Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Malla de valla soldada con revestimiento de vinilo negro de calibre 16 para el hogar y el jardín y proyecto de mejora del hogar (24 x 50 pies)

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,245.67

Mex $ 573 .00 Mex $573.00

En stock

1.Tamaño:24inch×50ft


Acerca de este artículo

  • 【Excelente resistencia al óxido】La tela de 2 x 50 pies está hecha de No. 16 alambre de acero galvanizado de alta resistencia y proporciona un doble revestimiento para maximizar la resistencia a la corrosión y vida útil. Revestimiento de vinilo que proporciona protección adicional. Se puede cortar fácilmente con tijeras. Moldeado o plegado según sea necesario sin ningún problema
  • Malla cuadrada: alambre de soldadura flexible de 1 pulgada, se puede utilizar para construir paredes de alambre de acero y techos para pollos para garantizar su seguridad y evitar águilas, zorros y mapaches. La apertura cuadrada de 1 x 1 pulgada sigue siendo lo suficientemente pequeña como para cubrir ardillas.
  • Tamaño y longitud: alambre de acero de calibre 16, el tamaño de la malla es de 1 x 1 pulgada. Mide 2 pies por 50 pies de largo y es adecuado para fines domésticos y jardines, incluyendo separadores de propiedades y cubiertas protectoras, que puedes ajustar a tus necesidades específicas.
  • Fácil de usar: el diseño flexible hace que la bobina de alambre de soldadura sea fácil de usar en una variedad de aplicaciones, puedes personalizarla de acuerdo a tus necesidades específicas
  • Aplicación: malla de alambre de acero de 1 pulgada, adecuada para varios proyectos de mejoras para el hogar. Ampliamente utilizado, adecuado para correr conejos, gallinas, pluma de pato, huerto.



Descripción del producto

0
0

0
  • 1 paño de hardware

Tela de hardware de 24 x 50 pies

El paño de hardware de 24 x 50 pies está hecho de No. 16 alambre de acero galvanizado de alta resistencia y proporciona un doble revestimiento para maximizar la resistencia a la corrosión y vida útil. Revestimiento de vinilo que proporciona protección adicional. Se puede cortar fácilmente con tijeras. Moldeado o plegado según sea necesario sin ningún problema

  • Material: Acero
  • Revestimiento: Galvanización y vinilo negro
  • Diámetro del cable: Calibre 16
  • Apertura: Malla de 1 pulgada

0

tela DE HARDWARE DE 2 x 50 pies

El paño de 2 x 50 pies está hecho de No. 16 alambre de acero galvanizado de alta resistencia y proporciona un doble revestimiento para maximizar la resistencia a la corrosión y vida útil. Revestimiento de vinilo que proporciona protección adicional.

0

Malla de 1 x 1 pulgada

Malla de 1 pulgada, alambre de soldadura flexible, se puede utilizar para construir paredes de alambre de acero y techos para pollos para garantizar su seguridad y evitar águilas, zorros y mapaches. La apertura cuadrada de 1 x 1 pulgada sigue siendo lo suficientemente pequeña como para cubrir ardillas.

0

Estructura de doble revestimiento

La malla soldada de acero es resistente al óxido, a la corrosión y al calor debido al acero galvanizado y al revestimiento de vinilo negro.

0

ESTRUCTURA DE SOLDADURA FIRMA

Revestimiento de vinilo después de soldar, todos los puntos de soldadura de nuestro rollo de malla de alambre forman una estructura de soldadura confiable

0

Fácil de instalar

El diseño flexible hace que la bobina de alambre de soldadura sea fácil de usar en una variedad de aplicaciones, puedes personalizarla de acuerdo a tus necesidades específicas

0

Amplio uso:

Malla de alambre de acero de 1 pulgada, adecuada para varios proyectos de mejoras para el hogar. Ampliamente utilizado, adecuado para correr conejos, gallinas, pluma de pato, huerto.

0

K Hawk
Comentado en los Estados Unidos el 7 de agosto de 2024
Easy to cut to custom height and radius dimensions to keep critters out. Pin down with landscape pins. Looks nice too. Completely stopped plant damage that repeated applications of Liquid Fence repellant didn't stop.
george
Comentado en los Estados Unidos el 16 de julio de 2024
Just what I needed but a bit pricey.
Eric K.
Comentado en los Estados Unidos el 18 de diciembre de 2023
I like how this came rolled up. It was easy to unwind across the ground to measure and cut. Simple pair of dykes cuts it like butter. Once I attached the fencing to wooden spike I hammered into the ground , doing it multiple times for strength and tying with zip ties. Then I bent the top of fence over by hand which gave it more strength and rigidity. My only complaint is small leaves were getting through the mesh. I should have gotten a tighter weave pattern. Likely 1/4" openings rather than 1/2" or 3/8". But the fencing has kept out a lot of leaves from the flower beds along the front of the house. The fencing doesn't come with spikes and those sellers offering spikes aren't giving you what you need anyways. I bought full length 1"x1"x12' PCs of wood from Home Depot and cut them into approximately 30" long sizes to pound into the dirt. Then use zip ties(also not supplied) to attach the fence to the wood . Putting the 30" tall wood spikes every 5'. The closer you put the wood the more Ridgid the fencing will be. Then, when done I bent the last 6" of fencing not supported and attached to the wood spikes over to create an upside down "L" . Keeps out large leaves but this size openings in fence allow small leaves through. So, get the smaller opening fencing w/ 1/4" openings if you wanna use it to keep our debris in winter. Also keeps cats out of your flower beds asman added bonus.
Sekhmet2
Comentado en los Estados Unidos el 7 de octubre de 2022
I used this coated wire for the catio I was building for my 5 cats. I had originally gotten a 1x1 inch vinyl- coated wire (3 x 50 feet) from the orange big box store. But, when inflation hit, the price of that wire increased by 30%. Since I only needed about 10 feet more to complete my catio, because I changed my original design, I looked for something less pricey here on Amazon. I purchased this wire.It's not that the wire is bad; it's not. But, it was not as thick as my original wire. So, if you are looking for a really thickly-coated 16-guaged wire, this is not it. But, if you have a simple use for it, it will probably work.I was not sure how I would cut this wire, but it turned out very easy with simple wire cutters held perpendicular to the cut you want to make. Initially, I used my jigsaw with a metal blade to cut the wire, but it din't have much control because the wires is so thi and wiggley. So, the simple wire cutter tool was perfect, if not a bit longer in time to finish the cut.Overall, this is good wire, but the coating could definitely be thicker. That would have helped with the stablility of the wire overall.
Zwieback
Comentado en los Estados Unidos el 10 de julio de 2021
The wire 'seems' less than 16 gauge, though I did not measure it. This 24" wide version is just a lot lighter weight ~13-14# delivery weight than the 36" wide other brand I bought which is ~45#. That one has a much more robust dipped vinyl coating than the lightweight coating on this 24" wide brand. This one was sturdy enough for my purposes, but if I had seen the shipping weight before I ordered it, I would have ordered the heavier brand. Watch the shipping weight so you are not surprised. Both were listed as 16 Ga.
Productos recomendados

Mex $1,350.00

Mex $ 567 .00 Mex $567.00

4.6
Elegir