No hay artículos en el carro
No hay artículos en el carro
Parámetros:
- Dimensiones: 155 x 60 x 50 mm.
- Peso: 160 g.
Contenido del paquete:
- 1 selector de audio XLR (cable de audio no incluido).
Parttake
Comentado en el Reino Unido el 18 de octubre de 2024
It has proven to be an excellent solution by allowing me to connect a balanced pre-amp, dac and dap to my Fosi v3 monoblock amps without any loss of sound quality.Also there's no noise or switching thumps through my speakers.It's robust, of mostly metal construction, suggesting it will be reliable and long lasting.It's not cheap but it's worth it. Recommended
Simon Hawk
Comentado en los Estados Unidos el 15 de abril de 2023
I didn't this this through properly. When using this switcher in a 1 (DAC) in and 3 (AMP) out you will probably either have to get some adapters to change the gender of the connections or change your cables. I used CableCreation 2-Pair XLR Male to Male & XLR Female to Female 3PIN Adapter Connector to get my configuration to work. Once it was all connected and working this unit worked as expected with no signal bleed between the interfaces. A good little switch box.
edgar69
Comentado en los Estados Unidos el 23 de agosto de 2020
i am using this to switch between three inputs feeding a tube amp. It works well, no noise added to the signal. xlr switches are not common and this one is a great deal.
Customer
Comentado en los Estados Unidos el 7 de marzo de 2020
I bought this to allow the switching between a Fractal AxeFX3 and a Kemper Profiler using one set of Freidman ASM-12 powered wedges. I was expecting the possibility of ground loop noise. There is none. Well designed and well built, sits on my studio desk and allows me the most flexibility with the least recabling. Recommended
five-by-five
Comentado en los Estados Unidos el 19 de diciembre de 2018
I have a home recording studio with a single pair of monitors and two audio interfaces. This switch allows me to monitor either source. The box is solidly built with a smooth, professional looking fit and finish. The selector is very high grade with good resistance and firm detents that should prevent unintentional movement. Switching between sources produces a mild pop on my system as expected. The connectors are Neutrik with locking inputs. The labels are precisely applied and easy to read. They don't look like they will flake or peel. The box is small enough to place anywhere on my desk so that is in easy reach, but large enough so there plenty of room to operate the switch while connected. Having the selector knob on the front of the unit allows me to mount it under my desk using some strong double-sided tape or velcro. The only negative is that you will need gender inverters to use is as a 1:3.I found only a couple of similar devices online, Hosa Audio Switcher, and the Coleman Audio LS3 Line Selector. (I've not tested either in person.) The Hosa is around $80. The Coleman is about $120. They use TRS connectors which means you don't need gender inverters to use them as a 1:3. Three inverters will cost about $30-$40. Even with that extra cost, this unit, at $50, is a much better option based on its features, components, and build quality,
Productos recomendados
Mex $8,481.51
Mex $ 1,881 .00 Mex $1,881.00
Mex $544.26
Mex $ 255 .00 Mex $255.00
Mex $390.00
Mex $ 210 .00 Mex $210.00
Mex $612.16
Mex $ 275 .00 Mex $275.00
Mex $1,195.19
Mex $ 490 .00 Mex $490.00