No hay artículos en el carro
No hay artículos en el carroOkinos Aqua 3, funda Micro ATX, funda MATX para PC con ventilador ARGB de 3 pines preinstalado, vista panorámica panel frontal y lateral de vidrio templado con puerto tipo C, color negro
Suki
Comentado en los Estados Unidos el 9 de marzo de 2025
Easy to build in, plenty of cable management space for what it is. The three included fans are a great value too.
Andrew M Neely
Comentado en los Estados Unidos el 25 de febrero de 2025
This case is unique and functional I really enjoy the small form-factor, and the side-ways orientation (the front panel is the long side of the case.) I built my system around the Asus B450 a- Wifi II board. The ARGB fans are great. My only issue is that the fans are 3-pin and not 4-pin pwm (three pin fans are compatible with the 4-pin, PWM motherboard header. It only uses the first three pins.) Also, all three fans are set as intake, and two fans on top as intake will suck dust into the case. There's plenty of room in the case for large GPUs. The removable glass side panel makes working in the case easy. The back panel has plenty of room for cable management.
Fallon Shane
Comentado en los Estados Unidos el 18 de enero de 2025
So I’ve been building a lot of pcs recently and this one stood out with the price and the 3 pre installed ARGB fans, Decent quality, great Aesthetics, Bunch of screws, Quite small which could be great for not taking up space and I appreciate the hub thing on the back because I don’t have an rgb header on my motherboard but it could just plug into the power supply instead so worked out perfectly!
Leonardo Onra
Comentado en México el 28 de julio de 2024
Lo más compacto en gabinete con vista de pecera. Totalmente recomendable, con buen precio, 3 ventiladores argb 120mm. Excelente compartimiento para todo lo que te plantea. Calidad es buena, conforme al precio. Cuenta con USB 3.0 front panel!!NO se sacrifica espacio para GPU, pero si pierdes en ventilación, unas por otras. Tendrás que definir bien cuál es tu objetivo, si tu interés es el menor espacio para tu PC y además un excelente diseño de pecera, te va encantar.TEMPS con mi ANTERIOR gabinete:CPU: 69c - 71c cinebench20 a 10min.GPU: 60c - 62c en 3dmark steel nomadTEMPS con Okinos Aqua 3 ACTUAL gabinete:CPU: 76c - 77c cinebench20 a 10minGPU: 60c - 62c en 3dmark steel nomadMi 5700x3d ha aumentado 6c grados debido que no cuenta con ventilación frontal. Sin embargo esta todavía dentro de los parámetros aceptables. Dos puntos extras a tomar:1.- al ser mi cpu x3d, se calienta mucho más a comparación de una versión X o non-X, si es tu caso, manejaras mejores cifras.2.- mi disipador no es el más idóneo (cooler master Evo black edition), si le instalasun Thermalright de doble torre te irá mucho mejor.Al no contar con ventilación frontal te da oportunidad de meter GPUs de 33cm o posiblemente de 34cm. Mi Sapphire pulse 7900GRE que mide 32cm entro sin problema.Si tu tarjeta micro ATX tiene la entrada pcie x16 lo suficientemente arriba para necesitar los dos brackets traseros superiores, los 2 abanicos inferiores tendrán suficiente espacio para ventilación e instalación.Algunos tips para ensamblar tu PC en este gabinete:1.- remover los abanicos superiores para conectar el cable de la CPU, te ahorraras mucho tiempo.2.- remover los dos cristales templados para poner tu motherboard y en general para toda la instalación.3.- antes de poner los abanicos inferiores en caso de... Y antes de instalar tu GPU. Conectar todos los cables de tu front panel, ya que después no tendrás espacio suficiente para manipular.
Nathan B
Comentado en los Estados Unidos el 15 de noviembre de 2024
Can't really get any better at this price. I have not built in this chassis yet, however strictly speaking in terms of build quality and looks this case is a top pick for budget MATX builders. Great cable management space, and an Included ARGB fan hub is awesome for keeping your motherboard connections clean, and even better for those who want to increase airflow in the case. The case is very lightweight, atleast with no other components a significant increase is of course expected. There are a few minor issues worth pointing out, there are definitely points in the metal panels that are thinner then other spots. Not a huge issue but if you leave this case on the floor or accidentally bang the metal a little to hard it feels like it could dent easily. The fans included seem fairly low quality and other reviews seem to back this up. I would recommend getting some cheap pwm fans to replace them, they can typically be found for 8.50-10.00$ a piece, the smallest issue I have with the case is the fact the side glass panel comes wrapped on both sides but the front panel is not, only on the outside, there seem to be minor defects on the glass that a camera wouldn't be able to capture, however there are no jarring noticeable scratches on the glass.EDIT, The building experience was immaculate. Lots of space to work with, if your Mobo has a large heatsink on the back IO your probably going to end up not being able to fill the top left 2 stand offs. I would've loved another cable cutout under the graphics card near the GPU, would've made front cable management much easier. I ended up using only one cutout for my PCIE, USB3 and 24 pin then i used the top left cutout for my cpu connectors and fans. When you undo the fan cables you realize how much of a rats nest the ARGB daisychain is in but all hidden by the side panel, I will re manage cables when my cooler and fans come in. Very visually pleasing and worth the buy
Giesy torres
Comentado en México el 29 de octubre de 2024
El espacio tan reducido hace que sea bastante dificil el ensamble, el gabinete es hermoso acabados muy bonitos, materiales le doy un 7 ...Por su precio es una opcion muy bonita.
