No hay artículos en el carro
No hay artículos en el carroEl tornillo Kreg Jig HD tiene una longitud de 2-1 / 2 pulgadas y el vástago No.14 y la cabeza del tornillo más grande le da a este tornillo HD más fuerza y capacidad de retención.
Justin F
Comentado en los Estados Unidos el 1 de abril de 2025
No se pudo cargar el contenido.
Arcy Clements
Comentado en Canadá el 21 de julio de 2024
Good price, quick shipping, great product
Lane P.
Comentado en Canadá el 11 de junio de 2024
I installed it in my 2005 Ram 3500. It’s easy to put in and looks great. Good quality, I recommend.
Miguel T.
Comentado en México el 26 de diciembre de 2024
Tapete de muy buen material y se ajusta perfecto en la RAM de una cabina, fácil de limpiar, no se resbala
Herman
Comentado en los Estados Unidos el 30 de octubre de 2024
Perfect fit
Customer
Comentado en los Estados Unidos el 8 de enero de 2024
Bought one for my 2006 Dodge 1500, it fit like a glove. You would think it came from the factory with it.
MG
Comentado en Canadá el 29 de enero de 2024
Very good quality, the fit was impressively accurate and the edges are much higher than other similar brands. I am impressed.
Fishnfreak
Comentado en Canadá el 10 de mayo de 2021
Great item for more robust projects requiring additional durability. Used to build six large doors (9x4) and a set of exterior stairs. Happy with the quality (fit/finish), have used two tubes and on too my third. Pricing was better than I found locally (hard to find locally). Will continue to use, would recommend. Used a #3 bit and the larger Kreg jig.
Alan Dale Daniel
Comentado en los Estados Unidos el 11 de mayo de 2020
The Kreg system these screws are made for connects 2x4s or other large lumber for large projects. I've used them often in construction of yard projects, inside shelving and so forth. They work great. I have never had them fail, and I've used them for a wide variety of projects since they first came on the market several years ago (more than 10, and maybe as much as 20 years ago). I've used other Kreg screws for cabinet work and they are also excellent. I've owned two Kreg jigs and used them extensively for many years.Once 2x4 are joined by these screws they hold fast and the boards are not going anywhere. These screws will suck the joint up tight. Of course, the lumber has to be prepared correctly and the joint has to join flat, because nothing will make up for sloppy work or really bad lumber used without preparation, but if you follow even basic woodworking techniques these screws will make a dependable joint that very strong.AD2
Kyle Buller
Comentado en Canadá el 19 de octubre de 2020
Best screws out there especially if you make use of the Kreg HD pocket hole jig!
J. E. Simon
Comentado en los Estados Unidos el 14 de septiembre de 2012
These screws are used with the Kreg HD pocket jig and drill.. I love them. These replace the #8 X 2-1/2 screws that are used in the standard jig. If you set the two screws side by side the difference is huge. These screws are BIG, really BIG. Both the shank and the threads are about twice as big as the smaller screw. They use a 1/2" pilot hole instead of a 3/8" hole. The maker says they are for 2 by lumber and they work great at joining that. I've been using them to make 8' long saw horses and they hold the pieces TIGHT! One thing to remember is that they use a #3 Robertson (square) screw driver, not the usual #2. I drove them with an impact driver without any trouble but I wouldn't even try to put one in by hand. They have a rust resistant coating that looks pretty tough. If you are looking for the drill to make the pockets for these this is it
Productos recomendados
Mex $540.00
Mex $ 253 .00 Mex $253.00
Mex $1,379.95
Mex $ 676 .00 Mex $676.00
Mex $2,429.00
Mex $ 1,068 .00 Mex $1,068.00
Mex $863.68
Mex $ 423 .00 Mex $423.00