No hay artículos en el carro
No hay artículos en el carroMás información del producto
Wilson v.
Comentado en los Estados Unidos el 19 de agosto de 2024
This is exactly what I wanted and it was made well. Quality built
Éric Landry
Comentado en Canadá el 8 de octubre de 2024
Fonctionne bien et la prise tient bien aussi. Semble être de très bonne qualité.
Gary
Comentado en Canadá el 21 de septiembre de 2024
Receptacle was for a generator, delivery was fast and exactly as ordered
william filsinger
Comentado en México el 7 de noviembre de 2020
Planta de luz
N. Franke
Comentado en los Estados Unidos el 26 de noviembre de 2020
This is a high-quality receptacle that works well. It holds in plugs securely with the twist lock. It's easy to wire using either straight wire or old school and wrapping it around a screw. It's fairly large, but that's needed for the large prongs.
D Taylor
Comentado en los Estados Unidos el 13 de octubre de 2013
This is a heavy duty nicely made L14-30 female receptacle that is designed to handle 30 amps at 240v. Each of the wires slide into a slot. There are 2 slots on each side, they are clearly marked with W,G,X,Y for the 4 wires used.This receptacle is well made and doing the job nicely. I firmly tighten down the #10 wire (which needs to be used to support the 30 possible amps). It's designed to hold this size wire.I primarily use this to supply power to my welder. The welder sits on a cart that I built with a power distribution center on it. I run a cord from the cart over to the wall where I have an L14-30 female to plug this into. It works well and I really like the locking connection, it keeps things plugged in if there's a little tension on the cords.The main reason for selecting this plug when I designed my welding cart is because it works with most of the 240v generators out there. Generators use this plug because it can handle 30 amps at 240v for about 7500 watts of power (30 x 240 = 7200) Use extreme caution if you backfeed info your home with this plug.There are 2 main concerns to watch for if you plan to backfeed power.#1, is that you MUST disconnect the main feed on the house main panel to make sure you are not trying to power up your neighborhood, and that you don't risk shocking a power line worker who might be trying to restore your power. If the power does come back online and your generator was to be connected, you would fry your generator.#2, is that to back feed a generator with this plug, you end up with a connection setup with 2 male ends. Those ends can be very dangerous if they have power. Connect your wires before turning on the power at your generator to keep from having any shock risk. If your only use for this plug is to backfeed, I suggest using this adapter instead. My reason for selecting this plug is that I use the same power outlet for powering my welder and have it available if I were to need to backfeed the home.This link takes you to the plug I used which is also well made and they work great together. Both of these pieces are available here on Amazon at a significant discount over the local big box stores.5 stars, a well-made lasting design for a great price.
Productos recomendados
Mex $475.76
Mex $ 218 .00 Mex $218.00
Mex $810.00
Mex $ 396 .00 Mex $396.00
Mex $215.00
Mex $ 126 .00 Mex $126.00