No hay artículos en el carro
No hay artículos en el carroRick Burghardt
Comentado en los Estados Unidos el 24 de enero de 2025
Unable to program both remotes.
chris
Comentado en los Estados Unidos el 16 de noviembre de 2024
Perfect replacements or additionals. The website to program your remotes comes with every purchase. They are my go to for replacement remotes.
Steve
Comentado en los Estados Unidos el 24 de octubre de 2024
Exactly what I ordered and worked with my truck, 02 chevy s10
J. Ladson
Comentado en los Estados Unidos el 12 de septiembre de 2024
Very easy to program
JD
Comentado en los Estados Unidos el 9 de enero de 2018
My old controller just wasn't working that well. Dropping these things over the years seems to effect them :)New ones work great. No direction for syncing. I googled it. Takes about 10 - 15 seconds to syncCLOSE all doors.INSERT key into the ignition.PRESS and HOLD the power UNLOCK button on driver’s side door panel. DO NOT release until instructed to do so in Step 5.Quickly TURN the Ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key)RELEASE the power UNLOCK button on the Driver’s side door panel. The vehicle should respond by locking and unlocking automatically. (A) If locks cycle then CONTINUE to Step 6. (B) If the door locks begin to LOCK and UNLOCK BEFORE releasing the unlock button then the vehicle has not entered Programming Mode and you must START OVER. REMOVE key, OPEN door and RETURN to Step 1. (C) If the vehicle continues to LOCK and UNLOCK before releasing the UNLOCK button then there is a problem with the vehicle’s system and remotes must be programmed by a certified professional. If you are unable to get the door locks to cycle then you are turning the key too quick, too slow, there’s a problem with the vehicle’s system, or the vehicle is not equipped with a factory keyless entry system.HOLD the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds.Now REPEAT Step 6 for all additional remotes to be programmed, including working ones
Productos recomendados