No hay artículos en el carro
No hay artículos en el carro
Kit de arnés de cableado de control remoto de barra de luces LED, 4 cables
Tipo: Cableado de 4 cables (control de 4 luces)
Longitud del cableado: aproximadamente 3.5 metros.
Grosor del cable principal: 14 AWG (aproximadamente 2 cuadrados).
Grosor del subcable: 16 AWG (aproximadamente 1.27 cuadrados).
Voltaje de funcionamiento: 12 V CC.
Potencia máxima: soporte máximo para 300 W (cuando 4 lámparas conectadas en paralelo). Lámpara individual que funciona por debajo de 150 W.
Corriente máxima de trabajo: 40 A.
Relé: fusible de hoja de 40 A.
Funcionamiento del interruptor: con un control de interruptor y soporte para trabajar con interruptor remoto
Interruptor de control remoto de 4 modelos: encendido/apagado/parpadeo rápido/parpadeo lento.
Distancia de control remoto: dentro de aproximadamente 30 metros.
Material del núcleo: cobre.
Material de la manga: funda de PVC.
Índice de impermeabilidad: IP67.
Temperatura de trabajo más alta: 85 ℃.
Enchufe: enchufe universal.
El paquete incluye:
1 kit de arnés de cableado de interruptor, 4 cables.
1 mando a distancia.
1 fusible de hoja de seguridad.
Nota:
1. Combina la dureza del cableado con el voltaje de funcionamiento correcto. Funciona a voltaje de 12 V CC, 24 V CC necesita reemplazar el relé.
2. Termina la instalación por profesionales o instala el arnés de cableado bajo la guía de profesionales.
3. Medición manual, puede haber un margen de error de 1 a 3 mm.
4. Debido a la diferencia entre los diferentes monitores, la imagen puede no reflejar el color real del artículo. Garantizamos que el estilo es el mismo que se muestra en la imagen.
Michael Erchul
Comentado en los Estados Unidos el 5 de enero de 2025
I've installed a few of these and I may get a 2nd one of these just because. Its nice! It has a good jacket to protect the wires and make pulling it through easier. I believe its 14ga wiring. The lights van either be on or strobe through the controller. If you lose the remote, which you will..... It has buttons on the harness to operate it also.Very nice!
T_5678
Comentado en los Estados Unidos el 31 de enero de 2025
This is 5 stars, easy. It is exactly as described. Easy to connect. Well made enough to work. The wires had plenty of reach. I had to splice into it, because I only got the 1 lead version. Easy enough to do and it works great.
SD
Comentado en los Estados Unidos el 3 de enero de 2025
The wiring harness for 1 light that I received was exactly as pictured. It feels like decent quality wire and it is all heatshrink'd and sleeved nicely.The wire lengths are all correct and there are female spade connectors on the ends for the load/light. The way the switch and remote are wired is also very nice. The remote box has two connectors and connects in between the harness and the switch, so you could theoretically connect just the switch, or just the remote, or both. Having the remote wired in gives you the added option of slow and fast strobe, but I haven't been able to test this yet. It also came with three 30A fuses.
Christian
Comentado en los Estados Unidos el 14 de enero de 2025
Needed this for my truck light bar since its way easier than finding a grommet to push through or drilling through the firewall. Hooks right up to the battery and the light bar and the remote controls the circuit. It also has a push button on it. Its good wiring, and you get enough of a run that you'll be zipping it up under the hood too if you just have a small space to deal with. Has a fuse to let you know if you are asking too much of it or if your lights are shorting. Very nice and would get again.
Zacmac911
Comentado en los Estados Unidos el 13 de enero de 2025
I installed this item on my sons Jeep lightbars. The wires were long enough to reach easy and the connections were well made. The remote feature with strobe options was a great addition.I would recommend this item.
Productos recomendados
Mex $1,612.76
Mex $ 725 .00 Mex $725.00
Mex $311.70
Mex $ 171 .00 Mex $171.00
Mex $159.00
Mex $ 90 .00 Mex $90.00