No hay artículos en el carro
No hay artículos en el carroMetra arnés de cableado para radio para Audi/BMW/VW 00 en adelante.
Sarah-Jane
Comentado en Canadá el 15 de enero de 2025
Fit well with my 2015 Jetta. Does not allow for factory camera and steering wheel controls to be hooked up separate modules required.
Carter Ross
Comentado en Canadá el 14 de enero de 2024
I needed this to add an aftermarket stereo to my VW GTI. I used it for the power functions and not the speakers as I added an aftermarket amp. I don't expect any issues with the other cables I simply did not need them.
NZ
Comentado en los Estados Unidos el 14 de octubre de 2021
Easy to install. The wires are long enough to do any solder work in the car. Just do not forget to install the blue remote wire. It took me a couple of days to research why sound doesn't go to the speakers. YouTube has a lot of bogus videos about removing some electronic units at the back of the car. I almost did this; Lucky me I found a very old video for a different BMW showing how to connect all the wires. I thought the blue remove wire was for remote control for steering wheels. Anyways... DO NOT FORGET TO CONNECT THE BLUE REMOTE WIRE... life will be easier for you
Gil
Comentado en México el 22 de octubre de 2020
Cumple su función... materiales aceptables
Miguel Bosch
Comentado en México el 20 de marzo de 2019
no funciona
Eric B.
Comentado en Canadá el 21 de marzo de 2016
Used this wiring harness to connect my Pioneer APPRADIO4 to my 2004 V6 Touareg. Perfect fit, and soldering the connections was a breeze. Highly recommended (just make sure it fits your car.) Fitting the unit back into the dash with this was tricky (just soldering the bare wires would leave more room) however this is definitely the easiest option.
Nick F.
Comentado en los Estados Unidos el 1 de abril de 2013
Worked perfect for my 2003 BMW Z4 2.5i. The harness does not allow for the ignition 12V+ hot wire (providing power only when the ignition is on). You will need to tap off of the fuse panel (I used a 10amp add a circuit fuse) and run the wire directly to the aftermarket stereo red (hot) wire. On my 03 Z4, fuse #6 and #33 are 10A fuses and only hot with ignition on. I used #33. My OEM stereo specs are non-DSP, 10 speaker, business CD, non-nav. This harness may not work with DSP systems.
Productos recomendados
Mex $457.00
Mex $ 237 .00 Mex $237.00
Mex $2,818.95
Mex $ 1,240 .00 Mex $1,240.00
Mex $2,066.76
Mex $ 1,033 .00 Mex $1,033.00
Mex $3,052.00
Mex $ 1,220 .00 Mex $1,220.00