Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

M12 x 1.5 Tuerca de rueda compatible con Ford EcoSport/Escape/Fiesta/Focus/Fusion/Ranger/Transit/Bronco/Bronco Sport 2012-2019 Lincoln MKC/MKZ 611-303 ACPZ-1012-H

Envío gratis en pedidos superiores a Mex $600.00

Mex $656.12

Mex $ 341 .00 Mex $341.00

En stock

Acerca de este artículo

  • Compatible con: Ford 2018-2022 EcoSport, escape 2013-2023, Fiesta 2011-2019, Focus 2009-2018, fusión 2012-2020, Ranger 2019-2020, 2014-2018. Transit,20 -- -- Bronco 21-2023, Bronco Sport 2021-2023, para MKC Lincoln 2015-2019, MKZ 2012-2016.
  • [Número de pieza de repuesto]--611-303, ACPZ-1012-H, CV6Z1012C.
  • Alta calidad: las tuercas de rueda cromadas de diseño de una sola pieza están hechas de acero de alta calidad, fuerte, duradero, a prueba de óxido y resistente a la corrosión, más seguras que los diseños de dos piezas y no se expanden ni se deslaminan.
  • Embalaje e instalación: tuercas hexagonales M12 x 1.5, 20 piezas, se recomienda utilizar una llave de mano para la instalación, no utilizar herramientas de impacto.
  • [Servicio posventa]--Ofrecemos garantía de un año y servicio de contacto en línea las 24 horas. Si tienes algún problema, no dudes en ponerte en contacto con nosotros.



Descripción del producto

V20 A+1

Número de pieza de repuesto: 611-303, ACPZ-1012-H, CV6Z1012C

V20 A+2
V20 A+3
V20 A+4
V20 A+5

James Claiborne
Comentado en los Estados Unidos el 24 de marzo de 2025
So far no problems and the also hold the hubcaps in place.
krysa
Comentado en los Estados Unidos el 20 de marzo de 2025
Perfect fit, better than original items installed.
MIGUEL
Comentado en los Estados Unidos el 9 de febrero de 2025
So I recently had to replace my brakes and noticed I was having a hard time removing the lug nuts. I had the correct socket but it wouldn’t fit correctly. After some research I found out that the OEM ones swell up causing this exact issue. I found these here on amazon. After some comparison, These are one piece, look of good quality and appearance as well. I attached pictures of the OEM ones the left and new ones on the right. They have the same conical bottom and fit perfect as you can see in the picture. Hope this helps anyone with the Ford Focus lug nuts.
Mike Feagans
Comentado en los Estados Unidos el 25 de febrero de 2025
This is exactly the lug nut you need for your Ford Fusion (mine is a 2014). I had the infamous issue with the factory lugs which are actually constructed with 2 separate layers of metal. The outer layer is notorious for causing major issues getting the lug nuts off. The local repair garage did a brake job for me on my rear axle. They had to replace some of the Lugs. They were a different size from the originals. I didn't like that so I decided to replace all of the lug nuts. There are several different styles here on Amazon that claim to be the correct ones. Not all of them are. They lack the flange, look like they could go through the hole in the rim, leaving you wondering how securely they are holding the rim on the car. This particular set is exactly what is needed, with the flange to cover the hole in the rim completely. I have attached pictures of the lugs and the finished product on the car.
George Chicu
Comentado en los Estados Unidos el 23 de octubre de 2024
Fit my 2014 ford fusion perfectly...tighten them with a cordless impact....no marks or anything falling off
Productos recomendados

Mex $2,021.41

Mex $ 848 .00 Mex $848.00

4.3
Elegir

Mex $409.66

Mex $ 204 .00 Mex $204.00

4.3
Elegir