No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Núcleo de aleación de cobre: rendimiento térmico superior
El núcleo de la boquilla está hecho de cobre y cromo circonio de alta temperatura y chapado con un niquelado sin electrodo. Esta aleación especial mantiene su resistencia a temperaturas mucho más altas en comparación con una aleación de cobre normal. La aleación de cobre ofrece una de las mejores conductividad térmica, lo que significa que ahora puedes imprimir filamentos abrasivos a temperaturas normales de la boquilla.
Inserto de acero endurecido de alta velocidad M2, resistencia al desgaste excepcional
Dureza tratada térmicamente: 68 HRC chapado con un chapado de níquel no electrolítico recubierto con revestimiento antiadherente nano WS2. Coeficiente de fricción: 0.035
La boquilla Micro Swiss CM2 funciona con la mayoría de materiales de impresión FDM como PLA/ABS/PETG/TPU básicos para el filamento más abrasivo como fibra de carbono, fibra de vidrio, carburo de tungsteno y brilla en la oscuridad.
Revestimiento y revestimiento nano WS2 - Superficie antiadherente
El cuerpo de cobre está chapado con un chapado en níquel electrolítico. El inserto de acero endurecido está chapado con un chapado de níquel electrolítico y recubierto con revestimiento antiadherente Nano WS2. WS2 es un revestimiento lubricante seco de baja fricción que ayuda a mantener la punta de la boquilla limpia y evita la acumulación de material. Este revestimiento proporciona un coeficiente de fricción muy bajo (0.035) que ayuda al filamento a fluir suavemente a través de la boquilla.
Compatible con:
Anycubic KobraAnycubic Kobra MaxAnycubic Kobra PlusAnycubic VyperArtillery Genius ProArtillery Sidewinder X1, X2Volcano HotEnd 1.75mm FilamentFLSUN Super RacerFOKOOS Odin-5 F3Lulzbot TAZ MOARstruderTevo Little Monster
Pavel
Comentado en Canadá el 27 de junio de 2024
Well made, a precise nozzle, but it went out just in one month.Not sure how long it should work for that money, but I expected it to work longer. So, it's a good nozzle, but just don't expect too much from this thing.
Volker Holzmann
Comentado en Alemania el 23 de diciembre de 2024
Ich drucke sehr viel, vorallem auch Faserverstärktes Material. Diese Nozze ist echt extrem gut. Durch den Kupferkern und den recht kleinen gehärtetem Einsatzban der Spitze, kann ich auch für für nicht CF Filamente meine gewohnten Einstellungen nehmen. Macht das Leben um vieles Einfacher.
Jack Light
Comentado en los Estados Unidos el 17 de diciembre de 2023
I have an FLSUN v400 and this has so far been a huge upgrade over the stock nozzle. Filament hasn’t been sticking to it like the stock brass one and heats very well. Have not had to change any temperature settings in my profiles for PLA, PETG or TPU, installed, reset Z offset and away she went printing better than before! Highly recommend this nozzle based off first impressions, fit and function.
SocKeTPupPet 🤖
Comentado en los Estados Unidos el 19 de noviembre de 2023
I've always been 100% satisfied with Micro Swiss' products, from their extruders and hotends for our Creality / Ender series upgrades. This volcano nozzle did not disappoint and dropped in perfectly on my highly modified Fokoos Odin 5, which was already equipped with a ruby nozzle and copper heating block. This is a production printer used in a design studio for small and fast prints and mostly prints highly abrasive carbon fiber filaments for prototyping functional parts in-house. The ruby tipped nozzle has always performed well, but the similar cost and USA made precision of MS products had me curious, so in this went.Extrusion was on part with the brass and plated copper nozzle I've used before. These two materials just flow better, especially the copper one. Noticeable different than the ruby tipped variant, as I'm starting to believe the ruby may be wear resistant, but doesn't allow the molten filament to flow quite like the copper/ brass, as I've noticed when pushing the printer above 100mm/s wall speeds. The MS CM2 has brought this speed back after a PID tune and several tests of the same filaments that this printer uses exclusively. So far, impressed and hoping the combination of copper and hardened steel will last awhile living life at 260-280C and constantly eating up abrasive CF filaments.
Gregory S.
Comentado en los Estados Unidos el 14 de noviembre de 2023
I recently upgraded my 3D printer with the Micro Swiss CM2 HighFlow Volcano 1.75 Nozzle, compatible with Artillery Sidewinder, Anycubic, and FLSUN, and paired it with an E3D Volcano setup. The results have been nothing short of phenomenal, and here's why I think this nozzle is a must-have for any 3D printing enthusiast:Superior Compatibility: The Micro Swiss CM2 nozzle's compatibility with popular 3D printers like the Artillery Sidewinder, Anycubic, and FLSUN is a huge plus. This versatility makes it an excellent choice for a wide range of 3D printing enthusiasts.Exceptional Print Quality: Since installing this nozzle, I've noticed a significant improvement in print quality. The nozzle facilitates smooth filament flow, resulting in cleaner, more precise prints. The level of detail it can achieve is impressive, even with more complex designs.High-Flow Capability: The high-flow design is perfect for projects requiring faster print times without sacrificing quality. This feature is especially beneficial when working on larger prints, as it significantly reduces the overall printing time.Enhanced Durability: Made from high-quality materials, this nozzle has proven to be incredibly durable. It withstands high temperatures and continuous use without any degradation in performance, which is crucial for heavy printing sessions.Easy Installation and Compatibility with E3D Volcano: The nozzle was a breeze to install, and its compatibility with the E3D Volcano setup is a huge advantage. It seamlessly integrated into my existing setup, and the improvement in performance was noticeable right from the first print.Reduced Clogging: One of the standout features is its resistance to clogging. This reliability ensures uninterrupted printing sessions, saving time and reducing the hassle of frequent maintenance.Versatile for Various Filaments: Whether I'm working with standard PLA or more specialized materials, this nozzle handles them all with ease. Its versatility in accommodating different filaments adds to its appeal.In conclusion, the Micro Swiss CM2 HighFlow Volcano 1.75 Nozzle is an exceptional upgrade for any compatible 3D printer. Its compatibility with the E3D Volcano, combined with its high-flow design, durability, and superb print quality, makes it a top choice for both hobbyists and professionals. If you're looking to enhance your 3D printing experience, this nozzle is definitely worth considering. Highly recommended!
Productos recomendados
Mex $660.41
Mex $ 330 .00 Mex $330.00