Excelente producto lo recomiendo, muy buen material premium

Todo super bien. El tripié es súper estáble y los materiales son todos metálicos. Me encantaría que fuese un poco más ligero para poderlo llevar en la bolsa de mi pantalón, pero no importa. Excelente producto!!!

Lo que no me agrado de este trípode es su peso definitivamente espera mejor peso evidentemente menos peso también habría impactado en la estabilidad, se siente bien es muuuy resistente y compacto lo recomiendo ampliamente solo elTema del peso no me convence

Esta bien hecho, pero un poquito chueco, pero nada que afecte el uso. Por eso 4 estrellas, no es perfecto.

Me ha sorprendido este pequeño trípode, por su acertada fabricación metálica (se nota en el peso), el buen acabado y pensado diseño, como el uso variado que se le puede dar a este buen precio. Lo he usado principalmente en exterior (donde le he encontrado alguna limitación), incluso lo he situado dentro del agua, se muestra estable, resistente y mantiene un buen aspecto. Gracias a que incluye cabezal resuelve muy bien diferentes situaciones que se me han dado. Sería muy interesante pensar en una versión con bloqueo independiente de cada pata a diferentes alturas, para absorber desniveles y posiciones limite. He probado a colocarlas a diferentes alturas sin bloqueo y no muestra ningún problema aparente estabilidad, ni de movimiento en las fotos, el peso del equipo superior a 2Kg entre cámara y un teleobjetivo medio. Me está resultando muy válido y un buen todo terreno, es un útil fijo en mi mochila. Espero poder ver una versión rediseñada todoterreno, para poder darle un 5 en versatilidad.

Rly good. Would not disregard the claims on the product description.

Calidad de la mejor, muy solido!, gran capacidad de carga !

es totalmente metálico y muy resistente, muy estable para grandes pesos y muy versátil, yo lo uso como "culata" para estabilizar mi foto

As much as I like my Fotobetter LBH-25 ball head, a compact ball head clone of a similar RRS ball head, I decided I'd like another but slightly larger one for use as a head for my Bogen monopod. But, nothing larger from Fotobetter was to be found, and the Neewer compact ball head was the closest affordable alternative I could find. But, when I saw the ball head was available as this tabletop tripod for only $8 more, the decision to get the combo was a no-brainer and I'm so very happy with the purchase. I have several Oben TT-100 tabletop tripods with an even smaller ball head that I use for lighting, clamps, smaller/lighter cameras, etc. and find them extremely handy, so buying something a bit more robust that might work with my heavier Nikon D850 DSLR seemed like it should also be very handy.This tripod is solid! And the strength of the ball head is excellent for its size. I very much like the two-position height adjustment of the tripod for a bit added versatility, opting for the low position if the greatest stability is desired. The ball head, being a single lever design is not so much designed for panning since releasing the lever enough to pan also reduces grip on the ball and thus the camera position, but I expected that so no problem there. The important thing was the holding power of the ball head and with 11.4 lbs. of camera, lens, gimbal, and QR plates configured and mounted on it, it held! The caveat there is that was with the gimbal mounted in an upright position as it is intended to be used, given that gimbal heads are more commonly used as a direct head replacement. But, I put a QR plate on my gimbal for speed of interchangeability, so the weight it contributes to the overall package is going to give a ball head a good test, and this one passed. If I deliberately tilt the gimbal off center, the ball head will only hold the total weight if the ball head is strongly locked down with the lever....and that is possible, but just not how I'd typically use a ball head. Take off the gimbal/plate and the package drops to 9 pounds which with use of the lens plate for mounting with a better center of gravity, finds the ball head easily secures the camera and lens at any angle with a more typical "firm tightening" of the clamping lever.So, overall I have nothing but praise for this relatively light, compact tabletop tripod & ball head. The aesthetics of it are nice too, and although no straps are provided for use with the slotted legs, at least the slots are there to extend the versatility in how the tripod might be used or secured, while 1/4-20 threaded holes accommodate mounting small accessories on the legs. The tripod is easily, easily worth the added cost over the ball head alone. As I wrap this up, I realized I should remove the QR plate from my Neewer gimbal and mount it directly to the tripod...sure enough, another excellent combination. In general, I'd be using the gimbal on a larger tripod, but for anyone who may be able to take advantage of a gimbal yet needs a low profile support, this tripod looks as though it should work wonderfully, as long as you don't need adjustable legs to accommodate uneven surfaces.Great bang for the buck!

Material resistente, soporta una Nikon D7100 con un lente 50mm sin problema. Tiene solo 2 Alturas. Me gustó mucho y por el precio, en mi opinión los vale.

Mini-trípode de buen material y se ve que es resistente, pues es de metal y no de plástico, además que tiene burbuja para nivelar y eso es un plus para un trípode pequeño. Soporta bien el peso de las cámaras bridge y compactas. No puedo opinar sobre las reflex (que son más pesadas), pues no cuento con una. Fácil de transportar pues su tamaño es compacto y cabe en bolsas o mochilas pequeñas.

Rigide et ne bouge pas quand on met 2kg dessus, contrairement a des modèle plus cher avec des éléments en plastique.Un peu lourd mais solide au moins

A fairly comprehensive review so if you want the short answer: Yes, this tripod is great. Yes you should buy it if you need just a tripod head or a small tripod.The entire tripod has a nice solid weight to it, it easily holds upwards of 4-5kg just fine. The entire tripod is metal. I mean everything, the knobs, the dial, the mounting plate! There isnt a single bit of it thats plastic, making the entire thing feel very premium. The powder coated finish gives it a great matte texture, overal it feels very durable and I have no doubt it wouldnt wear down over time.The tripod head is high quality, its better than many higher priced tripod heads, making it worth purchasing the entire tripod for the head alone. It turns side to side very smoothly with no noticeable inconsistency. The ball is metal as well, and there is more than adequate range in adjusting the tightness. The tightening screw/knob is internally oiled,extremely smooth and gives very fine control.The legs have two positions only as described but I found that the tightness can be adjusted with the included allen key and you can keep it in any position if you adjust the screws/tightness as long as you dont have anything too heavy on it.The only issue I had is that my mounting plate had rubber on the top that wasnt properly cut to size, but this was an easy fix with an exacto knife.