No hay artículos en el carro
No hay artículos en el carroDescripción del producto
CONFIANZA DESDE 1963
Desde nuestros orígenes en la parte posterior de una tienda de bicicletas en 1963, nuestra única misión ha sido diseñar y fabricar herramientas de alta calidad que permitan a los mecánicos y ciclistas de todos los niveles de habilidad para dar servicio a sus bicicletas. Al igual que con nuestras otras 500+ herramientas, el DT-2 es un producto de nuestras décadas de experiencia y experiencia en la industria, en la tienda y en el sendero.
Fredrik
Comentado en Suecia el 31 de enero de 2024
Inte mycket att säga här, använder den mer ofta för att böja andra metallbitar än bromsskivor. Bra kvalitet utan att vara överdriven i material.
Paul
Comentado en el Reino Unido el 22 de abril de 2024
Fortunately this arrived the same day I realised a new rotor that I had ordered was slightly bent!Original bought for my old rotors I used it to true the new one. Worked a treat, you have to be patient and really spend time working out the bend. I bought it for straightening some old SRAM Centreline rotors which fit in the the larger slot but used it on a Sram HS2 rotor which only fits in the smaller slot, still did the job.I can see me using this a lot.
Timo W.
Comentado en Alemania el 6 de abril de 2024
Hallo,Ich habe mir dieses Richtwerkzeug gekauft, um meine Scheibenbremsen wieder gerade zu machen. Dies funktioniert sehr gut. Die Qualität für Park Tool ist wie immer sehr gut. Ich finde trotzdem, dass der Preis doch recht hoch für ein so simples Werkzeug ist. Würde es aber trotzdem immer wieder kaufen.
Angelo L.
Comentado en Italia el 16 de mayo de 2023
Scoperto in un tutorial di youtube si è rivelato molto utile, a patto di usarlo con delicatezza.
Spike
Comentado en los Estados Unidos el 4 de marzo de 2020
The Park Tool DT-2 Rotor Truing Fork is a solid, heavy duty piece of hardware. Sure it’s a simple idea for a tool, but it’s well thought out & designed. The tool is cut from a thick piece of steel (0.25 inches [6.25mm]), much thicker than those that are priced for less. The balance point on the DT-2 is pretty d@mn close to the midpoint of the tool. Once you hold Park Tool’s truing fork, you’ll immediately understand the price difference. The thickness of the tool & tapered middle allows for a comfortable grip & placement of your thumb like you would when using a knife to whittle or do a push cut. This allows for a good deal of leverage. The plastic rubber wrap around the DT-2 also adds to the comfort & handling of the tool while using.If your bike has disc brakes & you perform basic maintenance on it yourself, the DT-2 is something you should have in your toolkit. Sure you can use a screwdriver, pliers, channel-locks, almost anything that you can wedge & use as a lever, but w/the right tool for the job, you won’t mar, scratch or damage things unnecessarily. If you run larger rotors (180mm+), then you really should have this in your kit. This tool will pay for itself many times over. Besides saving the cost of paying the shop to straighten or replace a bent rotor, you’ll be able to keep your rotors true to prevent unnecessary & excess wear on brake pads which would result more frequent replacement.On some of the tools I have purchased for my bike kit, I chose to go w/less expensive manufacturers other than Park Tool. I don’t have money to through away. However, there are some tools I feel are worth the extra money, either because of the impact on safety, frequency of use (longevity of tool) &/or possible damage to bike while using. The A rotor truing fork is one tool I feel meets all those requirements.Even if you decide the Park Tool DT-2 Rotor Truing Fork is not for you because of cost, I would recommend you pickup another truing fork to maintain your rotors.Thank you for taking the time to read my review, I hope you found it helpful.
YKS
Comentado en México el 2 de marzo de 2020
Es una herramienta duradera como todas las Park Tool, cumple con su función, es muy fácil de usar, solo hay que acostumbrarse a ejercer la fuerza adecuada para no torcer mas los rotores.
Productos recomendados
Mex $139.00
Mex $ 82 .00 Mex $82.00
Mex $901.20
Mex $ 495 .00 Mex $495.00