Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

pasivo Inyector PoE y POE divisor Kit con conector 5.5 x 2.1 mm DC

Envío gratis en pedidos superiores a Mex $600.00

Mex $238.63

Mex $ 126 .00 Mex $126.00

En stock

1.Color:Negro


Acerca de este artículo

  • Kit de inyector y divisor PoE con conector de 5,5 mm x 2,1 mm CC
  • Permite el uso de cualquier voltaje CC de hasta 57 V
  • Solo soporta red de 10 100 Mbps.
  • Transforma dispositivos no PoE a PoE habilitados para PoE
  • Uso con cámara de seguridad IP, punto de acceso inalámbrico y otros dispositivos


Nota: Este kit necesita el adaptador de corriente externo para encender el dispositivo.
El kit de inyector PoE pasivo y divisor PoE permite un bajo costo de suministro de energía a través del cable de red para distancias más cortas.
Este kit permite que la alimentación se lleve en redes 10/100 a través de los pares de repuesto, no utilizados de un cable de red Ethernet CAT5, CAT5E, CAT6 o CAT7. En longitudes de red más cortas, la fuente de alimentación podría alimentar el punto de acceso inalámbrico, la cámara de vigilancia de vídeo IP, el teléfono IP, etc.
Este kit contiene inyector y divisor muy rentables. El inyector inserta el voltaje de CC en la ubicación de la fuente en el enchufe del inyector de 5.5m m x 2.1m m,
A continuación, el voltaje de CC corre a través de los pares de repuesto del cable de red 10BASE-T o 100BASE-T al lado del divisor,
Y el divisor divide el voltaje de CC del cable de red en el conector DC de 5,5 mm x 2,1 mm.
Alfileres de alimentación: 4/5 (+), 7/8 (-)
¿Qué hay en la caja?
1 x cable del inyector PoE;
1 x cable divisor PoE;"


G. S.
Comentado en los Estados Unidos el 15 de marzo de 2025
It's an easy way to inject DC and recover it at the other end.Speed test showed 100 Mbps at 2 feet, while carrying 2W or 20W.Speed test showed 10 Mbps at 250 feet (carrying 2W).Ethernet plugs have 4 conductors, as expected.
blueshore
Comentado en los Estados Unidos el 24 de diciembre de 2024
The kit only use two pairs of wire (Orange 1/2 and Green 3/6) which is great in case your PoE switch power output can not be shutdown. Inner contact uses both Blue (4/5) pair of wires and outer contact uses both Brown (7/8) pair. Made a couple of tests and got good results. Would it be nice to have that info first hand, but other than that this looks like a good product. Just a reminder that DC voltage is affected by distance unlike AC voltage; test the voltage drop before deploy.However I was not able to deploy them on the project due to delivery issues (Amazon/USPS: when a package says “Delivered” it means delivered not “Scanned as Delivered one day and actually Delivered a couple of days later”).
Ilia Tkebuchava
Comentado en los Estados Unidos el 19 de septiembre de 2023
I really recommend this product.I think this comment will help many buyers because before I bought it I didn't have an answer to these questions.First of all, I should mention the quality, the plastic and the cable are quite high quality. It came packed in a special factory bag.I needed this product to power the IP camera.There is a 20% copper internet cable in the wall, which made me afraid of how much power it could carry. This product worked great.In my case, the power source is 12 volts 1 amp.With this method, both audio and lighting worked on the camera.
XM
Comentado en Canadá el 17 de mayo de 2022
I bought this only for the PoE injector, but there was none when it arrived. I had to return it.
Bobby rutgers
Comentado en Canadá el 16 de febrero de 2021
Worked fine to bypass POE power around a non POE switch.
Productos recomendados

Mex $599.00

Mex $ 317 .00 Mex $317.00

4.5
Elegir