No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Simple y fácil de usar
- Diseño elegante: se ve genial en cualquier lugar
- Ocupa un espacio mínimo
- Ideal para cualquier habitación de la casa
- Requiere instalación
- No es compatible con Google Nest Hub Gen 1
Mount Genie Simple Soporte de pared integrado para Google Nest Hub Gen 2
[Haz que tu hogar inteligente sea desordenado]
Mount Genie Simple Montaje de pared integrado para Google Nest Hub Gen 2 es una manera simple y económica de obtener una visualización inteligente Nest/Google montado en tu hogar u oficina sin cables visibles.
¿Por qué el soporte de pared integrado para Google Nest Hub Gen 2 es el mejor?
Viene con un cable de extensión de 10 pies que permite muchas opciones de montaje diferentes. Funciona bien con el adaptador de divisor PoE Mount Genie Expuesto para un gran sonidoSe coloca casi al ras de la pared
Pascal
Comentado en Alemania el 26 de marzo de 2025
Hält so gerade eben in der fassung
Priesty
Comentado en Australia el 13 de enero de 2024
Little overpriced for a piece of plastic but is much nicer than having the device sitting on the bench.
wmg
Comentado en los Estados Unidos el 11 de mayo de 2023
This is a great mount and easy to install. Gives the Best Hub a built in wall look. Customer service is great as well.
7
Comentado en Canadá el 10 de junio de 2022
TL;DR: Great mount, does exactly what it says and looks clean. Only difference between what I received and what was pictured was the MOUNTgenie branding that wasn't in the listing's product photos.I happened upon this listing accidentally, but I'm very glad I did. I'm very happy with the way this turned out and looks. I had my Hub sitting on my kitchen countertop previously and it kind of added a bit of clutter. Raising it and mounting it into the wall has made for a very clean look.Installation was pretty easy – use a stud-finder to make sure you've got a clear location for the cut-out, use a level with the template to make sure it's straight, trace the template, then cut it out of the wall. I had intended to keep the drywall cut-out for easier patching down the road, but mine fell into the wall (heads up) – whoops. I also dropped one of the metal clips into the wall during installation as well, but it's holding very firm with 3. Fairly straightforward all around.I didn't want to create a new electrical outlet in the wall, so I just used a small cord grommet near the existing exterior outlet and ran the power cable through it. Looks pretty clean for my tastes.I didn't need velcro or anything some of the other reviewers had mentioned, but I could see the potential need to use something to affix the Hub to the mount if you were going to handling it frequently (to tap the screen or adjust the volume manually, etc) – the Hub is placed into the mount and is perfectly sturdy, but it's not held there by anything other than gravity, so it will move when you touch it. This shouldn't be a problem for the majority of people, I expect.Very happy with my purchase and the end result – I would recommend it.
jorge
Comentado en los Estados Unidos el 9 de agosto de 2021
Im in no way handy with tools so was hesitant to buy this having to cut a hole in the wall. Finally amped myself to do it. Ordered a drywall cutter traced the outliner of the holder that is provided. Got to cutting less than 10min and it was done. I did have issues with getting power to it but I whipped up something. Basically I made an extra hole bottom near the floor and passed the power cable through tied with a metal hair clip. Then I put a magnet through the hole that was made for the mount and started fishing. 5 minutes later I was able to get the metal with the magnet and pulled it out. Then tada it works. I did mess up by not using a stud finder because I made a hole and stud was there right down the middle. So the hub couldn't sit in. So yeah I bought a hole patch (a new experience for me as well) got the wall patched then retired now knowing where the stud was and all done ✅ looks great👍 very happy with it. All this took (including patching the first hole) 35 minutes
Productos recomendados
Mex $1,157.99
Mex $ 532 .00 Mex $532.00
Mex $871.77
Mex $ 453 .00 Mex $453.00
Mex $219.74
Mex $ 127 .00 Mex $127.00