No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Lo que obtendrás:
- 1 lijadora de órbita aleatoria sin escobillas MAXXT
- 1 almohadilla de lijado de 5 pulgadas
- 10 papel de lija de 5 pulgadas
- 10 papel de lija de 6 pulgadas
- 1 rosca de 1-3/8 pulgadas
- 1 llave Allen
- 1 manguera de polvo
Logra acabados impecables en menos tiempo con la lijadora de órbita aleatoria sin escobillas MAXXT
Equipado con el motor EC, esta lijadora de perfil bajo, larga vida útil y baja vibración puede funcionar todo el día con múltiples turnos. Con una carrera de 5 mm, esta lijadora ofrece el rendimiento de una lijadora de aire. Está equipado con características innovadoras, que incluyen función de memoria, frenos eléctricos de lijado y mucho más, lo que la convierte en la herramienta de lijado de alta demanda.
Voltaje de calificación: 230 V/60 Hz. Potencia nominal: 3.5A 350Wórbita: 5 mm. Velocidad sin carga: 4000-10000 RPM. Peso neto: 1,27 kg
Lijadora de órbita aleatoria sin escobillas MAXXT
El freno eléctrico de la almohadilla de lijado y el control electrónico permiten un arranque suave para evitar daños en la superficie y el frenado de la almohadilla casi inmediato.
Eficaz y de larga duración: potencia a través de las exigencias más duras con un motor sin escobillas EC que ofrece un flujo de rendimiento potente constante.
Una vida útil excepcional para usuarios pesados, al tiempo que proporciona un flujo de trabajo suave y un alto grado de eficiencia, sin tiempo de inactividad para frenos de pastillas o reemplazo de cepillo para polvo.
Ahorro de tiempo: El uso de esta lijadora de palma te pone en una experiencia de lijado completamente nueva, elimina el material tan rápido como quieras, rescata a las personas del trabajo de lijado de mucho tiempo cortando el tiempo en ¼ y ofrece un alto grado de eficiencia de trabajo
Motor EC
El motor sin escobillas combina las ventajas de larga vida, bajo costo de mantenimiento, baja vibración, bajo ruido, sin interferencias y un funcionamiento suave, puede funcionar en múltiples turnos durante todo el día.
Salida de polvo antideslizante
Salida de polvo antideslizante mejorada, excelente rendimiento de sellado, recogida de polvo eficiente
Dos almohadillas para orejas de respaldo y 20 discos de lijado
Equipado con dos almohadillas para orejas de respaldo de alta calidad, 125 mm (5") para áreas más pequeñas y 150 mm (6") para áreas más grandes, ambas almohadillas para orejas en una sola máquina cumplen con casi todo el trabajo de lijado.
Paleta de interruptor de velocidad ajustable
Tabla de remo de velocidad ajustable, se adapta fácilmente a una variedad de entornos de trabajo
Tim
Comentado en los Estados Unidos el 4 de febrero de 2025
I am really impressed by this sander so far. It is a substantial difference to a standard 2.5mm RO sander. You really notice that 2x orbit in the speed and smoothness of sanding. It also makes tasks like polishing with a felt pad possible since it actually has some real stroke/travel to the orbit. I cannot speak to longevity yet as I've only used for a few projects. I have run this sander and my shopvac on the same circuit with no issues at all. My basement is all on one breaker, so I was worried based on a few comments about the voltage drop sensitivity. I do not have an auto on dust collector though, it's just a shopvac and this sander plugged in.I really like the low vibration, since the stroke is longer it makes the numb hand problem a lot less than my other RO sander. The hand grip is also great, really like the cut out under the grip for hand positioning for longer sanding with low fatigue. The dust collector outlet worked well with my current setup as well. I have tons of 5" disks, so a model that comes with 2 sizes was a huge plus so I didn't have to buy a whole assortment of 6" disks yet. This is by far the most expensive sander I've purchased and it feels so in multiple ways. Even the cord is a nice feeling wire. It's not that cheap inflexible pvc garbage on most tools. It's a very supple and long cord which is rare these days. I can't compare to some of the much higher priced sanders, but if this one lasts I do not see any reason to spend 3x more.
Dustin Brown
Comentado en Canadá el 27 de febrero de 2025
I bought this sander a couple of weeks ago as I thought I'd give it a try for $300, instead of $1,000 for a Mirka or Festool, both of which I have used before. To my surprise the sander is very well built, well balanced, has a little more vibration that sneaks through than the other two, but it sands well and dust collection is good, not amazing but good. For the price difference, if this last me as a evening weekender woodworker for a few years then it's well worth it. It's honestly not that far off from the Mirka or Festool. So if you're saving for one of those two, don't overlook this sander, I'm very happy with my purchase. And it's night and day difference to one of the big box store Dewalt or Milwaukee sanders.
Canada Dave
Comentado en Canadá el 20 de agosto de 2024
I gave this sander a trial run sanding a solid ash door. It does a great job. Not noisy and very little vibration. It has a very long power cord and the dust hose plugs right in to the one on my dust collector. The speed control is great and I like that it came with both 5 and 6 inch pads.Replacement pads are available on Amazon as well.
marcelino flores
Comentado en México el 2 de febrero de 2024
Muy buen equipo.
Katerina - Five Hearts Refinishing
Comentado en Canadá el 11 de diciembre de 2024
Genuinely surprised by the quality of this tool thus far. As a full time furniture refinisher - I am always using sanding tools. I have several different kinds and was thinking of purchasing a 5" orbital surfprep - but the hefty price tag stopped me cold. This is superior to my normal orbitals and on par with my 3x4 surfprep sander. Very happy with it.Five Hearts Refinishing
Matt
Comentado en los Estados Unidos el 15 de abril de 2024
Like everyone else, I was looking for a Festool or Mirka type sander but didn’t want to pay their price. I read all the reviews and decided against getting it originally due to it randomly shutting off. I ended up circling back to the model because I saw some videos of a way to prevent it from shutting off. Apparently, it’s overly sensitive to voltage drops / peaks and most people plug it into the same outlet as their dust collector or vacuum. For some reason, this creates an issue with the sander and causes it to shut down. Knowing this, I decided to take a gamble and I got it. Granted, I have a window to send it back it if it shuts down.I was almost going to get the 3m but it had worse reviews and was more expensive.I’ve used it for a couple of days without an issue.I don’t have any cons right now but here are the pros…. It’s much quieter than the big Bosch I have, there’s zero hand fatigue, dust collection works great, it’s comfortable in the hand, good price, and I have the option of it being a 5” or 6” sander.There are lots of similar models on Amazon with different names but think they are all pretty much the same. However, I did see a review of a red one which was compared to the Maxx and 3m and the reviewer said the dust collection sucked. Sucked as in, it wasn’t good compared to this model and the 3m.If you’re on the fence, I say, go ahead and get it. Keep it plugged into a different outlet on a different circuit and just let the sander do its job without putting your weight on the thing and it will work fine.Update-- It's been a few weeks and it's working perfect. It hasn't shut off once.
Productos recomendados
Mex $815.19
Mex $ 399 .00 Mex $399.00
Mex $4,160.00
Mex $ 1,881 .00 Mex $1,881.00