No hay artículos en el carro
No hay artículos en el carroJohn S. White
Comentado en los Estados Unidos el 4 de febrero de 2025
Good Ethernet connection and works well
Jhart0714
Comentado en los Estados Unidos el 28 de junio de 2021
It is difficult to make good connectors. About 1 in 5 failed and had a short. I’m a novice and it took about 15 minutes to make each connector. After a good deal of frustration, I used a true pass through connector and didn’t have a single issue. Plus, it cut time down to about 3-5 minutes per connection.If your a novice, I’d skip these and try something else.
YDi7
Comentado en México el 24 de enero de 2021
A quien corresponda buen día, la muestra de la foto que aparece en el rj45 no tiene nada metálico para interferencias para protección para blindaje, y no fue así
Leon D' Lion
Comentado en los Estados Unidos el 15 de abril de 2021
This is a real field results of Klein Tools - VDV826-611 Modular Data Plugs RJ45, CAT5e.I am an IT network professional. I have terminated thousands of cables with a 98% percent successful termination rate. Once, I terminated about 23 cables in about 18 minutes in a speed test between me and my field technician colleague for a customer home theater network rack system at a home worth $2.5 million! This was a $75K network and home theater install. I have installed IT network infrastructures for billion dollar network enterprise corporations -- from financial to medical industries.As you can see, the picture shows proper termination I did using 568B standards; however, it did not pass my LAN tester. This occurred numerously resulting to an abysmal termination rate of about 3/5 ratio (every 5 terminations, 3 did not pass my LAN tester). Upon very close inspections, I noticed that the terminable teeth do not penetrate the wirings very well. My only possible analysis is that they are not designed for 23AWG CAT-6. I have not had this error rate in my whole entire profession and my personal network installation for my homes.It works fine for CAT-5E cables, but there should not be any difference between CAT-5E vs. CAT-6E for this rudimentary application.
Cliente de
Comentado en México el 14 de marzo de 2019
el conector es un conector común, en la foto aparece con unas partes metalicas para aterrizar el conector, pero en realidad no las tiene. Viene en una sola pieza en las fotos aparece que esta por separado un agrupador de cables y el conector, no lo regrese por que lo necesitaba con urgencia
Mychailo Toloczko
Comentado en los Estados Unidos el 29 de enero de 2017
These work great with 24 awg stranded wire CAT6, but its a very tight fit into the wire guide with 23 awg solid wire CAT6. Either way though, every crimp was successful. It just took a while to thread the 23 awg wire into the wire guide. I can't see how 22 awg (within the spec of CAT6) would possibly work with these. Also note worthy is that these are very robust construction, and fit no problem into every ethernet receptacle I tried. And I crimped these using a budget UbiGear crimper.
Gerardo Cuellar Garcia
Comentado en México el 3 de abril de 2017
Completamente funcionales, de calidad. Conectores bastante simples, no me gusto el detalle de que para que no quede bailando el cable se tiene que armar con 3 piezas, y la pieza con los "canales" para pasar los cables queda bastante ajustado a los cables y complica el armado.
JLB
Comentado en México el 1 de septiembre de 2016
Un poco complicado acomodar los cables en las ranuras. No se si existirá otro producto que permita hacerlo con mas precisión.
MissingNoFingers
Comentado en los Estados Unidos el 17 de marzo de 2014
These are of decent quality, retain the wires well, and work perfectly with the Klein crimping tool. They are the same depth as many other brands and do work with my other crimp tools too. These are sold with each of the three parts in a separate bag then all in one clear plastic package. It would be great to see bulk packs of larger quantities someday.
Productos recomendados