No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Tipo de artículo
Conectores de tornillo EMT
Material:
Aleación de zinc
Color
Plateado
Cantidad
- 25
Se utiliza para conectar tubos de metal eléctricos de 1/2 pulgada (EMT) a centros de carga, cajas de salida de acero u otros gabinetes de metal. Cuando se fija con cinta, el hormigón está firmemente conectado y adecuado para aplicaciones de más de 600 voltios. El paquete incluye 25 piezas de los conectores de tornillo de fijación EMT.
S. Meyer
Comentado en los Estados Unidos el 7 de marzo de 2025
These are zink alloy connectors. They have set screws that accept slotted, Phillips, and Robert’s (square) drivers. The cost about the same as what I pay at my local orange store. I haven’t found any problems with them.I prefer the steel ones that I get from a local supply house for the same price.
The Nelsons
Comentado en los Estados Unidos el 17 de marzo de 2025
These are great EMT set screw connectors for electrical conduit work. I couldn't find any real differences between these and a pack I picked up from the box store. Pipe hole size was correct, and the EMT inserted with the right amount of play, and I was able to tighten the locking ring into the junction boxes easily, with no slippage on the nut. I had no thread issues tightening down the connector to the pipe. Great value!
Craig Wilson
Comentado en los Estados Unidos el 10 de febrero de 2025
These are good quality conduit fittings. They fit well, easy to install, the screws didn't strip and they do what they are supposed to do. I will be buying these again.
DiggerOne
Comentado en los Estados Unidos el 7 de enero de 2025
Purpose for Product: Building a new 20'x20' storage building and these 1/2" EMT connectors willhelp provide the necessary infrastructure for the electrical wiring.Product Inspection: Resealable plastic bag containing 25, zinc cast 1/2" conduit connectors.The connectors are the set screw type-all the parts were present.They were no sharp burred edges observed-especially important as to thethreaded end where the wire will exit the conduit, bend and enter the box.This is the area most likely to cause a problem by cutting the insulation ofthe wire.The logo- S1 C UL US is displayed on each piece- guessing this is the ULcertification for USA.Product Performance: Installed a connector into the 1/2" KO opening of a metal box. Connectorfit as it should. Applied the nut which threaded correctly and tightenedsecurely. 1/2" conduit fit with the set screw tightening securely.Summary: This package of 25 1/2" EMT connectors should be adequate to complete the wiringof the new storage building. Could find no defects
Brian Eastwood
Comentado en los Estados Unidos el 25 de enero de 2025
Great little conduit box interface fittings, nice hardware works perfect!
Productos recomendados
Mex $475.76
Mex $ 218 .00 Mex $218.00
Mex $96.38
Mex $ 54 .00 Mex $54.00
Mex $292.00
Mex $ 148 .00 Mex $148.00