No hay artículos en el carro
No hay artículos en el carro Basado en el patrón original del coche, se adapta perfectamente a cada volante de coche.
Nombre de la marca: MEWANT
Grosor del material: 1,2 mm-1,5 mm.
Modelo de coche adecuado (para referencia): compatible con Mazda CX-30 CX30 2019-2020 / Mazda 3 Axela 2019-2020. Compara tu propio volante con nuestra imagen antes de comprar.
Nota: nuestro diseño predeterminado: es el mismo que nuestra imagen.
No quites el piel original de tu volante. Vídeo de instalación: subimos videos de instalación en YouTube, buscamos "Ouyue MEWANT" para verlo. Nuestras fundas de volante necesitan que los clientes se instalen por ti mismos, solo puedes instalar directamente, tenemos herramientas de instalación e instrucciones para ayudarte con la instalación.
El paquete incluye:
1 funda para volante.
☆ 1 aguja y 2 hilos de coser (coser la funda del volante).
☆ 1 calcomanía de doble cara (fija la posición del piel de la cubierta, no es necesario, también puedes elegir no usarlo).
☆ 1 hoja pequeña (meter piel extra en el volante).
☆ 1 dedal (protege tu mano).
1 instrucciones de instalación
Pierpaolo Ramotto
Comentado en Italia el 29 de marzo de 2025
Purtroppo l’articolo non è quello rappresentato in foto. Il fornitore è stato gentile a contattarmi e specificare che su Amazon le foto non corrispondo.Comunque di per sé il coprivolante è di buona qualità. Consiglio di acquistare direttamente dal sito del fornitore.
Aida
Comentado en Canadá el 20 de marzo de 2025
I love this product. Have been using it for 5 months now with no issues. It was sent to me perfectly cut for my vehicle model. Tucked in nicely o. The edges, and the stitching was easy though time consuming. Overall very happy!
Riley
Comentado en los Estados Unidos el 18 de febrero de 2025
Cover is great, I think the instructions should be much more detailed, however plenty of tutorials online and pretty easy to do yourself
John Furfaro
Comentado en los Estados Unidos el 19 de junio de 2024
The product itself is a 5 star product, though the installation not at all foolproof. I have done stitched steering wheel covers before, so I had a fair idea of what I was getting into. As many other reviews have said, it is important to give yourself *a lot* of time to install this. DO NOT RUSH IT. I ended up taking basically all afternoon because I did it in sections and had to take frustration breaks. It is very tedious, and this one was much tighter than the other cover I installed. The kit is very complete with everything needed (though I did not use the adhesive strips at all). The plastic trim pry tool is super nice and useful especially with tucking in the cover at the 9 and 3 spokes.I'm a smidge OCD so even though my finished result is quite good, as you can see in my picture, I was unable to get the bottom sections 100% perfectly even with one another. The bottom right quadrant should have been twisted out a little bit to match the stitching line of the left bottom. I also couldn't get that side to cinch together quite as perfectly as the other. When installing, be sure to quadruple check your seam location and ensure it's 100% even across every section, and also make sure the seams line up with the section breaks (like where the top and bottom halves of the cover meet at 10 and 2, etc).I have no doubt it was my own fault with not getting it to line up 100%, but it would have been nice to have 0.5 or 1 mm more width of the leather to have more play with the install. Once the cover is stitched on, there is literally zero play to twist / adjust / finagle the cover at all. This is both good and bad.. it should be tight and not move but a tiny amount of play so that if you really put some torque on it so you can make small adjustments.One important thing to note is there will not be enough thread if you double-thread it.What I mean by this -- if you are familiar with sewing, you know how you typically tie off a big loop at the needle when you sew through the material, then the thread pulls the loop giving you two threads? Don't do that. It looks weird with two threads, and more importantly, you will run out. The directions show only pulling through one thread. I should have paid more attention to that in the beginning... ask me how I know.I ended up getting the real leather material, and the feeling of the leather is a big upgrade from the stock wheel which I found too hard. I'm hoping the leather wears nicely over time. If it starts to break down prematurely, I will update this review.TL;DR - great product but there is zero forgiveness or play in the finished product. Make sure your seams are fully even and give yourself lots of time. Follow the directions. Godspeed.
Maier
Comentado en Alemania el 23 de octubre de 2024
Passt perfekt!
Manuel alejandro Solano lugo
Comentado en México el 10 de noviembre de 2023
CERO práctico
Productos recomendados
Mex $4,057.41
Mex $ 1,785 .00 Mex $1,785.00
Mex $382.82
Mex $ 199 .00 Mex $199.00
Mex $2,090.29
Mex $ 961 .00 Mex $961.00