No hay artículos en el carro
No hay artículos en el carroJames E Barnes
Comentado en los Estados Unidos el 4 de diciembre de 2024
Does the job. Great little hobby sander. I build wooden toys and this is great for the hard to get spots
Kenneth P. Mostello
Comentado en los Estados Unidos el 31 de diciembre de 2024
This is an indispensable tool for intricate sanding but the sandpaper grits available are limited and they wear out rapidly. Expect to spend as much time swapping sandpaper as you do sanding.
EBM INDUSTRIA
Comentado en los Estados Unidos el 17 de diciembre de 2024
I love this sander! This sander has saved so much aggrivation when doing intricate work. I use this on my model kits from plastic to resin. I even use it when making clay sculptures ( dry of corse ). This sander is very light and easy to use. I'm sure that some of us like to sand in tight corners. A little tip, If using the edge on the sander attachment ( not the whole flat face ) and if the sandpaper loads up. Don't dispose of the sandpaper. Just peel the sandpaper off the attachment and turn it around. The PSA still has plenty of stickiness to re-apply back on. I find myself using this sander alot.The only cons I found is the grit markings on the sandpaper sheets to identify. I wish the grit identification was printed on the actual back of the sheet. Not underneath the PSA of the sandpaper. There are numbers there but, still hard to tell.
Mario Romero
Comentado en México el 7 de septiembre de 2024
Se nota la calidad del producto desde el momento en que se presenta el empaque. La lijadora cumple magníficamente con lo prometido, como modelista me ha ahorrado varias horas de penosa labor lijando uniones y desbastando plástico o resina excedentes. ¡Esta es una lijadora para detalles! No está orientada para ser usada por periodos largos de tiempo en superficies extensas. Si cuesta un poco más que otras opciones, pero prefiero pagar por calidad en lugar de cantidad.
Lou Shoes
Comentado en los Estados Unidos el 24 de septiembre de 2024
I was watching one of the YouTube scale modelers that make the model cars that are hard to tell from the real thing and noticed that he used one of theses sanders. I saw the ease in which he was able to sand tiny delicate plastic pieces as well as the whole model body. I had to have one too!!After some shopping around I decided on the MicroLux Micro Sander based on the excellent reputation of Micro Mark and the MicroLux brand. I also preferred the AC plug in model over the rechargeable type. I believe a plug in tool always has more power and certainly more staying power than a cordless.This tool comes with three sheets of "peel & stick" sandpaper in three grits from 180, 240, & 400, pre-cut for the various shape sander head that come with it. I have only used the 400 from this assortment but found it to perform perfectly....expecially on the little triangle shape head. It will sand in tight spots where getting in with a sanding stick or paper and a finger would be impossible. For finer grits of sanding I use either Tamiya foam back or 3M Trizact in grits up to 5000 for fine finish sanding. I use double sided sticky tape..https://www.amazon.com/dp/B0CTKQ4NLL?ref=ppx_yo2ov_dt_b_fed_asin_title to attach sandpaper and foam to the sander head....works great. No need to write negative review because your sandpaper wore out too fast....I mean come on.
Bradley
Comentado en los Estados Unidos el 13 de marzo de 2023
There’s a reason there aren’t more options out for something like this & it’s because with such a small amount of abrasive media, it’s either going to clog or wear out very quickly due to the short stroke of the tool. Just like an oscillating multi tool bit, where you’ll wear the teeth out in the middle very quickly, the same applies here. Also the arm pivots at the tools attachment point then extends out towards the surface where you put the abrasive so it’s not going to contact the surface of what you’re sanding uniformly or in a flat manner, it’s going to hit the edges mostly. If you’re strugling to understand what I’m trying to illustrate, think of a pendulum swinging back and forth and that’s how it works.
vicky
Comentado en México el 26 de enero de 2022
Lo que necesito para modelos de barcos de madera.Las piezas las sujeto con pinzas y paso la lijadora muy suave ya que son piezas pequeñas.Funciona de maravilla.
Productos recomendados