No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Paquete: 1 manguera de limpiaparabrisas de 400 cm, 12 conectores de manguera de limpiaparabrisas (4 piezas tipo T; 4 piezas tipo Y; 4 piezas tipo I)
4 piezas tipo Y
4pcs I type
4 piezas tipo T
Lee
Comentado en Australia el 13 de mayo de 2024
It came quick and was exactly as described,
Jeffrey D.
Comentado en los Estados Unidos el 10 de octubre de 2024
After leaving my car sitting idle for a month I found that my windshield sprayers we no longer working. After some investigating I found that a squirrel had taken up residence in my engine compartment and decided to do some redecorating.Fix seemed easy enough to DIY, I put in an order for the kit and it was quickly delivered. The pieces were easy to replace and joint into the undamaged portions and my windshield sprayers are still functioning as they should years after.
Edmundo
Comentado en México el 1 de mayo de 2023
Es lo que necesitaba y llego a tiempo 👍
Felipe
Comentado en México el 26 de febrero de 2023
Excelente
Nonizi
Comentado en Arabia Saudita el 19 de diciembre de 2023
The items was as described, thanks
Gilberto Laureano Flores
Comentado en México el 5 de octubre de 2022
Facilidad para su ensamble
GaryArias
Comentado en México el 25 de octubre de 2022
Sellan bien las conexiones buen producto
Butch Simmz
Comentado en los Estados Unidos el 27 de septiembre de 2022
My washer nozzles weren't spraying any fluid onto the windshield when I pushed the lever on my steering column so I purchased this kit. After removing the hood insulator I saw that one of the plastic connectors linking the hose sections together had disintegrated rendering the entire system inoperative. I used a straight connector from the kit provided, and linked the two sections of hose together. I clipped about a quarter inch of brittle and flared out old hose from each end to ensure a tighter more secure, and leakproof fit. Luckily, the new connector was of a sufficient length that the two shortened hose ends could be pushed onto the flared ends of the new connector without any other modifications. I tested it and the system is now functioning perfectly. This procedure necessitated that the eight plastic clip/rivets securing the hood insulator to the vehicle be replaced, as they all broke when I pried them out of their holes. It is advisable to have a fresh package of these at the ready as the old ones are very likely not reusable. (each make of vehicle is likely different so check your fastener part numbers) I determined the part number for these fasteners and ordered a generic replacement that worked perfectly. I was able to purchase a package of 100 for $12.00, less money than the dealership would have charged for the 8 that were required for my vehicle! The total cost to repair thus was about $20 probably one tenth of what the dealership would have charged. The time required for the procedure was less than 30 minutes including removing/replacing the hood insulator and the hose repair itself. Another successful DIY endeavor!
Hyucksun Kwon
installed to my car and no leakage.
Productos recomendados
Mex $287.00
Mex $ 132 .00 Mex $132.00
Mex $649.04
Mex $ 318 .00 Mex $318.00
Mex $402.36
Mex $ 197 .00 Mex $197.00
Mex $303.36
Mex $ 148 .00 Mex $148.00