No hay artículos en el carro
No hay artículos en el carro Juego de tornillos métricos para muebles:
80 tornillos métricos para muebles vienen con taladro giratorio de acero blanco de 9 mm y llave hexagonal de 6 mm.
Características de la tuerca de inserción:
Estos insertos roscados se insertan en un agujero preperforado atornillando, en ese caso las protuberancias externas muerden en la madera, evitando que la tuerca se gire o se salga.
Aplicación adecuada:
Fácil de instalar y con buena estabilidad, tiene un buen efecto en la combinación de muebles, adecuado para todas las maderas de muebles de pino, madera contrachapada, tablero de fibra, etc.
Modo de uso: pretaladrar/perforar un agujero de tamaño adecuado y entrar con un tornillo de herramienta Allen.
PS:1. La profundidad del agujero es de 1 a 2 mm más larga que el tornillo para muebles.
2. Si esa dureza del material de madera es alta, amplía un poco el agujero del tornillo para adaptarse al tornillo.
Especificaciones:
Material: acero al carbono de alta dureza y alta calidad.
Tamaño:
Tornillos para muebles: M6
Diámetro externo: 10,5 mm.
Diámetro interior: 8 mm.
Longitud total: 20 mm.
Taladro: 9 mm.
Llave hexagonal: 6 mm.
Cantidad:
80 tornillos para muebles.
1 taladro.
1 llave hexagonal.
Nota: Objetos pequeños y brocas afiladas, por favor, manténgase alejado de los niños
Edward Lomax
Comentado en los Estados Unidos el 12 de marzo de 2025
They worked perfectly. Had to make new wooden seat boards for outdoor bar stools. They worked as they should. As a kit it's everything that you need to make the attachment screws hold the seat boards in place. I love that it comes with the drill bit. It's an all inclusive kit, anchors, drill bit and Allen wrench to tighten the anchors into your wood project. The original ones were plastic. These being metal gives me the piece of mind that I can replace or reuse them if needed.
Customer
Comentado en los Estados Unidos el 24 de febrero de 2024
PGMJ M6 wood inserts bolt furniture screws were used as the clamp hold down backing insert for a ~48” x 48” CNC spoil board. More than 350+ inserts were arrayed onto to the spoil board to provide multiple cam-clamp and hold-down options. Using the provided drill bit as a guide more than 350+ through holes hold were drilled into the MDF spoil board with a CNC bit. A cut down Hex wrench/driver (which was provided) was mounted to a cordless hand drill and used to insert the M6 wood inserts bolt screws flush the back of the MDF spoil board. Installation was a breeze, no inserts cross threaded into the drilled holes of the 3/4" MDF, given the number of inserts used. Only 1 or 2 inserts out of the 350+ used did not readily fit the hex driver proved. The M6 wood inserts bolt screws were matched with VIGRUE M6 x 12/14/16/20/25/30mm button head socket cap screws bolts with no issues. The spoil board with wood inserts bolt has been in constant use for about 3 months. Although the PGMJ wood inserts bolt furniture screws are probably not designed for the constant use (threading and unthreading), they appear to be holding up well given the CNC debris and torque applied to them. For this application I would highly recommend them. Importantly the M6 wood inserts bolt furniture screws were as specified in the description. and the provided drill bit and hex wrench made the installation much easier. Great product.
JI
Comentado en Canadá el 6 de mayo de 2023
These are awesome. So much better than the hammer in type. Having the correct sized drill bit included is a real time saver as well. Excellent.
Adam M
Comentado en Australia el 12 de diciembre de 2023
Worked a treat. Granted I used them on pine but had no problems with them whatsoever.
Customer
Comentado en Canadá el 18 de septiembre de 2023
The drill bit works great, the hardware works great, and I had no problem with any of the threads whether that is screwing them into wood or fastening bolts into the hardware, will be buying these again
Productos recomendados
Mex $249.00
Mex $ 149 .00 Mex $149.00
Mex $337.00
Mex $ 185 .00 Mex $185.00