No hay artículos en el carro
No hay artículos en el carroEl conmutable LED Versi Lite de 7 pulgadas FMMLS es conocido por su instalación simple, óptica funcional y atractivo estético que lo convierte en la solución perfecta para espacios residenciales y comerciales ligeros. El FMMLS contiene tecnología blanca conmutable que te permite elegir tu temperatura de color, las opciones incluyen: un blanco cálido de 3000 K, un blanco frío de 4000 K o luz diurna de 5000 K. El FMMLS es perfecto para su uso en lugares interiores y exteriores como pasillos, pasillos, porches, armarios, despensas, lavaderos, habitaciones pequeñas, baños, duchas, escaleras, áreas de trabajo y mucho más
Hector
Comentado en los Estados Unidos el 20 de agosto de 2024
I replaced flourecent lighting with these and it is a vast improvement in lighting and brightness. The brightness can also be controlled if needed.
DMeaux
Comentado en los Estados Unidos el 21 de febrero de 2024
I love these lights great quality and easy to install.
Customer
Comentado en Canadá el 2 de enero de 2023
I used one of these years ago and figured I would try a couple more in a rental home. They work fine but have a strange flash before turning on. They all do it. Lithonia seems to have gone down in quality since my older ones never did this. Otherwise they’re decent lights.
Customer
Comentado en los Estados Unidos el 18 de enero de 2023
With modern LEDs this compact 12.2 watt fixture has a lot to offer! It is ready to mount to a standard electrical junction box, has a 5 year limited warranty, and no bulbs to replace! It can be dimmed with most dimmer switches, and during installation you can select 3000K, 4000K, or 5000K for a warm, mid, or cool color temperature. The color temperature switch is on the circuit board with 15 “warm” and 15 “cool” LEDs and other electronic components. The circuit board is mounted to the metal housing and behind the transparent protective barrier that includes 3 retainer tabs to secure the diffuser. A nylon actuator goes through the metal housing to allow the installer to select the warm, cool, or both colors of LEDs during installation, before 120v power is applied. A photo shows the actuator from the installers view. When moving this actuator I did not feel a click between positions. I went as far as I could for the end positions, and centered to the mark for the mid position. The 4000K position uses both the warm and cool LED's. The circuitry adjusts the brightness of the LEDs that are in use so that the same light level is provided regardless of color temperature selected.While testing and taking the photographs, I wired the fixture to a lamp cord and connected to a dimmer designed for plugging in a lamp to be dimmed. I found, for all 3 color choices, the dimming to be smooth. There was one point just as I began to dim that showed a slight flicker, but at that point there was not enough dimming to want to leave the dimmer there. A very slight increase in the dimming removed the flicker which was never seen again during the remaining dimming range. With any dimmer, YMMV. Even if your dimmer is not on the list of tested dimmers on their website, it may still work just fine, as they note. In the photos taken at each of the switch settings, the red, green, and blue markers along with the colors on the box lid give an indication of the slight color difference the 3 settings give.Now, a look behind the curtain.With the diffuser removed, I took a photo with the dimmer adjusted to just turn on the 15 “cool” LEDs. At that point if the diffuser were on you would not even be able to tell that they were on. But, as you can see in the photo, the camera shows them as white, compared to the “warm” LEDs that were not on, and look orange. (They all look that color when they are off.)I found nothing to complain about with this product, and rate it 5 Stars. I’m looking forward to a warmer day and the time to install this (and another fixture) in my utility building!
Kevin
Comentado en los Estados Unidos el 15 de enero de 2023
I am very pleased with this 7-inch, flush mount, LED light. Here are some reasons why:- The quality of the product was apparent as soon as I felt the weight of the box it came in. Inside I found signs of quality, such as a sturdy metal fixure housing, a thick plastic diffuser (where the light shines through), and a thick, clear plastic barrier lens (to protect the user from the electronics inside).- All that I needed to install it was included except tools. The necessary screws and wire nuts were there.- There are three choices of color temperature, ranging from 3000K to 5000K. I wanted the softer 3000K temperature, but it is still plenty bright.- The light comes on as soon as I flip the switch, with no delay that I can detect.I installed this light above my daughter's bunk bed, replacing a fixture that dropped the bulb down about 8 inches, so I'm really happy to have a low profile light that won't be a safety hazard for my daughter. It has been on about 30 minutes since I finished installing it, and the housing is warm but not hot.The wires that come out of the fixture are a very thin gauge, but the wire nuts hold them securely to the much thicker house wiring. Also, I was fortunate that my junction box had two options for the installation screws since the fixture required a wider spacing than the fixture it was replacing.When I got this fixture, it was about $18, which is a good value. But I see it is $40 now, which seems a bit high to me. But, if it lasts a long time then $40 would not be too much to pay for the quality I got.
Productos recomendados
Mex $327.00
Mex $ 160 .00 Mex $160.00
Mex $462.43
Mex $ 226 .00 Mex $226.00
Mex $436.00
Mex $ 239 .00 Mex $239.00
Mex $18,994.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $449.64
Mex $ 247 .00 Mex $247.00
Mex $433.00
Mex $ 220 .00 Mex $220.00