Haven’t used in a performance setting but tested and seems to work great for price point!!

Cómo se carga la batería? Ya hice todos los pasos y no puedo vincular el receptor al transmisor 😓

Lo devolví porque llegó solo el receptor y unos cables, faltaba el micrófono y el eliminador de corriente del receptor.

Very clear microphone. Just a little bulky.

Needed a second wireless and did not want to kick out $450 for another Shure BLX set. I saw the positive reviews of the SGPRO and figured it would be at least worth checking out. Upon receiving I was impressed with the build quality, metal housing was not expected. The mic/transmitter has more plastic parts but still well built. Have used it on 3 shows ( 1 was actually on trpt ) and sound quality, no noise, plenty of gain, all excellent. Battery life on the transmitter lasts the entire gig and love that there is a USB port on the back of the receiver so you always have a place to recharge mic in between sets if needed and I even use it to charge my ph/ipad. I have not dug into the settings for echo/delay or the adjustable EQ as the sound man handles that but in smaller settings doing our own sound this would be a nice feature. Give SGPRO a shot I think you will be pleasantly surprised as I was.

La verdad es muy bueno, solo que el micro deja que desear en sus materiales por ser de plástico, siento que no aguantaría una caída.

No se pudo cargar el contenido.

Me gustó, porque tiene manera de ponerle efecto, modificar los rangos graves, agudos, es un plus eso que tiene el aparato, lo que es adicional al efecto que le puedas poner en la mezcladora. Tiene muy buen alcance, no se distorsiona la señal. De lo que me llamó la atención es que debes de subirle muy poco al volumen al aparato, y si te lo explica eso el instructivo. Lo que no se, es cuánto me va a durar la batería, y si la voy a poder cambiar, porque esta integrada al micrófono y lo cargas directamente del receptor, pero bueno, ya veré como solucionar eso. Lo uso para saxofón, sin música, al mover las llaves sí se transmite un poco el ruido, pero no es nada grave ni malo, ya con la música no se notan esos ruidos.

Bought this in August 2022. Comes with good manual, and a Lapel mic, which I won't be using. Very light weight transmitter and mic. I don't even notice that it is on my sax. The system adds a generous amount of compression / limiter, however, I think this will be an asset on my loud stage. Minimal key thumping! The mic evens rejects nearby sounds, such as my voice when I am not playing the sax. The changes are made with a tiny screen that reminds me of early 90's tech - push to enter, turn to select. Don't go too slow or it will lock the screen and you have to start over. I only spent a minute trying to hear the on-board echo feature, did not understand it. No worries, I want my sound man to provide EQ and Efx.

OK ... got a Christmas Eve gig coming up at the church, and I needed two wireless mics, 1 for a saxophone, the other for a mandolin. Cudos to Amazon/SGPRO .. got the mics several days before scheduled delivery. I'm going to echo the one other review on this product ... there is no fricken user manual!! Took both up to the church, plugged one in, tested it ... sounds GREAT! Turned on the other one ... changed the frequency on the receiver .... wha wha wha wha!! Here is where that manual would have come in handy. It's easy enough to change the frequency on the receiver, push the unlock button, then push the adjustment knob to toggle around, change your settings, and then just wait and it relocks itself. HOWEVER ... since the mic/transmitter come already assembled .. a casual glance does not reveal that there is an IR Window for programing on the transmitter that can't be seen until you remove the transmitter from the mic. You clearly see this little IR button on the receiver, and you push it, and the IR light on the front starts flashing ...but I had no idea what it was searching for until I came back to the Amazon page, and found some addition information on the unit at the bottom of the page. SO .. since the SGPRO guys don't seem fit to give us a manual ... you can use this review at the manual.It's all really pretty simple. Assembly: attach the antennas .... they are quick connect. Just line up the slots on the cuff with pegs on the unit, push and turn. ... done. Plug in the AC adapter in the back. Plug in your output line .. it has both 1/4 in and XLR (I bought this unit because it has the XLR balanced output that easily plugs into our digital snake). Turn it on! It will originally be set to GR-6 CH-1. As I said, the Microphone comes preassembled and preprogrammed to 6-1. You are ready to go. If you have multiple units, like I have, you have to change the GR or CH on the receiver. I changed both to give as much spread between signals as I could get. Simply push the "unlock" button. Then push the "adjustment knob" to toggle through the menu. Turn the knob to move inside the menu. For example ... push unlock, you'll have three choices on the main menu ... GR/CH, Scan, Effects. Highlight the one you want by turning the adjustment knob, and then push the adjustment knob to select. That will open up the sub menu. For example ... GR/CH will have GR and CH under it. Select the one you want with the adjustment knob and push again. This will highlight the number on the right side of the screen .. either GR or CH depending on which you selected. Turn the knob to change the GR or CH. You'll notice that as you change them, it will automatically change the frequencies. When you are done, push the button again. In some cases you'll see an "exit" .. turn the knob and select exist and push again. You can do the same with the "effects" menu. After you get things the way you want ..... just wait. The system will automatically relock. AT THIS POINT .. you have to separate the mic from the transmitter. They show you how in pictures on the Amazon Product Page (basically, use your thumb to "slide" the two apart ... kinda like you would slide a lithium batter onto a cordless drill). On the underside of the transmitter (the face that faces the mic), you will see a glass square (this is the IR window). Turn ON the transmitter, then on the receiver, push the IR button. The IR light on the front will start flashing. Hold the window up to it about an inch or so away, and it will program the transmitter to the frequency you selected on the receiver. The IR Light will stop flashing once it has synchronized the transmitter. Slide the receiver back onto the mic, and bam ... your transmitter is now synchronized with the receiver. Now you are ready to play. While I'm at it ... if you are using two units ... and turn on both transmitters and both transmitters are tuned to the same frequency, neither will work!!! It confuses the receiver. Don't freak out ... just turn both receivers and transmitters off. Turn on the one receiver, and it's matching transmitter and leave the other transmitter OFF until you reprogram it and change the transmitter frequency.I hope this helps people. All the other wireless instrument mics I saw that had an XLR output were over $600!!!! .. and most of them didn't even include the mic .. just the transmitter. These little guys really are a good buy. And the sound is full with really good low responses.