte Completo De Lengüetas De Retroceso


Acerca de este artículo

  • Amplia compatibilidad: compatible con Glock 43X/48 MOS y Springfield Hellcat OSP, esta placa de montaje óptico de precisión es perfecta compatible con la óptica Holosun 407K/507K con una huella RMSc. No se requiere modificación de diapositivas, por lo que es versátil para necesidades tácticas y competitivas.
  • Estabilidad mejorada con postes de retroceso reforzados: diseñada con un robusto soporte de retroceso, esta placa adaptadora garantiza que su óptica permanezca en su lugar de forma segura bajo condiciones de alto estrés o de retroceso pesado, proporcionando una fiabilidad constante para aplicaciones tácticas.
  • Fácil instalación: con un diseño de una sola pieza, esta placa se instala sin esfuerzo con tornillos de montaje incluidos. Su ajuste seguro elimina el movimiento, asegurando un rendimiento sin oscilaciones en entornos exigentes al aire última intervensión o de alto retroceso.
  • Diseño ligero: con un perfil ultrafino de 0.04 pulgadas, esta placa adaptadora reduce la altura sobre el taladro, manteniendo la capacidad de co-testigo y mejorando la velocidad de disparo de seguimiento, todo sin añadir peso o volumen innecesario.
  • Mecanizado de precisión de titanio: fabricado con titanio de alta resistencia y acabado con una superficie anodizada de revestimiento duro MIL-SPEC tipo III, esta placa ofrece una resistencia excepcional al impacto, protección contra la corrosión y durabilidad duradera en condiciones agresivas.


Amplia compatibilidad: específicamente diseñada para Glock 43X/48 MOS y Springfield Hellcat OSP, esta placa de montaje óptico de precisión es un ajuste perfecto para la óptica Holosun 407K/507K con una huella RMSc. No se requiere modificación de diapositivas, por lo que es versátil para necesidades tácticas y competitivas.

Estabilidad mejorada con postes de retroceso reforzados: diseñada con un robusto soporte de retroceso, esta placa adaptadora garantiza que su óptica permanezca en su lugar de forma segura bajo condiciones de alto estrés o de retroceso pesado, proporcionando una fiabilidad constante para aplicaciones tácticas.

Fácil instalación: con un diseño de una sola pieza, esta placa se instala sin esfuerzo con tornillos de montaje incluidos. Su ajuste seguro elimina el movimiento, asegurando un rendimiento sin oscilaciones en entornos exigentes al aire última intervensión o de alto retroceso.

Diseño ligero: con un perfil ultrafino de 0.04 pulgadas, esta placa adaptadora reduce la altura sobre el taladro, manteniendo la capacidad de co-testigo y mejorando la velocidad de disparo de seguimiento, todo sin añadir peso o volumen innecesario.

Mecanizado de precisión de titanio: fabricado con titanio de alta resistencia y acabado con una superficie anodizada de revestimiento duro MIL-SPEC tipo III, esta placa ofrece una resistencia excepcional al impacto, protección contra la corrosión y durabilidad duradera en condiciones agresivas.


Ali Al-Nasser
Comentado en Arabia Saudita el 6 de marzo de 2025
حلووو في اللصق ونحيف لكن لايتحمل أوزان ثقيلة
greenhousemom
Comentado en los Estados Unidos el 27 de marzo de 2025
Great tape. was used to temporally put items on. And came off pretty easy. But stayed on when in use
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
HBird
Comentado en los Estados Unidos el 24 de marzo de 2025
Fits fine, is extremely light weight, 7g or .25oz with screws, and well made. Comes in an actually pretty decent plastic storage case, and the screws even have blue thread lock pre-applied. The recoil lugs/pins seem a tad shallow compared to some others I've seen, but some plates don't even have lugs at all, and these should still be adequate, as long as everything stays tight. Overall, at around half the price of aluminum plates I've seen, and still cheaper than even some heavier steel adapter plates, it's an outstanding value for the price.
Pri
Comentado en los Estados Unidos el 17 de enero de 2025
I’ve gotten six of these because I use these for a lot of things around my house and my travel trailer. It’s very sturdy, it actually held my full size mirror in my travel trailer Granite that mirror is lightweight however it’s only held by the tape and it’s been there for a year and a half. I have also used for pictures and other things around the house. I absolutely love this tape.
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
FERMINATOR
Comentado en los Estados Unidos el 15 de abril de 2025
Great
Jon
Comentado en los Estados Unidos el 21 de abril de 2025
Great fit to bot the optic and optic cut. Stays tight, easy installation, seems rigid and stable. The description says it is made of aluminum, but the box says titanium, so I'm not sure what to believe, but with the price I assume it's aluminum. Great value either way. Will not allow for cowitnessing of factory sights on a Hellcat.
ErikW
Comentado en los Estados Unidos el 20 de abril de 2025
Worked perfectly to mount a 407K to my Glock 43X. Everything lined up perfect. What else is there to say?
Dillon
Comentado en los Estados Unidos el 15 de abril de 2025
Great product, holes lined up beautifully and the fit was snug and it came with all the screws and even a couple extra because they are easy to lose which was cool. 5 stars!!!
Mr.3LooSH
Comentado en Arabia Saudita el 26 de junio de 2024
A
Garth
Comentado en Australia el 1 de octubre de 2023
Arrived on time and works as expected.
Productos recomendados

Mex $665.17

Mex $ 365 .00 Mex $365.00

4.3
Elegir

Mex $457.65

Mex $ 215 .00 Mex $215.00

4.8
Elegir

Mex $1,036.77

Mex $ 518 .00 Mex $518.00

4.4
Elegir

Mex $783.42

Mex $ 376 .00 Mex $376.00

4.6
Elegir