No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Kit de destornilladores Moray de iFixit - 32 puntas de precisión para smartphones, consolas de juegos y reparación de pequeños aparatos electrónicos
- Estuche magnetizado de fácil apertura
- Tapa con bandeja de clasificación incorporada
- Destornillador de precisión de 4 mm con herramienta de expulsión de la tarjeta SIM integrada
- Treinta y dos puntas de destornillador de 4 mm
Te presentamos al Moray, el hermano ligeramente mayor del Minnow. Con unas dimensiones portátiles de 0.9" x 3.1" x 4.9", la Moray es la herramienta perfecta para el día a día o para evitar que tus cosas se conviertan en chatarra.
Las puntas estándar y de seguridad, como las Phillips y las Pentalobes, le permitirán acceder a la mayoría de los dispositivos electrónicos y a los pequeños electrodomésticos, y un surtido de puntas hexagonales y especiales resultan útiles para los muebles y los dispositivos más antiguos. Tanto si eres un profesional de la reparación como un guerrero de fin de semana, el kit Moray tiene lo que necesitas para desmontar y reparar smartphones, portátiles, consolas de juegos nuevas y antiguas, electrodomésticos y mucho más.
Nuestro mango de puntas de precisión de 4 mm tiene un pasador de expulsión SIM integrado, un casquillo de puntas magnético, una empuñadura moleteada y una parte superior giratoria, y las 32 puntas de precisión tienen un vástago hexagonal de 4 mm y cuellos largos de gran alcance.
Konstantin
Comentado en México el 10 de enero de 2025
The iFixit Moray screwdriver set looks nice but its fatal flaw to me is that it lacks the hexagonal 2mm key. It includes 1.5mm, goes to 2.5mm then 3 and 4mm and at the end of the same row of bits is an obscure cross bit that no one ever needs. Where is the 2mm??? iFixit? Cmoon maan.The sole reason to the aquisition of this set was the idea to use it to assemble 3d printers and the standart M3 screw uses 2mm hex key.With all the obscure bits that are included the lack of the hex 2mm is really feels like gaslighting.The magnetic case is nice, the other bits are nice , i think ...
Timothy Dineen
Comentado en Canadá el 18 de agosto de 2024
I have had lower cost tool sets, and that lower cost always meant lower quality. I got this set because people I work with swore by it.The bits don't start falling apart when they are being used. There's no shredding of metal, no deformation of the bits at all. These are high quality tools that will last a long time. Well worth the extra money.
Ralf mx
Comentado en México el 16 de diciembre de 2024
Están de super calidad, nada que ver con los desarmadores chinos.
Alejandro Juarez Garcia
Comentado en México el 16 de octubre de 2024
Un buen complemento de desarmadores si ya tienes unos IFixit.
Client d'
Revisado en Bélgica el 5 de septiembre de 2024
On voit bien que c’est de la qualité
H. ALASHOUR
Comentado en Arabia Saudita el 22 de octubre de 2023
If you need a precision screw bits look no further. The kit comes in standard bit sizes so you can use them with other grips. Unlike those cheap screw bits made from cheap alloy that break easily, these are made from hardened steel. Do yourself a favor and get these instead.
MEHMET BASARANEL
Comentado en Turquía el 20 de septiembre de 2023
Ürünü denemek için aldım gözlük vidasını sıkarken biraz duz ince uc yamuldu
FrankMckna
Comentado en México el 10 de febrero de 2022
Soy nuevo con la marca, pero tenía tiempo siguiéndole, hace poco menos del mes compré el kit, y no me ha decepcionado, tiene todo lo necesario para un trabajo de reparación de celulares, computadoras y consolas de videojuego, me atrevería a decir que tiene uso para electrónica en general.Excelente calidad de materiales y construcción.20/10.
Eggzito
Comentado en México el 16 de diciembre de 2022
excelente juego de desarmadores , ya repare varios artículos y las puntas siguen igual de resistentes . La calidad es excelente hasta en el estuche. Lo recomiendo al 100.
Luis R.
Comentado en México el 1 de abril de 2022
Es un excelente Kit de trabajo, super recomendado.
Dmitri
Comentado en los Estados Unidos el 13 de mayo de 2021
I bought this set to replace an older screwdriver set that I had purchased a couple years ago. I was working on a DS Lite project that proved too much for the older set because it started shredding the bits, rendering them unusable. Only time will tell how the bits from this iFixit kit hold up, but so far they've been able to do the job that my last set failed at. I'm not sure how it works through Amazon, but iFixit provides a lifetime warranty on their products so if the bits start getting shredded I'm assuming they'll replace them, or I can at least go to a hardware store to buy replacement 4mm bits and they'll fit perfectly into the case and driver.In terms of value, my last set was cheaper but it also came with less bits, but a metal driver. In terms of bits-per-dollar, this is about the same value. You can buy cheaper sets that come with quite a bit more bits, but the cases aren't always as nice, and the quality of those bits can be questionable. At the very least, with this iFixit kit you get a nice case that can also be used as an organizer for screws (it works very well for that, might I add), lifetime warranty, and at least decent-quality bits.I was skeptical about the plastic driver but it actually feels pretty sturdy and has better grip, more girth, and a stronger magnetic connection that my last set had so all-in-all I actually prefer this plastic driver to my previous metal one. If I find myself using this a lot, I might buy the aluminum driver from iFixit for $10 but for now I really don't feel the need to do that. This plastic driver has a compartment for storing up to 3 bits as well as an included SIM card release tool. I don't use that, but I can see how it'd be useful.I was originally deciding between this one and the Mako set. That one has more bits, an aluminum driver, and an extender so overall if everything else is of comparable quality then that one is definitely a better value for $35. However, I value small form factors, portability, and not having unnecessary things lying around that I won't be making use of, so for me I think this is a better fit. I'm mostly using it for retro Nintendo handheld console repairs, and the variety of phillips and tri-wing bits that come with this is plenty for my needs. I've only used it for two projects, but overall I'm really happy with it and recommend it if you're on the fence because for $20 it's a good package. If I find that over time this is a really disappointing product then I'll adjust my review.
Isra
Comentado en México el 16 de septiembre de 2021
Excelente producto
Productos recomendados
Mex $1,118.49
Mex $ 559 .00 Mex $559.00
Mex $219.00
Mex $ 127 .00 Mex $127.00