No hay artículos en el carro
No hay artículos en el carroLiftmaster – Abridor de la puerta Receptor Logic Board Número de repuesto para pizarrón 41dj001b.
Customer
Comentado en Canadá el 4 de febrero de 2025
Works as described - quick fix and much cheaper than replacing the entire mechanism
CSC
Comentado en los Estados Unidos el 6 de mayo de 2024
My liftmaster sidload opener has been going strong for over 13 years without a single issue. However last month I came out in the morning and my door was open. I thought I must of left it open the prior night and didn't think twice about it. Then a few days later I was in the garage working with the door up and suddenly it started closing on it's. Then about two hours later it did the same thing again. My neighbor had just shut her door to walk her dog and turns out whenever she opened or closed her main garage door it was cycling mine! We tested it and sure enough mine would open and close with hers. In 13 years of use this has never happened and was very concerning because I have probably $30k worth of tools in my garage.I cleared all the remotes from my opener and re-bound mine thinking that would solve the issue and sure enough a day later it happens again but when another neighbor opened or closed their door. I called Liftmaster and they suggested a new board. My guess is that one of the receivers for one of the two frequencies it uses to verify your remote transmitter died so whenever a neighbors garage hits the same frequency of the sole remaining receiver it triggers the door. Replacing the board is very simple and only took about 10 minutes. Hardest part was getting all your door sensor wires back in the right spot, but I did the original install 13 years ago so no problem for me. After replacing and re-binding my remotes I have not had any other issues.In fact it solved another issue with my remote liftmaster ceiling light. For nearly two years that ceiling light has stopped working. After changing bulbs and re-binding it I thought it has just died after 13 years. I had not replaced it because I can't bring myself to spend 70bucks on the replacement. I had actually just taken it down and tossed it in the trash but pulled it out when i ordered the new board. And sure enough that's why the light was not working, it must of been on the same frequency that died on the board so it stopped getting the signal to turn the light on and off. Now it's working fine again, glad I pulled it out of the trash!Was also about $20 cheaper than from Liftmaster. Date of production on the board was only 6 months prior to receiving it so it's current stock too.
ttwalz
Comentado en los Estados Unidos el 9 de marzo de 2024
Garage door wall unit stopped working and after doing my research I was hoping this would fix the problem. Install and reprogramming the door too about 20 minutes and everything works great again.
FRANK
Comentado en Canadá el 12 de julio de 2021
PRODUIT D ORIGINE FACILE D INSTALLATION ET DE PROGRAMMATION
Steve Turcotte
Comentado en Canadá el 19 de diciembre de 2020
Great product. Plug & play. You need to re-program your door up & down limits afterwards. Very simple. I recommend this product without hesitation.
Productos recomendados