juan carlos
Comentado en México el 21 de octubre de 2024
Muy contento con la compra
Moribund
Comentado en Canadá el 17 de octubre de 2024
The case is what I would call "DIY customization friendly" and good quality for the price. If you want to DIY install additional front bay peripherals, - like a DVD ROM and a card reader, - you certainly can. In my case I had to do it for a client. I Dremelled the front steel mesh for those, and used aluminum corners to mount both of these to the bottom. Of course, - I had to change the case's cooling scheme because of these DIY modifications (which be warned!) is a " - 3" negative pressure scheme (meaning the 3 fans are positioned to blow air OUT of the case, and air gets passively sucked in from the bottom of the case where there is a mesh. (Which makes the magnetically attached filter to the top of the case - perfectly pointless, filters belong on the bottom where the air goes in). The top filter mesh makes more sense if you choose to do what I did and convert it to +1, -2 negative pressure system (Top front fan blows air inward, the 2 others blow air out of the case, pls. see photos for clarification This is the best scheme if you want to have a large tower cooler with a fan in front. Prime95 testing confirmed this was a viable scheme with temps staying 8-10C below the CPU's TjMax at 100% CPU occupation. The fans are not particularly fast, but they are surprisingly quiet for a budget PC case.The only hiccup (you may want to be aware of) is that only after I did the aforementioned DIY modifications (thereby voiding warranty), did I realize that the fan control PCB was missing a SATA male power to SATA Female power - to 4pin ARGB power adaptor. And while it could be poor QC on company's behalf, it's also true the seller (if different from the maker company) could have checked if everything was included without voiding the warranty before submitting the PC case kits to Amazon handlers/shippers. I decided to take the stars off with seller, since doing so in both reviews would feel too vindictive. If I was somehow incorrect about this - I do hope the seller contacts me so that I would adjust the rating my reviews accordingly. Still, it wasn't cool because I had to either settle for ARGB working for just one fan (not acceptable), or purchase a pack of fans for $40 separately, which is what I did. I could have simply purchased a SATA power cable adapter but it was $26 plus shipping for anything that ships fast, and I wasn't 100% sure the native Okinos board was functional to begin with.
Dreammy Kaname
Comentado en México el 28 de septiembre de 2024
El gabinete es más pequeño de lo que uno se podría a imaginar ya que venía de un H6, midiendo este Oquinos 33.5 cm de largo x 39 de alto x 21 de ancho, la figura de una de las fotos mide 41 cm de alto y queda mas alta que el gabinete.Puede uno meter una gráfica que ocupe 2 slots de espacio de los 4 disponibles, si lo haces así podrás poner ventiladores en la parte de abajo que realmente te ayudarán a enfriar mejor el ensamble, ya que las partes malladas de abajo ayuda a qué los ventiladores de abajo de la gráfica respiren y den buen aire frio, así mismo el máximo de largo que pude medir con regla es de 32.5 cm de largo sin que golpe el vidrio lateral, podrias meter incluso una 4070ti súper de no se, AERO gigabyte que mide unos 30 cm de largo y tener un ensamble potente.Recomiendo ampliamente que pongan igual uno de los dos ventiladores de la parte de arriba metiendo y ya el segundo de arriba y el de atrás sacando aire.Mi ensamble es con una B650, un Ryzen 7600, una 4070, dos ram de 16gb cada, una fuente de poder de 750w plus gold y 5 ventiladores RGB duo de NZXT.Solo tiene dos detalles a considerar, el primero, que reemplaze los ventiladores de stock por qué realmente son la cosa más sencilla del mundo, no tienen controlador de velocidad así que siempre giran a las mismas revoluciones x minuto, si tienes la oportunidad de cambiarlos, hazlo, si no como quiera si te serviran en lo que le instalas algo mejor, y la segunda, es que en la parte donde se engancha la grafica al gabinete, los agujeros no tenian moldeado para tornillos, venia plano asi que tuve que poner un tornillo un poco mas grueso (de los que se usarían par sujetar alguna fuente de poder) para que pudiera apretar bien.Fuera de eses dos detalles, si lo que quieres es un gabinete pequeño para formato mini itx o micro atx y gráficas hasta 32 cm. Este gabinete es una opción muy bonita y se puede lograr un ensamble limpio y muy lindo.
Productos recomendados
Mex $1,174.52
Mex $ 505 .00 Mex $505.00
Mex $759.00
Mex $ 371 .00 Mex $371.00
Mex $2,138.00
Mex $ 962 .00 Mex $962.00
Mex $2,413.87
Mex $ 989 .00 Mex $989.00
Mex $751.00
Mex $ 345 .00 Mex $345.00