No hay artículos en el carro
No hay artículos en el carroMás información del producto
T. F.
Comentado en los Estados Unidos el 18 de marzo de 2025
The Lutron Caseta system is remarkable, and easily works without a home router or network.However the Lutron Caseta system can also be linked to a smart home management system if desired.The Lutron Caseta system is rock solid reliability, and very easy to set up.This Outdoor Smart Plug is no exception.Set it, and forget it. No constant fiddling.It works every time all the time.HIGHLY RECOMMENDED!
Philip Glassel
Comentado en los Estados Unidos el 27 de enero de 2025
While this unit is targeted for outdoor use, it is also very useful for enhancing the usefulness of indoor loads. This device can handle both resistive and inductive loads (e.g., lights as well as motors) up to 15A (or 1/2 HP motor).I have a shopvac that I use for dust collection in my shop. It was awkward to always have to move away from my workbench in order to turn it on and off when about to make a cut. This made it too tempting to skip the vac when I had only a short cut to make. Paring this switch with two Pico remote switches allowed me to place the remotes on two of my most-used torsion tables. As a result I now always turn the vac on even when making a single, short cut.This has worked so well that I will be acquiring a couple more units to use with two larger dust collection units. While this is not a review of the Pico remote, they pair up with this switch very easily.Contrary to the "About this item" writeup for this switch, I don't believe it is necessary to use a Caseta Smart hub for this pairing. I have a very busy hub for other reasons, but this is a very simple Caseta Wireless relationship and I manually paired the controllers with the switch. My hub has no knowledge of these pairings, nor is there any real reason to use a hub for this purpose.The attached pics are 1) the switch mounted to my torsion box, 2) Pico control on the torsion box (one of which is for the switch), 3) the switch in shop context.--- update ---I have now added two more units to control the larger dust collectors in my other shop area. I was able to add two sets of Pico Controllers in strategic locations to make it much more convenient to control these collection devices. Note that the Pico switches can be mounted anywhere you have a flat surface. This is just too cool!
Keith R. Douglas
Comentado en los Estados Unidos el 20 de diciembre de 2024
I started to order a Caséta lamp receptacle to use to turn my incandescent 300 lamp Christmas tree on and off per a schedule, but then saw the low amperage (less than an amp) rating and decided I needed something to support more current draw. I chose this item because it has support for up to a 15 amp load is Caséta compatible.It works as designed, though I will say follow the directions (which are only online and accessible via the QR code) explicitly. Adding this device to your system is easy by opening the app, pressing the LED until it fast blinks, and then following the directions presented in the app.I will caution that before the device was "saved" to my Caséta hub, I interrupted the sequence to change the name of my device. That was a mistake! I should have gone through the complete adding sequence and then gone back and altered the device name. That will make sense to you if you have programmed a number of Caséta devices, OR when you go through adding this one to your system.So my device was not completely saved due to my editing the name out of sequence before the final step and consequently I could not "schedule" the device in the app.The answer was to hold down the power LED on the device then click it three times and then repeat that sequence which put the device back into factory default mode where I could start the programming again and properly go through the three simple instructions presented by the app without interrupting the process with a name edit.So - easy peasy. Plug in the device; hold down the LED until you get the fast blinking; go to your app and choose the type of device you are adding and follow the instructions which are given to you in the Lutron App! I love my Caséta devices and the Lutron app!
JL in Markham
Comentado en Canadá el 14 de noviembre de 2024
Over the last 3 years this outdoor plug has had no issues -one of the most reliable smart units of the many brands I've owned. It has operates my waterfall pump (check the load capacity and keep within specifications) in summer and flood lights in the fall and winter, oh and Christmas lights too. Combined with the Caseta hub I've found the unit to be robust and well worth the investment.
Mario
Comentado en Canadá el 21 de octubre de 2024
They are easy to install with the Lutron App and hub and work seamlessly with HomeKit and Alexa. They aren't cheap, but are dependable in extreme weather. Unlike wifi devices that often lose their connection these devices stay connected. I now have 4 of them.
JESUS CAMPOS
Comentado en México el 4 de enero de 2023
Muy útil para programar el encendido y apagado de luces navideñas.
JOSE H ALANIS SALAZAR
Comentado en México el 4 de septiembre de 2022
Es un lutron !
pepe
Comentado en México el 13 de junio de 2021
Caro pero excelente. No falla. Muy bien construido. Muy fácil de instalar
Productos recomendados
Mex $1,608.02
Mex $ 643 .00 Mex $643.00