Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Montura para Starlink Mini, Soporte de Escalera y Poste, Acero Inoxidable y Aluminio, Montaje en Escaleras o Postes, Color Acero

Envío gratis en pedidos superiores a Mex $600.00

Mex $510.99

Mex $ 229 .00 Mex $229.00

En stock

1.Modelo:Starlink Mini Adapter Mount


Acerca de este artículo

  • Diseño versátil de montaje: específicamente diseñado para el Starlink Mini, equipado con una abrazadera de tubo de acero inoxidable y poste, se monta de forma segura en escaleras o postes que van de 0.9 a 1.1 pulgadas, adecuado para varios escenarios como RV, poste, portaequipajes, yates, caravanas y camping.
  • No se desliza: esta abrazadera de poste de montaje Starlink Mini está hecha de dos abrazaderas de aleación de aluminio de alta resistencia, diseñada con doble protección contra resbalones accidentales o aflojamientos, viene con una almohadilla de goma para crear una superficie antideslizante que también evita arañazos, asegurando mantener de forma segura tu Starlink Mini resistente y segura incluso en condiciones climáticas adversas.
  • El tubo de acero inoxidable está hecho de acero inoxidable de alta calidad, que es anticorrosivo y a prueba de humedad antioxidante. No se oxida cuando se utiliza al aire última intervensión durante mucho tiempo. Incluso en climas fuertes de viento, lluvia y nieve, puede garantizar estabilidad y una fuerte capacidad de carga. El diseño de fijación de doble tornillo permite que el poste entre perfectamente en contacto con el enchufe, y que también permite que el adaptador se fije de forma segura a un poste o tubería.
  • Diseño específico: el palo de TPU puede proteger el poste de arañazos por tornillos. Mientras tanto, hace que el poste sea más friccional y más apretado con el enchufe, lo que garantiza que tu Starlink Mini permanezca firmemente asegurado al poste.
  • El paquete incluye: 1 tubo de acero inoxidable, 1 abrazadera de poste de aleación de aluminio, 1 almohadilla de silicona, 1 almohadilla de TPU, 1 llave tipo Z, 1 manual


El paquete incluye: 1 tubo de acero inoxidable, 1 abrazadera de poste de aleación de aluminio, 1 almohadilla de silicona, 1 almohadilla de TPU, 1 llave tipo Z, 1 manual


joann binkley
Comentado en los Estados Unidos el 12 de marzo de 2025
My husband says he highly recommends. This clamp great price. Great fit.
Steven M White
Comentado en los Estados Unidos el 9 de enero de 2025
Bought this hoping it would work, but I can't see how they they expect this to work with most gutters due to the tiny screws they provide as the means to clamp it to the gutter. My gutters also have a slight angle to them so the little screws just couldn't get a bite on the gutter. I also tried using a piece of scrap wood to fill the gap with similar results. These may work fine if you have a totally flat mounting surface.
Gearz
Comentado en los Estados Unidos el 19 de diciembre de 2024
Got this as a way to mount the Starlink Mini to my rack and camper. While I also have a need to mount it to a telescopic stand it just doesn't seem to tighten down enough by hand to really make it worthy of 5 stars.I will say that it is robust and I had an event where I was sure it would have failed but all it did was flop the Mini on the less than solid ball joints. It was run up high on a solid telescopic and heavy duty light stand and was toppled by a gust of wind. The Mini was about 12 feet in the air and the pole fell coming to rest on the neighbor's fence. The mount held onto the Mini and saved it from hitting the ground and crushing my wallet!Pros:* Clamp fits the pipe I have to attach it to.* The part that fits into the Starlink Mini mount is well made and robust* Overall it is small in size and made of quality materialCons:* The ball socket clamp is not very secure. It takes a lot of force to get the clamp to hold the joints and even as tight as I can make it by hand it still allows the Mini to be moved.In summary:I will keep using this mount as I understand its limitations. Don't use it on a moving vehicle and be aware that the ball joints do not tighten down very well. If you don't mind occasionally checking on it and tightening it with a tool (I never tried this) then you might get the mount to be super solid. I didn't want to risk breaking it and don't feel that joints like this should need tools to get them sufficiently tight. Not sure if it is the clamping part or the balls that are at fault but it shouldn't be difficult to make this mount really solid with the right parts.UPDATEOn a whim I ordered a Ram brand clamp and it tightens down solidly. The clamp the comes with this kit has a design flaw that limits the amount of clamping force but the ball ends will fit in a B sized Ram clamp and work perfectly.
TheReview
Comentado en los Estados Unidos el 25 de noviembre de 2024
I got this so that I could mount my Starlink Mini on my trailer ladder. For best results, the Starlink Mini needs to be properly oriented and this helps with that. I have found in the past that some of these adapters do not fit well into the OEM Starlink mounts. This one does fit perfectly.The round adapter puck fits into the Starlink frame perfectly. It is not too tight that it gets stuck, nor is it loose fitting. The clamp fits onto my RV ladder just fine. I like that this adapter allows for the full rotation of the dish. It also allows for easy adjustment of the orientation angle.
Perry
Comentado en los Estados Unidos el 2 de septiembre de 2024
It looks great, but it will not fit the roof rail.I should have read the description.
Productos recomendados