No hay artículos en el carro
No hay artículos en el carroDo you install replacement speakers? The Ford Speaker Adapters by Metra will fit a wide variety of vehicles. So if you work on a lot of Fords, keep plenty on hand.
Anthony Vega
Comentado en los Estados Unidos el 31 de enero de 2025
I saw many people having issues regarding switched polarity and was a little concerned. But I personally did not have this issue. 1999 Ford Explorer Sport 2d
David
Comentado en los Estados Unidos el 2 de abril de 2025
2013 f 150. Perfect fit. No splicing.
Customer
Comentado en Canadá el 27 de agosto de 2024
No splicing necessary. Clipped these on and right on to my Ford, easy and fast. Worked great.
Henry
Comentado en México el 19 de noviembre de 2023
Me funcionó en ranger 2010
Francisco Ibarra O.
Comentado en México el 16 de junio de 2021
Excelentes conectores para bocinas, Encajan muy bien con el arnes de fàbrica del mustang 2007.
Cesar Guadarrama Pantaleon
Comentado en México el 1 de junio de 2021
Si lo que quieres es una instalacion plug and play sin la necesidad de cortar o puentear cables poniendo en riesgo el sistema electrico de tu auto estos arneses son una excelente solucion.
Tim
Comentado en los Estados Unidos el 11 de enero de 2021
The number one thing these reviews have said is that the wires are pinned into the connector incorrectly. This is true, the negative wire on these does not match up with the negative on the body harness. BUT THERE IS NO NEED TO CUT OR SOLDER ANYTHING TO FIX THIS. Normally I would suggest de-pinning the Metra connectors but I couldn't quite tell how they de-pinned and I was concerned about the quality of the connector in switching the pins (this was valid, read on). The easiest thing to do to make these work properly is to de-pin the body harness. All you need is a small flat blade screwdriver and some patience.1. First thing you want to do is disconnect the stock speaker and throw it away.2. Then focus in on on the body harness connector, you will see a red locking mechanism (plastic), there is also a red gasket there (rubber) so look close. Stick your flat blade screwdriver between the plastic lock and rubber seal to pry the plastic lock up (see pictures).3. Once the lock is popped up, you then need to pull it straight out, you can user the screwdriver but I would suggest a small needle nose. It should come easily, just make sure to pull straight and not break it.4. Now that you have the locking tab off the connect. Look inside and you will see the two pins and a small space above them (sorry didn't take a picture). If you look even closer there is a little tab that needs to be lifted to release the pin. The best way to do this is to get your hands on the wire and connector in a way that you can apply a slight pull force on the wire while trying to lift the tap inside the connector. It can be a little funky at first but just be patient, just remember you are trying to lift the tab AND pull the wire at the same time so as soon as the tab is lifted high enough the wire will release. No need to yank on the wire, if its not coming easily then the tab is still holding it. Remember light constant pull on the wire while prying the connector.5. Repeat for the second pin.6. Replace pins back into the connect into their new positions by simply sliding them in. No tools needed.7. Replace the red locking tabby simply pushing it back into place, and you are ready to go! No cutting or soldering needed!The other reason I gave these a four star instead of five was that one of them just didn't fit right in either door. The pins would not seat correctly and eventually I pushed hard enough that one of the pins in the metra connector popped out and couldn't be locked back in. I was able to manipulate it enough to get it connected and used some shrink tube to secure in place. Works but seems like a QC issue, then again these are only $8 so
Luis F.
Comentado en México el 4 de septiembre de 2021
Llegaron en tiempo y forma, es lo que describe el vendedor y quedaron muy bien lo único como comentó otro comprador los pines no estaban alineados con el contacto del carro pero solo los “empujé” un poco hacia adentro con un desarmado y listo!! Entro perfecto
Luis M.
Comentado en México el 30 de septiembre de 2021
Excelente calidad, quedaron perfectos para poner bocinas comunes en mi ford. Los recomiendo y estan mas economicos que en otros lugares de internet
edgar
Comentado en México el 23 de abril de 2021
La mejor opcion ue puedes tener para no cortar nada de cables y agregar bocinas de otra marca ,todo es plug and play ...aqui mis fotos
Yorch JG
Comentado en México el 10 de noviembre de 2020
Lo compré porque en la foto de la descripción era muy parecido al arnés original Chevrolet, para mi buena sorpresa, aunque no queda a la perfección por la forma que no es exactamente igual, si funciona muy bien y cumple con su cometido; un poco de cinta tela y quedó excelente, mi auto es un Chevrolet Onix 2021 para mejor referencia. Éstos los usé en las puertas delanteras, seguro los compraré nuevamente para las puertas traseras.
M. Scott
Comentado en Canadá el 8 de agosto de 2019
These adapters were a perfect fit forMy 2012 Ford Escape. Nice tight connections, and no problems at all to connect to the speakers, or the speaker wires from the suv. Some have mentioned needing to expand the clips with a screwdriver, but this is unnecessary. The connections are MEANT to be tight, and if you are familiar with this type of connection, you know all that you need to do is gently wiggle the connector as you slide it over the clip, rather than push it straight on. it will seat itself properly, once you get it started, and leave a tight, secure connection. These were a life saver, and I am 100% satisfied. 👍
Cesar@lf
Comentado en México el 11 de febrero de 2018
Los ocupé para instalar a un chevrolet, ironicamente son mejores que los fabricados para chevrolet (Para un Buick Encore 2014).Solo fue necesario cortar la corona plástica para que puedan acoplar en el arnés de GM y funcionan muy bien al eliminar la necesidad de cortar los cables originales. No es lo ideal pero funciona, además están bien fabricados.
Productos recomendados
Mex $2,818.95
Mex $ 1,240 .00 Mex $1,240.00
Mex $289.00
Mex $ 147 .00 Mex $147.00
Mex $799.59
Mex $ 407 .00 Mex $407.00
Mex $391.00
Mex $ 199 .00 Mex $199.00