Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Moen 1222 Cartucho de refacción con diseño exclusivo Moen, para mezcladoras de regadera y tina con válvula PosiTemp

Envío gratis en pedidos superiores a Mex $600.00

Mex $861.29

Mex $ 439 .00 Mex $439.00

En stock

1.Color:Standard


Acerca de este artículo

  • Fácil de usar


La llave de la llave del cartucho de Moen ofrece un servicio rápido y sin complicaciones de repuesto para la boca de la llave de la ducha y las configuraciones de sólo ducha. El sistema de válvula positiva mantiene constante el agua a presión y temperatura mientras que las duchas. Este cartucho de papel resistente al latón y al plástico se instala fácilmente para resolver problemas con grifos positivos en bañeras y duchas.


Henry Lyon
Comentado en los Estados Unidos el 19 de marzo de 2025
OEM Moen factory part. Fixed problem and no more leaking. Was easy to install but watch on line video first.
Omar R.
Comentado en México el 22 de agosto de 2024
El empaque venía abierto y maltratado, el cartucho tiene muestras de haber sido utilizado previamente.Pésima experiencia. Devolución en proceso.
John Walko
Comentado en los Estados Unidos el 22 de agosto de 2024
My old MOEN shower valve started to become very difficult to turn off. We have hard water, so I suspect calcium buildup. I suspect that if I didn't replace it, it would either begin to leak or stop working altogether. I was concerned about ordering a replacement because I read all the reviews of people buying aftermarket replacements that didn't fit or started leaking soon after installation. So I was looking for a brand name replacement. This one was a little more expensive than the no-name aftermarket parts, but worth it.Removal of the old one was quite difficult. It seemed stuck in place. You have to spin the old valve 45 degrees to remove it. I was glad ai also purchased the removal tool. I had to use channel lock pliers to twist it back and forth when removing to get it to come out of the valve body. When I took the old one out, the rubber crumbled. It appears it had hardened from years of use and I think it was difficult to remove because the rubber gasket was stuck inside the channels inside the valve body. Once I was able to get the old one out, I cleaned up the inside of the valve body using an acidic shower cleaner to remove any calcium and lime build up.Installing the new one was fairly easy. I used the included silicon lubricant packet and applied it to the new valve and also around the interior of the valve body. Installing the new one required a bit of light tapping with a hammer (do not tap on the brass stem - there is a plastic piece included that fits over the brass stem and rests against the plastic body of the valve - I was able to make a wood tap block by drilling out a hole for the brass stem). I lightly tapped on the valve body to set it and reinstalled the retaining clip.The only issue I had was that the instructions were unclear as to the position of the brass stem. The first time I installed it, it was upside down (reversed 180 degrees), which means the shower was running when I turned the water back on. It was a simple thing to spin it 180 degrees to make it operate properly. I'm very happy with the quality of the replacement and it works 100% as designed. Now my shower is easy to operate and is no longer difficult to turn off.
Farmerguy
Comentado en Canadá el 7 de octubre de 2024
It installed as it should, and its been working perfectly for at least a year. No problems.
Vanessa X
Comentado en Brasil el 6 de febrero de 2023
Encontrei aqui na Amazon o produto que tanto procurei, fiquei aflita com o prazo estimado de entrega por conta que precisava mesmo, porém, me surpreendi com a agilidade da entrega antes do prazo! Nota 1000!! Obrigada.
JD
Comentado en Canadá el 12 de noviembre de 2022
Highly suggest to go with Moen. Product is excellent and shipping was very fast. The price you can’t beat. I originally tried a different brand of the 1222 cartridge and that was a big mistake. It made a weird noise when running and you could feel toughness in turn. This product by Moan was easy to install, no leaks, and extremely smooth to turn. Top of the line product. It also comes with grease. I would suggest to buy a cartridge remover as it helps more ways than one with removal and installation.Install tip that worked for me:I initially had a tough time installing any brand of cartridge due to air tight or suction. I could not get that last little bit in to install clip. I found if you had a bit of water run it would slide right in with no problems. Take your time.
Luis fer eco
Comentado en México el 10 de julio de 2021
Es muy delicado en general esta pieza de Moen, la leída esta bien pero les recomiendo tener mucho cuidado en su operación
Esben S.
Comentado en México el 7 de noviembre de 2021
Dejo de funcionar después de un mes, tira agua en todas las posiciones de la valvula
Juan L.
Comentado en México el 24 de julio de 2020
Excelente
RUBEN
Comentado en México el 18 de abril de 2019
Justo como lo necesits
Productos recomendados

Mex $1,419.78

Mex $ 653 .00 Mex $653.00

4.7
Elegir