No hay artículos en el carro
No hay artículos en el carroAXHL-DR09-PARENT
Christopher David Foxen
Comentado en los Estados Unidos el 23 de septiembre de 2024
Great headlight.driverside got busted need to replace.
Alexander
Comentado en los Estados Unidos el 14 de junio de 2021
I have a 2011 Dodge Ram 2500,I bought adapter/headlight socket at Napa auto parts for a 2013 Dodge Ram headlight (around $8 per side) took the wires out from my 2011 (they are on clips,easy to remove) then just put the wires back on the new plug in the same order (there are 3 wires) no cutting/splicing or resisters needed and the work flawlessly. Also installed a h7 hid kit from Amazon with the canbus resisters.didn’t install the DRL wires since I don’t want the lights always on when my truck is started and everything work how it should. Also ran a bead of black silicone once I made sure the lights worked just to be sure I wouldn’t get condensation. And after driving in rain and washing my truck I have no issues.
Robert Bishop
Comentado en los Estados Unidos el 22 de abril de 2021
The lights look great and are a VAST improvement over the OEM quad lights as far as lighting up the road ahead goes. No headlight on a RAM is an easy install due to THE RAM's design. But swapping these out is no harder than changing a bulb in the OEM lights. The projectors cast light way down the road and I have found little need for my bright lights. The DRLs are bright enough to almost act as headlights themselves. The one drawback is, if you decide to upgrade the bulbs in the projectors from the ones they provide, take note as to which way the tab on the bulb is. Mine did not have any notches or indicators as to which way the bulb should be turned and there is no rhyme or reason to how they're turned, but it DOES MATTER. it took a bit of trial and error to get that nice, neat, termination line, but once it was set and the lights aimed properly it was well worth it. Aiming the lights is easy. Once you have the housings installed back into the body all it takes is a 6" phillips screwdriver. (Mine did not have the torx screw like the instruction video claimed or the OEM lights had) All mine required was said phillips screwdriver through the light adjustment hole in the fenders. I am very happy with this puchase so far.
Elijah Kinlichiinii
Comentado en los Estados Unidos el 13 de agosto de 2020
UPDATE: Christmas 2020, no reply from seller about the issue with the ground burning out my harness. I had installed new wiring harnesses for both the headlight and the connector for the vehicle.First off the lights make my truck look awesome. It's been about a month owning and we've seen rain and hot days and there haven't been any condensation in the lens as I've seen some posts state. The beginning of August (last week) I kept getting a headlight out message on my dash and I took it apart thinking the bulb died but they were fine. I then plug them back in and try to get the lights going again but to no avail. I check the wiring and the harness and that's where I saw the harness had been melted in the middle connector. Following the wiring back I didn't see any wires rubbing it anywhere. As of now I have only one working light, gonna hopefully get ahold of the seller.
aMaZoM cUsToMeR
Comentado en los Estados Unidos el 7 de noviembre de 2020
Adjustment Note: I recommend adjusting while your installing or using a long T35 torx screw driver to turn the adjustment wheel. Just rmember Left is lower, right is Higher (this is when your looking at the back of the headlamp).Overall, very nice headlights. I do how ever have an issue with one, the drivers side headlamp dose have condensation and it has a small pice of something within the housing it self that moves around (it is there some times ther times its not). Also, the DRL's are a whitesh blue and dim down when you have the parking lights or the lights on. Now this is not an issue but those that know what the OEM ones look like can tell the difference as the OEM illuminate amber.But they are a good pair of headlights for the money, but being aftermarket (generally) its not going to be as high quality or as expensive as OEM. Personally I would stil buy them if you want to something to add a little more flair to your truck, as I see many rams with the basic quad headlight, but not many with the projector style other than the Sport or the Laramine.
Productos recomendados
Mex $2,390.00
Mex $ 1,195 .00 Mex $1,195.00
Mex $1,338.26
Mex $ 655 .00 Mex $655.00
Mex $3,909.37
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,372.02
Mex $ 1,067 .00 Mex $1,067.00
Mex $516.96
Mex $ 268 .00 Mex $268.00