Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Partsam - Juego de 5 luces LED de color ámbar de 24 luces LED para techo de cabina ahumada, 264146BK, arnés de cables de montaje para camionetas 1500 2500 3500 4500 5500 2003-2018

Envío gratis en pedidos superiores a Mex $600.00

Mex $679.41

Mex $ 360 .00 Mex $360.00

En stock

Acerca de este artículo

  • Número de pieza: 264146BK
  • Aplicación: luces marcadoras de cabina, marcador de cabina de techo, luz de techo para correr, luz de liquidación.
  • Cada kit cuenta con lentes de plástico ABS súper fuertes que han sido tratadas con rayos UV para que no se desvanezcan debido a la exposición prolongada a la luz solar y a los elementos climáticos.
  • Es posible que se requiera modificación o perforación. Se recomienda la instalación profesional; no enchufar y usar; fácil de instalar: simplemente retira las luces de tu cabina de fábrica y atorníllalas en su lugar. Cableado: el blanco está a tierra y el negro es positivo.
  • Consejos: los agujeros de montaje están en la parte delantera y trasera, si los tuyos están en el lado izquierdo y derecho. Se necesita posicionamiento y perforación, por favor para otro tipo


Aplicación: luces marcadoras de cabina, marcador de cabina de techo, luz de techo para correr, luz de liquidación.
Compatible con los siguientes vehículos: marcador de cabina de techo 2003-2016, 1500, 2500, 3500, 4500, 5500.
Número de pieza: 264146BK
Características:
Luz de marcador de 12 luces LED de alta potencia para techo de cabina.
Viene con lente ahumada de alta calidad con lámparas LED ámbar integradas.
Reemplazo directo para las luces de marcador de cabina ámbar instaladas.
Mejora la visibilidad durante la noche, día de niebla, lluvia fuerte y nieve.
Puede que se requiera modificación o perforación. Se recomienda encarecidamente la instalación profesional.
Cada kit cuenta con lentes de plástico ABS súper fuertes que han sido tratadas con rayos UV para que no se desvanezcan debido a la exposición prolongada a la luz solar y a los elementos climáticos.
Fácil de instalar: simplemente retira las luces marcadoras de la cabina de fábrica y atornilla en su lugar.
Viene con enchufe T10, conveniente para modificar y recablear.
Almohadillas suaves incluidas, aptas para pies rápidos o techos curvos.
El paquete incluye:
5 luces de luz para cabina de humo.
1 paquete de cableado (interruptor, 1 cable corto con fusible, 1 cable largo, 10 tornillos de metal, 10 anillos de plástico).
Otros accesorios no incluidos.


enrique dominguez
Comentado en los Estados Unidos el 3 de abril de 2025
Very bright, really happy with these
Erblake1989
Comentado en los Estados Unidos el 5 de febrero de 2024
These look great. My truck didn't come equipped with clearance lights, so installation for me wasn't plug and play.I'm not sure how everyone else's lights arrived, mine showed up with a foam backing that wasn't attached.Day before install, I silicone the foam pad to the bottom of the lights creating a barrier around the perimeter. Then, when I installed, I repeated the process between foam and truck when installing. Also siliconed the screw holes, holes for cable, around the installed light and over the screws.Make good connections and seal it up as thoroughly as you can and you should be fine.Will update if necessary but these were perfect for me. Hope they last a long time.
rem
Comentado en Canadá el 13 de junio de 2022
2 working on 5 now that i have drill hole in my cab cant get them of
Svetzy91
Comentado en Canadá el 11 de mayo de 2021
So far not so good after 2 months one light stopped working.
Kim Kozuma
Comentado en los Estados Unidos el 16 de febrero de 2018
These lights were of a better quality than stock. Had to replace because 3/5 lenses cracked and water leaked into my cab. The electronics were of high quality and sealed nicely compared to stock, easy to install plug & play. If doesn't light up then rotate back end that plugs in by 180 degrees to find correct polarity. DON'T OVER TIGHTEN screws. Tips - I used flex seal tape on the roof and under and ran the wires through an "X" that I cut out with an exacto knife to prevent any future leakage. Additionally, the base and screw holes were siliconed from the outside as well as the clips on the inside where the screws came through the roof. Before plugging in I applied a dab of dielectric grease to ensure no further corrosion and good connectivity. The biggest PITA was removing the headliner and posts. Main thing there is patience. Same for doing the extra little steps ex. silicone. This product used high quality screws and with the silicone, should last indefinitely. Looks great, very bright and directional. On a side note, if you decide to trim the flex seal tape after it is applied and peel any excess off, it is a mess! My friend now knows what we girls go through when waxing. Yep, it is a bit hairy on top but I don't care, you don't see it and most if all, this thing NO LONGER LEAKS! Excellent construction, better than stock, easy to use, well worth the price. PS - the screws go in N-S not E-W for anyone wondering.
Productos recomendados